|Table of Contents|

Citation:
　Bin Liu,Van Tuyen Doan,Y. Garbatov,et al.Study on Ultimate Compressive Strength of Aluminium-Alloy Plates and Stiffened Panels[J].Journal of Marine Science and Application,2020,(4):534-552.[doi:10.1007/s11804-020-00170-2]
Click and Copy

Study on Ultimate Compressive Strength of Aluminium-Alloy Plates and Stiffened Panels

Info

Title:
Study on Ultimate Compressive Strength of Aluminium-Alloy Plates and Stiffened Panels
Author(s):
Bin Liu1;  Van Tuyen Doan1; 2;  Y. Garbatov3;  Weiguo Wu1;  C. Guedes Soares3
Affilations:
Author(s):
Bin Liu1;  Van Tuyen Doan1; 2;  Y. Garbatov3;  Weiguo Wu1;  C. Guedes Soares3
1 Green & Smart River-Sea-Going Ship, Cruise and Yacht Research Centre, Wuhan University of Technology, Wuhan 430063, China;
2 Faculty of Shipbuilding, Vietnam Maritime University, Haiphong, Vietnam;
3 Centre for Marine Technology and Ocean Engineering(CENTEC), Instituto Superior Técnico, Universidade de Lisboa, 1049-001 Lisbon, Portugal
Keywords:
Ultimate strength; Compressive load; Stiffened panel; Aluminium alloy; Review
分类号:
-
DOI:
10.1007/s11804-020-00170-2
Abstract:
This work reviews the ultimate compressive strength of aluminium plates and stiffened panels. The effect of boundary condition, initial imperfection, welding-induced residual stress and heat-affected zone are discussed. As the effect of manufacturing technology lacks in the literature, this effect is analysed employing the finite element method, considering the technology of welding and integrated extrusion. The numerical analyses have shown that the ultimate strength of the integrated extruded stiffened panel is relatively higher than the one of the traditional welded panel.

References:

Aalberg A, Langseth M, Larsen PK (2001) Stiffened aluminium panels subjected to axial compression. Thin-Walled Struct 39:861-885. https://doi.org/10.1016/S0263-8231(01)00021-0
Benson S, Downes J, Dow RS (2011) Ultimate strength characteristics of aluminium plates for high-speed vessels. Ships Offshore Structures 6(1-2):67-80. https://doi.org/10.1080/17445302.2010.529696
Benson S, AbuBakar A, Dow RS (2013a) A comparison of computational methods to predict the progressive collapse behaviour of a damaged box girder. Eng Struct 48:266-280. https://doi.org/10.1016/j.engstruct.2012.09.031
Benson S, Downes J, Dow RS (2013b) Load shortening characteristics of marine-grade aluminium alloy plates in longitudinal compression. Thin-Walled Struct 70:19-32. https://doi.org/10.1016/j.tws.2013.04.006
Benson S, Downes J, Dow RS (2013c) Compartment level progressive collapse analysis of lightweight ship structures. Mar Struct 31:44-62. https://doi.org/10.1016/j.marstruc.2013.01.001
Benson S, Downes J, Dow RS (2015) Overall buckling of lightweight stiffened panels using an adapted orthotropic plate method. Eng Struct 85:107-117. https://doi.org/10.1016/j.engstruct.2014.12.017
Chen BQ, Guedes Soares C (2019) Numerical investigation on weld-induced imperfections in aluminium ship plates. J Offshore Mech Arctic Eng 141(6):061605. https://doi.org/10.1115/1.4043778
Chen Q, Moan T (2010) Material softening effect on ultimate strength of stiffened aluminium panels. In:In:Proceedings of the 29th International Conference on Ocean. Offshore and Arctic Engineering (OMAE2010), Shanghai. https://doi.org/10.1115/OMAE2010-20979
Collette M (2005) Strength and reliability of aluminium stiffened panels, PhD thesis, School of Marine Science and Technology, Faculty of Science, Agriculture and Engineering. University of Newcastle, Newcastle, UK
Collette MD (2007) The impact of fusion welds on the ultimate strength of aluminum structures. In:Proceedings of the 10th International Symposium on Practical Design of Ships and Other Floating Structures, Texas, USA. 10.1.1.469.6499
Collette M, Wang X, J. Li, J Walters, Yen T (2008) Ultimate strength and optimisation of aluminium extrusions, SAIC, MD 20716, USA, Ship Structure Committee Final Report No SSC-454
Conley WF, Becker LA, Allnutt RB (1963) Buckling and ultimate strength of plating loaded in edge compression. Progress report 2-unstiffened panels, structural mechanics laboratory, Department of the Navy-David Taylor Model Basin, USA no. 1682
Doan VT, Liu B, Garbatov Y, Wu W, Guedes Soares C (2020) Strength assessment of aluminium and steel stiffened panels with openings on longitudinal girders. Ocean Eng 200:107047. https://doi.org/10.1016/j.oceaneng.2020.107047
Eurocode 9 (2009) Design of aluminium structures-part 1-1:general structural rules, EN1999-1-1:2007+A1. In:European Committee for Standardization (CEN). Belgium, Brussels
Farajkhah V, Guedes Soares C (2017) Finite element study on the ultimate strength of aluminum plates joined by friction stir welding. In:Guedes Soares C, Garbatov Y (eds) Progress in the Analysis and Design of Marine Structures. Taylor & Francis, London, pp 609-615
Farajkhah V, Liu Y (2016a) Effect of fabrication methods on the ultimate strength of aluminum hull girders. Ocean Eng 114(Supplement C):269-279. https://doi.org/10.1016/j.oceaneng.2016.01.029
Farajkhah V, Liu Y (2016b) Effect of metal inert gas welding on the behaviour and strength of aluminum stiffened plates. Mar Struct 50:95-110. https://doi.org/10.1016/j.marstruc.2016.07.005
Farajkhah V, Liu Y, Gannon L (2016) Finite element study of 3D simulated welding effect in aluminium plates. Ships Offshore Structures 12(2):196-208. https://doi.org/10.1080/17445302.2015.1123865
Faulkner D (1975) A review of effective plating for use in the analysis of stiffened plating in bending and compression. J Ship Res 19(1):1-17
Guedes Soares C, Soreide TH (1983) Behaviour and design of stiffened plates under predominantly compressive loads. Int Shipbuild Prog 30(341):13-26
Guedes Soares C, Dogliani M, Ostergaard C, Parmentier G, Pedersen PT (1996) Reliability based ship structural design. Trans Soc Naval Architects Mar Eng (SNAME) 104:357-389
ISSC (2018) Report of technical committee:ultimate strength Ⅲ.1. In:Kaminski ML, Rigo P (eds) In:proceedings of the 20th international ship and offshore structures congress. The Netherlands, Amsterdam
Kasten, M (2016) Strength of aluminum vs strength of steel. http://www.kastenmarine.com/alumVSsteel.htm
Khedmati MR, Ghavami K (2009) A numerical assessment of the buckling/ultimate strength characteristics of stiffened aluminium plates with fixed/floating transverse frames. Thin-Walled Struct 47(11):1373-1386. https://doi.org/10.1016/j.tws.2009.03.008
Khedmati MR, Zareei MR, Rigo P (2009) Sensitivity analysis on the elastic buckling and ultimate strength of continuous stiffened aluminium plates under combined in-plane compression and lateral pressure. Thin-Walled Struct 47(11):1232-1245. https://doi.org/10.1016/j.tws.2009.04.010
Khedmati MR, Bayatfar A, Rigo P (2010a) Post-buckling behaviour and strength of multi-stiffened aluminium panels under combined axial compression and lateral pressure. Mar Struct 23(1):39-66. https://doi.org/10.1016/j.marstruc.2009.10.003
Khedmati MR, Zareei MR, Rigo P (2010b) Empirical formulations for estimation of ultimate strength of continuous stiffened aluminium plates under combined in-plane compression and lateral pressure. Thin-Walled Struct 48(3):274-289. https://doi.org/10.1016/j.tws.2009.10.001
Khedmati MR, Pedram M, Rigo P (2012) The effects of geometrical imperfections on the ultimate strength of aluminium stiffened plates subject to combined uniaxial compression and lateral pressure. Ships Offshore Struct 9(1):88-109. https://doi.org/10.1080/17445302.2012.726761
Khedmati MR, Memarian HR, Fadavie M, Zareei MR (2014) Empirical formulations for estimation of ultimate strength of continuous aluminium stiffened plates under combined transverse compression and lateral pressure. Ships Offshore Struct 11(3):258-277. https://doi.org/10.1080/17445302.2014.985430
Khedmati MR, Memarian HR, Fadavie M, Zareei MR (2015) Ultimate strength of continuous stiffened aluminium plates under combined biaxial compression and lateral pressure. Latin Am J Solids Struct 12(9):1698-1720. https://doi.org/10.1590/1679-78251516
Kim DK, Lim HL, Yu SY (2018) A technical review on ultimate strength prediction of stiffened panels in axial compression. Ocean Eng 170:392-406. https://doi.org/10.1016/j.oceaneng.2018.10.022
Kristensen OHH (2001) Ultimate capacity of aluminium plates under multiple loads considering HAZ properties, PhD thesis, Department of Marine Structures, Faculty of Marine Technology. Norwegian University of Science and Technology, Trondheim, Norway
Li C, Zhu Z, Ren H, Guedes Soares C (2017) Finite element analysis of the ultimate strength of aluminium-stiffened panels with fixed and floating transverse frames. J Offshore Mech Arctic Eng 139(4):041401. https://doi.org/10.1115/1.4036111
Li C, Ren H, Zhu Z, Guedes Soares C (2018) Numerical investigation on the ultimate strength of aluminium integrally stiffened panels subjected to uniaxial compressive load. Thin-Walled Struct 127:221-234. https://doi.org/10.1016/j.tws.2018.01.003
Liu B, Guedes Soares C (2020) Ultimate strength assessment of ship hull structures subjected to cyclic bending moments. Ocean Eng 215:107685. https://doi.org/10.1016/j.oceaneng.2020.107685
Liu B, Villavicencio R, Liu K, Zhu L, Guedes Soares C (2019) Response of an aluminum stiffened plate under extreme slamming loadings. J Offshore Mech Arctic Eng 141(5):051606. https://doi.org/10.1115/1.4042389
Liu B, Liu K, Villavicencio R, Dong A, Guedes Soares C (2020) Experimental and numerical analysis of the penetration of welded aluminium alloy panels. Ships Offshore Structures:1-13. https://doi.org/10.1080/17445302.2020.1736856
Lloyd’s Register (2019a) Rules and regulations for the classification of special service craft. Lloyd’s Register, London
Lloyd’s Register (2019b) Rules for the manufacture, testing and certification of materials. Lloyd’s Register, London
Mofflin, DS (1983). Plate buckling in steel and aluminium, PhD thesis, Department of Engineering, Cambridge University, UK
Mohammadi M, Khedmati MR, Bahmyari E (2018) Elastic local buckling strength analysis of stiffened aluminium plates with an emphasis on the initial deflections and welding residual stresses. Ships Offshore Struct 14(2):125-140. https://doi.org/10.1080/17445302.2018.1482061
Paik JK (2007a) Characteristics of welding induced initial deflections in welded aluminum plates. Thin-Walled Struct 45(5):493-501. https://doi.org/10.1016/j.tws.2007.04.009
Paik JK (2007b) Empirical formulations for predicting the ultimate compressive strength of welded aluminum stiffened panels. Thin-Walled Struct 45(2):171-184. https://doi.org/10.1016/j.tws.2007.02.003
Paik JK (2018). Ultimate limit state analysis and design of plated structures. 2nd ed. John Wiley & Sons
Paik J, Duran A (2004) Ultimate strength of aluminum plates and stiffened panels for marine applications. Mar Technol 41:108-121
Paik JK, Hughes OF, Hess PE, Renaud C (2005a) Ultimate limit state design technology for aluminium multi-hull ship structures. SNAME Trans 113:270-305
Paik JK, van der Veen S, Duran A, Collette M (2005b) Ultimate compressive strength design methods of aluminum welded stiffened panel structures for aerospace, marine and land-based applications:a benchmark study. Thin-Walled Struct 43(10):1550-1566. https://doi.org/10.1016/j.tws.2005.06.003
Paik JK, Thayamballi AK, Ryu JY, Jang JH, Seo JK, Park SW, Seo SK, Renaud C, Cojeen HP, Kim NI (2006) The statistics of weld induced initial imperfections in aluminium stiffened plate structures for marine applications. Trans R Instit Naval Architects Part A:International Journal of Maritime Engineering 148:19-62
Paik JK, Thayamballi AK, Ryu JY, Jang JH, Seo JK, Park SW, Soe SK, Renaud C, Kim NI (2008) Mechanical collapse testing on aluminum stiffened panels for marine applications. Ship structure committee final report no. SSC-451, Pusan
Paik JK, Kim BJ, Sohn JM, Kim SH, Jeong JM, Park JS (2012) On buckling collapse of a fusion-welded aluminum-stiffened plate structure:an experimental and numerical study. J Offshore Mech Arctic Eng 134(2):021402. https://doi.org/10.1115/1.4004511
Paulo RMF, Teixeira-Dias F, Valente RAF (2013) Numerical simulation of aluminium stiffened panels subjected to axial compression:sensitivity analyses to initial geometrical imperfections and material properties. Thin-Walled Struct 62:65-74. https://doi.org/10.1016/j.tws.2012.07.024
Paulo RMF, Carlone P, Valente RAF, Teixeira-Dias F, Palazzo GS (2014) Influence of friction stir welding residual stresses on the compressive strength of aluminium alloy plates. Thin-Walled Struct 74:184-190. https://doi.org/10.1016/j.tws.2013.09.012
Pedram M, Khedmati MR (2014) The effect of welding on the strength of aluminium stiffened plates subject to combined uniaxial compression and lateral pressure. Int J Naval Archit Ocean Eng 6(1):39-59. https://doi.org/10.2478/ijnaoe-2013-0162
Ramberg W, Osgood WR (1943) Description of stress-strain curves by three parameters, Washington, USA No 902
Ren H, Liu Y, Li C, Zhang X, Wu Z (2018) Numerical investigation of ultimate strength of stiffened plates with various cross-section forms. In:Proceedings of the 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE), Madrid. https://doi.org/10.1115/OMAE2018-77756
Rigo P, Sarghiuta R, Estefen S, Lehmann E, Otelea SC, Pasqualino I, Simonsen BC, Wan Z, Yao T (2003) Sensitivity analysis on ultimate strength of aluminium stiffened panels. Mar Struct 16(6):437-468. https://doi.org/10.1016/j.marstruc.2003.09.002
Rønning L, Aalberg A, Larsen PK (2010) An experimental study of ultimate compressive strength of transversely stiffened aluminium panels. Thin-Walled Struct 48(6):357-372. https://doi.org/10.1016/j.tws.2010.01.015
Seifi R, Khoda-yari N (2011) Experimental and numerical studies on buckling of cracked thin-plates under full and partial compression edge loading. Thin-Walled Struct 49(12):1504-1516. https://doi.org/10.1016/j.tws.2011.07.010
Shesharma P, Collette M, Harrington J (2010) Effect of welded properties on aluminium structures, USA no. SSC-4
Sielski RA (2008) Research needs in aluminum structure. Ships Offshore Struct 3(1):57-65. https://doi.org/10.1080/17445300701797111
Syrigou MS, Dow RS (2018) Strength of steel and aluminium alloy ship plating under combined shear and compression/tension. Eng Struct 166:128-141. https://doi.org/10.1016/j.engstruct.2018.03.051
Wang X, Sun H, Akiyama A, Du A (2005) Buckling and ultimate strength of aluminium plates and stiffened panels in marine structures. In:the 5th International Forum on Aluminium Ships, Tokyo, Japan
Xu MC, Yanagihara D, Fujikubo M, Guedes Soares C (2013) Influence of boundary conditions on the collapse behaviour of stiffened panels under combined loads. Mar Struct 34:205-225. https://doi.org/10.1016/j.marstruc.2013.09.002
Yao T, Fujikubo M (2016) Buckling and ultimate strength of ship and ship-like floating structures. Elsevier
Zha Y, Moan T (2001) Ultimate strength of stiffened aluminium panels with predominantly torsional failure modes. Thin-Walled Struct 39:631-648. https://doi.org/10.1016/S0263-8231(01)00027-1
Zha Y, Moan T (2003) Experimental and numerical prediction of collapse of flat bar stiffeners in aluminum panels. Struct Eng 129:160-168. https://doi.org/10.1061/(ASCE)0733-9445/2003/129:2/160
Zhang S (2015) A review and study on ultimate strength of steel plates and stiffened panels in axial compression. Ships and Offshore Structures, 1-11. https://doi.org/10.1080/17445302.2014.992610

Memo

Memo:
Received date:2020-03-15;Accepted date:2020-08-30。
Foundation item:This work is supported by the “National Natural Science Foundation of China (Grant No. 51709212)”. This work also contributes to the Strategic Research Plan of the Centre for Marine Technology and Ocean Engineering, which is financed by the Portuguese Foundation for Science and Technology (Fundação para a Ciência e Tecnologia-FCT) under contract UIDB/UIDP/00134/2020.
Corresponding author:Bin Liu,liubin8502@whut.edu.cn
Last Update: 2021-04-07