|Table of Contents|

Citation:
 M. Tekgoz,Y. Garbatov,C. Guedes Soares.Review of Ultimate Strength Assessment of Ageing and Damaged Ship Structures[J].Journal of Marine Science and Application,2020,(4):512-533.[doi:10.1007/s11804-020-00179-7]
Click and Copy

Review of Ultimate Strength Assessment of Ageing and Damaged Ship Structures

Info

Title:
Review of Ultimate Strength Assessment of Ageing and Damaged Ship Structures
Author(s):
M. Tekgoz Y. Garbatov C. Guedes Soares
Affilations:
Author(s):
M. Tekgoz Y. Garbatov C. Guedes Soares
Centre for Marine Technology and Ocean Engineering(CENTEC), Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais, 1049-001 Lisbon, Portugal
Keywords:
Marine corrosionDamageUltimate streng
分类号:
-
DOI:
10.1007/s11804-020-00179-7
Abstract:
The objective of this work is to provide an overview of the ultimate strength assessment of ageing and damaged ship structures in the last decades. Particular attention is paid to the ultimate strength of plates, stiffened panels, box girders, and entire ship hull structures subjected to corrosion degradation, fatigue cracking, and mechanical damage caused by accidental loading or impact. A discussion on the effect of the cyclic load on the plate rigidity, re-yielding, and ultimate load capacity on the ship hull girder is also part of the present study. Finally, some conclusions and discussions about potential future work are provided, identifying that more studies about the impact of corrosion degradation on the structural behaviour of the stiffened panels and the overall hull girders are needed. Studies related to the dynamic collapse behaviour of corroded and damaged ship structures under time-variant load also requires additional attention.

References:

Abdussamie N, Ojeda R, Dabaos M (2018) ANFIS method for ultimate strength prediction of unstiffened plates with pitting corrosion. Ships Offshore Struct 13:540-550
ABS (2002) ABS database of corrosion wastage for oil tankers, American Bureau of Shipping
Ahmmad MM, Sumi Y (2009) Strength and deformability of corroded steel plates under quasi-static tensile load. J Mar Sci Technol 15(1):1-15
Akpan UO, Koko TS, Ayyub B, Dunbar TE (2002) Risk assessment of aging ship hull structures in the presence of corrosion and fatigue. Mar Struct 15(3):211-231
Alinia MM, Hoseinzadeh SAA, Habashi HR (2007a) Influence of central cracks on buckling and post-buckling behaviour of shear panels. Thin-Walled Struct 45:422-431
Alinia MM, Hosseinzadeh SAA, Habashi HR (2007b) Numerical modelling for buckling analysis of cracked shear panels. Thin-Walled Struct 45(12):1058-1067
Amante DO, Chujutali JA, Estefen SF (2015) Experimental and numerical analyses of dented stiffened panels. J Offshore Mech Arct Eng 137(3):031601
Amlashi HKK, Moan T (2005) On the strength assessment of pitted stiffened plates under biaxial compression loading. In:Proceedings of the 24th International Conference on Offshore Mechanics and Arctic Engineering, 3, 83-92
Bayatfar A, Khedmati MR, Rigo P (2014) Residual ultimate strength of cracked steel unstiffened and stiffened plates under longitudinal compression. Thin-Walled Struct 84:378-392
Bayatfar A, Matagne J and Rigo P (2011) Influence of transverse cracks on ultimate strength of a steel plate under compression, In:Proceedings of the 30th International Conference on Ocean, Offshore and Arctic Engineering, 2, 643-650
Benson S, Abubakar A, Dow RS (2013) A comparison of computational methods to predict the progressive collapse behaviour of a damaged box girder. Eng Struct 48:266-280
Brighenti R (2005) Numerical buckling analysis of compressed or tensioned cracked thin plates. Eng Struct 27:265-276
Campanile A, Piscopo V, Scamardella A (2016) Incidence of residual stresses and steel properties variability on corroded bulk carrier reliability. Ocean Eng 1281:58-80
Chujutalli JH, Estefen SF, Guedes Soares C (2020) Indentation parameters influence on the ultimate strength of panels for different stiffeners. J Constr Steel Res 170:106097
Corak M, Parunov J (2019) Structural reliability of oil tanker in the Adriatic Sea damaged in collision and exposed to combined bending. J Offshore Mech Arct Eng 142(3):1-32
Cui C, Yang P, Xia T, Du J (2016) Assessment of residual ultimate strength of cracked steel plates under longitudinal compression. Ocean Eng 121:174-183
Cui J, Wang DY (2020) An experimental and numerical investigation on ultimate strength of stiffened plates with opening and perforation corrosion. Ocean Eng 205:107282
Czujko J, Bayatfar A, Smith M, Xu MC, Wang D, Lützen M, Saad-Eldeen S, Yanagihara D, Notaro G, Qian X, Park JS, Broekhuijsen J, Benson S, Pahos S, Boulares J (2018) Committee Ⅲ.1 Ultimate Strength. In:Proceedings of the 20th International Ship and Offshore Structures Congress (ISSC 2018), M. Kaminski and P. Rigo, IOS Press Ebooks, 1, 335-441
Czujko J, Brubak L, Czaban J, Johnson M, Kim GS, Pahos SJ, Tabri K, Tang WY, Waegter J, Yamada Y (2015) Committee V.1 on accidental limit states. In:Proceedings of the 19th international ship and offshore structures congress (ISSC 2015), C. Guedes Soares and Y. Garbatov, London, Taylor & Francis, 519-590
Czujko J, Buannic N, Ehlers S, Hung C-F, Klaebo F, Pahos SJ, Riley M, Tang W, Vredeveldt A, Waegter J (2012) Committee V.1 on damage assessment following accidents. In:Proceedings of the 18th international ship and offshore structures congress (ISSC 2012), W. Fricke and R. Bronsart, Hamburg, Germany, Schiffbautechnische Gesellschaft e V, 1-65
Daidola J, Parente J, Orisamolu I (1997) Residual strength assessment of pitted plate panels. Ship Structural Committee, Report SSC-394
Derbanne Q, Lauzon JD, Bigot F, Malenica S (2016) Investigations of the dynamic ultimate strength of a ship’s hull girder during whipping. In:Proceedings of PRADS2016, Denmark
Domzalicki P, Skalski I, Guedes Soares C, Garbatov Y (2009) Large scale corrosion tests, analysis and design of marine structures. In:Guedes Soares C, Das PK (eds) Analysis and design of marine structures. Taylor & Francis Group, London, UK, pp 193-198
Dong Y, Frangopol DM (2015) Risk-informed life-cycle optimum inspection and maintenance of ship structures considering corrosion and fatigue. Ocean Eng 101:161-171
Dunbar TE, Pegg N, Taheri F, Jiang L (2004) A computational investigation of the effects of localized corrosion on plates and stiffened panels. Mar Struct 17(5):385-402
Ehlers S, Benson S, Misirlis K (2013) Ultimate strength of intact and damaged LNG vessel subjected to sub-zero temperature, collision and grounding of ships and offshore structures, I, pp 289-296
Feng L, He J, Hu L, Shi H, Yang S (2020) A parametric study on effects of pitting corrosion on steel plate’s ultimate strength. Appl Ocean Res 95:102026
Fujikubo M, Takemura K, Oka S, Alie AZM, Ijima K (2012a) Residual Hull girder strength of asymmetrically damaged ships-influence of rotation of neutral axis due to damages. J Soc Naval Archit Ocean Eng 16:131-140
Fujikubo M, Takemura K, Oka S, Alie MZM, Iijima K (2012b) Residual hull girder strength of asymmetrically damaged ships. J Japan Soc Naval Archit Ocean Eng 16:131-140
Garbatov Y (2016) Fatigue strength assessment of ship structures accounting for a coating life and corrosion degradation. Int J Struc Integ 7(2):305-322
Garbatov Y, Guedes Soares C (2008) Corrosion wastage modelling of deteriorated bulk carrier decks. Int Shipbuild Prog 55(1-2):109-125
Garbatov Y, Guedes Soares C (2009a) Corrosion wastage statistics and maintenance planning of corroded hull structures of bulk carriers, analysis and design of marine structures. In:Guedes Soares C, Das PK (eds) Analysis and design of marine structures. Taylor & Francis Group, London, UK, pp 215-222
Garbatov Y, Guedes Soares C (2009b) Structural maintenance planning based on historical data of corroded deck plates of tankers. Reliab Eng Syst Saf 94(11):1806-1817
Garbatov Y, Guedes Soares C (2010) Maintenance Planning for the Decks of Bulk Carriers and Tankers, in:Furuta, H. Frangopol D. M. Shinozuka M. (eds) Reliability and Risk of Structures, Infrastructures and Engineering Systems. Taylor & Francis Group, London, pp 3517-3524
Garbatov Y, Guedes Soares C (2011) Reliability based maintenance of marine Structures. In:Guedes Soares C, Garbatov Y, Fonseca N, Teixeira AP (eds) Marine technology and Engineering, vol 2. Taylor & Francis Group, London, 1101-1120
Garbatov Y, Guedes Soares C (2016) Reliability of deteriorated marine structures based on measured data. Int Jf Maritime Eng 158(A4):A281-A288
Garbatov Y, Guedes Soares C (2017) Fatigue reliability of dented pipeline based on limited experimental data. Int J Press Vessel Pip 155:15-26
Garbatov Y, Guedes Soares C (2019) Spatial corrosion wastage modelling of steel plates exposed to marine environments. J Offshore Mech Arct Eng 141(3):031602
Garbatov Y, Guedes Soares C, Parunov J (2014a) Fatigue strength experiments of corroded small scale steel specimens. Int J Fatigue 59:137-144
Garbatov Y, Guedes Soares C, Parunov J, Kodvanj J (2014b) Tensile strength assessment of corroded small scale specimens. Corros Sci 85:296-303
Garbatov Y, Guedes Soares C, Wang G (2007) Nonlinear time-dependent corrosion wastage of deck plates of ballast and cargo tanks of tankers. J Offshore Mech Arct Eng 129(1):48-55
Garbatov Y, Parunov J, Kodvanj J, Saad-Eldeen S, Guedes Soares C (2016a) Experimental assessment of tensile strength of corroded steel specimens subjected to sandblast and sandpaper cleaning. Mar Struct 49:18-30
Garbatov Y, Saad-Eldeen S, Guedes Soares C, Parunov J, Kodvanj J (2019) Tensile test analysis of corroded cleaned aged steel specimens, corrosion engineering. Sci Technol 54(2):154-162
Garbatov Y, Tekgoz M, Guedes Soares C (2016b) Experimental and numerical strength assessment of stiffened plates subjected to severe non-uniform corrosion degradation and compressive load. Ships Offshore Struct 12(4):461-473
Gardiner C, Melchers R (2002) Corrosion of mild steel by coal and iron ore. Corros Sci 44:2665-2673
Gordo JM, Guedes Soares C (2000) Residual strength of damaged ship hulls. In:Proceedings of the IX International Maritime Association of Mediterranean Congress (IMAM2000) Ischia, Italy, 79-86
Goto Y, Toba Y, Matsuoka H (1995) Localization of plastic buckling patterns under cyclic loading. J Eng Mech 121(4):493-501
Guedes Soares C (1988) Uncertainty modelling in plate buckling. Struct Saf 5:17-34
Guedes Soares C, Garbatov Y (1996a) Fatigue reliability of the ship hull girder accounting for inspection and repair. Reliab Eng Syst Saf 51(3):341-351
Guedes Soares C, Garbatov Y (1996b) Reliability of maintained ship hulls subjected to corrosion. J Ship Res 40(3):235-243
Guedes Soares C, Garbatov Y (1997) Reliability assessment of maintained ship hulls with correlated corroded elements. Mar Struct 10(8-10):629-653
Guedes Soares C, Garbatov Y (1998a) Nonlinear time-dependent model of corrosion for the reliability assessment of maintained structural components. In:Lydersen S, Hansen GK, Sandtov HA (eds) Safety and reliability, vol 2. A. A. Balkema, Rotterdam, the Netherlands, 928-936
Guedes Soares C, Garbatov Y (1998b) Reliability of maintained ship hull girders subjected to corrosion and fatigue. Struct Saf 20(3):201-219
Guedes Soares C, Garbatov Y (1999a) Reliability of maintained ship hull girders of two bulk carriers designs subjected to fatigue and corrosion. J Ship Ocean Technol 3:27-41
Guedes Soares C, Garbatov Y (1999b) Reliability of maintained, corrosion protected plates subjected to non-linear corrosion and compressive loads. Mar Struct 12(6):425-445
Guedes Soares C, Garbatov Y, Zayed A (2013) Effect of environmental factors on steel plate corrosion under marine immersion conditions, corrosion engineering. Sci Technol 46(4):524-541
Guedes Soares C, Garbatov Y, Zayed A, Wang G (2005) Non-linear corrosion model for immersed steel plates accounting for environmental factors. Transac Soc Naval Archit Marine Eng 113:306-322
Guedes Soares C, Basu R, Simonsen BC, Egorov GV, Hung CF, Lindstrom P (2009a) Committee V.1:Damage Assessment After Accidental Events, In:Proceedings of 17th International Ship and Offshore Structures Congress (ISSC2009), C. Jang and S. Hong, Seoul, South Korea, University of Seoul, 2:1-73
Guedes Soares C, Garbatov Y, Zayed A, Wang G (2009b) Influence of environmental factors on corrosion of ship structures in marine atmosphere. Corros Sci 51(9):2014-2026
Guedes Soares C, Garbatov Y, Zayed A, Wang G (2008a) Corrosion wastage model for ship crude oil tanks. Corros Sci 50(11):3095-3106
Guedes Soares C, Luís RM, Teixeira AP, Quesnel T, Nikolov PI, Steen E, Khan IA, Toderan C, Olaru VD, Bollero A, Taczala M (2008b) Parametric study on the collapse strength of rectangular plates with localized imperfections under in-plane compression. Int Shipbuild Prog 55:63-5585
Guo J, Wang G, Ivanov L, Perakis AN (2008) Time-varying ultimate strength of aging tanker deck plate considering corrosion effect. Mar Struct 21(4):402-419
Guo J, Wang G, Perakis AN, Ivanov LD (2012) A study on reliability-based inspection planning-application to deck plate thickness measurement of aging tankers. Mar Struct 25:85-106
Hart D, Rutherford S, Wichham A (1986) Structural reliability analysis of stiffened panels. Transac Royal Institut Naval Archit 128:293-310
Heyer A, D’Souza F, Leon Morales CF, Ferrari G, de Wit JHW (2013) Ship ballast tanks a review from microbial corrosion and electrochemical point of view. Ocean Eng 70:188-200
H?fer T (2003) Tanker safety and coastal environment:Prestige, Erika, and what else? Environ Sci Pollut Res Int 10:1-5
Hu W, Lin Y, Yuan S, Z. H (2015) Constitutive models for regression of various experimental stress-strain relations. Int J Mech Sci 1-9:101-102
Hu Y, Cui WC, Pedersen PT (2004) Maintained ship hull girder ultimate strength reliability considering corrosion and fatigue. Mar Struct 17(2):91-123
Hua J, Cheng C (2013) Corrosion of high tensile steel on board bulk carrier loaded with coal of different origins. Ocean Eng 69:24-33
Huang W, Garbatov Y, Guedes Soares C (2014) Fatigue reliability of a web frame subjected to random non-uniform corrosion wastage. Struct Saf 48:51-62
Huang Y, Zhang G, Liu G, Zhang Q (2010) Ultimate strength assessment of hull structural plate with pitting corrosion danification under biaxial compression. Ocean Eng 37(17-18):1503-1512
Hussein AW, Guedes Soares C (2009) Reliability and residual strength of double hull tankers designed according to the new IACS common structural rules. Ocean Eng 36:1446-1459
Iijima K, Kimura K, Xu W, Fujikubo M (2011) Hydroelastoplasticity approach to predicting the post-ultimate strength behaviour of a Ship’s Hull girder in waves. J Mar Sci Technol 16(4):379-389
Iijima K, Suzaki Y, Fujikubo M (2015) Scaled tests for the post-ultimate strength collapse behaviour of a ship’s hull girder under whipping loads. Ships Offshore Struct 10:31-38
IMO (2010) Adoption of the international goal-based ship construction standards for bulk carriers and oil tankers. Maritime Safety Commit 287(87)
Islam MR, Sumi Y (2011) Geometrical effects of pitting corrosion on strength and deformability of steel rectangular plates subjected to uniaxial tension and pure bending, Journal of the Society of Naval Architects of Japan, 9-17
Ivanov L, Spencer J, Wang G (2003) Probabilistic evaluation of hull structure renewals for aging ships. ABS Technical Papers 2003:329-342
Jelovica J, Romanoff J, Ehlers S, Aromaa J (2013) Ultimate strength of corroded web-core sandwich beams. Mar Struct 31:1-14
Jelovica J, Romanoff J, Remes H (2014) Influence of general corrosion on buckling strength of laser-welded web-core sandwich plates. J Constr Steel Res 101:342-350
Jia H, Moan T (2008) Reliability analysis of oil tankers with collision damage. In:Proceedings of the 27th International Conference on Offshore Mechanics and Arctic Engineering paper OMAE2008-57102, 55-63
Jia Z, Yang Y, He Z, Ma H, Ji F (2019) Mechanical test study on corroded marine high-performance steel under cyclic loading. Appl Ocean Res 93(101942):101942
Jiang X, Guedes Soares C (2008) Assessment of the uncertainty in corrosion models for ship steels, In:Proceedings of 27th international conference on offshore mechanics and Arctic engineering (OMAE 2008), Estoril, Portugal, ASME, paper OMAE2008-58052
Jiang X, Guedes Soares C (2011) Ultimate capacity behaviour of pitted mild steel plates under biaxial compression. In:Proceedings of the 30th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2011), Rotterdam, the Netherlands, ASME, paper OMAE2011-49980
Jiang X, Guedes Soares C (2012) Ultimate capacity of rectangular plates with partial depth pits under uniaxial loads. Mar Struct 26(1):27-41
Joonmo C, Nam JM, Ha TB (2012) Assessment of residual ultimate strength of an asymmetrically damaged tanker considering rotational and translational shifts of neutral axis plane. Mar Struct 25:71-84
Khedmati MR, Edalat P, Javidruzi M (2009) Sensitivity analysis of the elastic buckling of cracked plate elements under axial compression. Thin-Walled Struct 47:522-536
Khedmati MR, Hadj Z, Nouri ME (2015) Analytical simulation of nonlinear elastic-plastic average stress-average strain relationships for un-corroded/both-sides randomly corroded steel plates under uniaxial compression. Thin-Walled Struct 86:132-141
Khedmati MR, Roshanali MM, Nouri ZHME (2011) Strength of steel plates with both-sides randomly distributed with corrosion wastage under uniaxial compression. Thin-Walled Structure 49:325-342
Kim DK, Kim HB, Mohd MH, Paik JK (2013) Comparison of residual strength-grounding damage index diagrams for tankers produced by the ALPS/HULL ISFEM and design formula method. Int J Naval Archit Ocean Eng 5:47-61
Kim DK, Liew MS, Youssef SAM, Mohd MH, Kim HB, Paik JK (2014) Time-dependent ultimate strength performance of corroded FPSOs. Arab J Sci Eng 39(11):7673-7690
Kim U-N, Choe I-H, Paik JK (2009) Buckling and ultimate strength of perforated plate panels subject to axial compression:experimental and numerical investigations with design formulations. Ships Offshore Struct 4:337-361
Komoriyama Y, Tanaka Y, Ando T, Hashizume Y, Tatsumi A, Fujikubo M (2018) Effects of cumulative buckling deformation formed by cyclic loading on ultimate strength of stiffened panel. In:Proceedings of the 37th International Conference on Ocean, Offshore and Arctic Engineering, paper OMAE2018-77855
Lampe J, Hamann R (2018) Probabilistic model for corrosion degradation of tanker and bulk carrier. Mar Struct 61:309-325
Lee T-K, Rim CW, Han D-S, Kim BH, Lee J-M, Kim KS (2008) A study of ultimate collapse strength in sagging of ship structures with side collision damage, International Offshore and Polar Engineering Conference, Vancouver, BC, Canada, 503-508
Li CF, Fu P, Ren HL, Xu WJ, Guedes Soares C (2018) Ultimate bearing capacity assessment of hull girder with asymmetric cross-section. J Offshore Mech Arct Eng 140
Liu B, Garbatov Y, Zhu L, Guedes Soares C (2018a) Numerical assessment of the structural crashworthiness of corroded ship hulls in stranding. Ocean Eng 170:276-285
Liu B, Pedersen P, Zhu L, Zhang S (2018b) Review of experiments and calculation procedures for ship collision and grounding damage. Mar Struct 59:105-121
Luis RM, Guedes Soares C, Nikolov PI (2008) Collapse strength of longitudinal plate assemblies with dimple imperfections. Ships Offshore Struct 3:359-370
Luis RM, Teixeira AP, Guedes Soares C (2009) Longitudinal strength reliability of a tanker hull accidentally grounded. Struct Saf 31:224-233
Ma H, Yang Y, He Z, Zhang Y, Ji F (2019) Experimental study on mechanical properties of steel under extreme cyclic loading considering pitting damage. Ocean Eng 186(106091):106091
Makouei SH, Teixeira AP, Guedes Soares C (2015) A study on the progressive collapse behaviour of a damaged hull girder. In:Guedes Soares, C, Santos T.A. (Eds.). Maritime Technology and Engineering London, Taylor & Francis Group, 405-416
Mansour AE, El-Kilani HS, Abdel-Malek IS (2003) Residual strength of ships after grounding. Alexandria Eng J 42(5):517-525
Margaritis Y, Toulios M (2012) The ultimate and collapse response of cracked stiffened plates subjected to uniaxial compression. Thin-Walled Struct 50:157-173
Mateus AF, Witz JA (1998) On the post-buckling of corroded steel plates used in marine structures. Transac Royal Institut Naval Archit 140:165-183
Melchers RE (2003a) Probabilistic models for corrosion in structural reliability assessment-part 1:empirical models. J Offshore Mech Arct Eng 125(4):264-271
Melchers RE (2003b) Probabilistic models for corrosion in structural reliability assessment-part 2:models based on mechanics. J Offshore Mech Arct Eng 125(4):272-280
Mohammadrahimi A, Sayebani M (2019) Using the Bayesian updating approach to develop time-dependent corrosion wastage model for deck panel of bulk carriers. Mar Struct 64:92-109
Nakai T, Matsushita H, Yamamoto N (2006) Effect of pitting corrosion on the ultimate strength of steel plates subjected to in-plane compression and bending. J Mar Sci Technol 11(1):52-64
Nakai T, Matsushita H, Yamamoto N (2007) Visual assessment of corroded condition of plates with pitting corrosion takin into account residual strength-in the case of webs of hold frames of bulk carriers. In:Proceedings of the 26th International Conference on Offshore Mechanics and Arctic Engineering, OMAE2007-29159, 1-11
Nikolov PI (2007) Collapse strength of damaged plating between stiffeners, in:Guedes Soares, C. Kolev, P (Eds) Maritime Industry, Ocean Engineering and Coastal Resources. Taylor & Francis Group, London, pp 237-244
Nikolov PI (2008) Collapse strength of damaged plating. In:Proceedings of the 27th International Conference on Offshore Mechanics and Arctic Engineering, Estoril, Portugal, ASME, OMAE2008-57119, 79-88
Ok D, Pu Y, Incecik A (2007) Artificial neural networks and their application to assessment of ultimate strength of plates with pitting corrosion. Ocean Eng 34:2222-2230
Paik JK (2008) Residual ultimate strength of steel plates with longitudinal cracks under axial compression-experiments. Ocean Eng 35(17-18):1775-1783
Paik J, Brennan F, Carlsen C, Daley C, Garbatov Y, Ivanov L, Rizzo C, Simonsen B, Yamamoto N. Zhuang H (2006a) Committee V.6 Condition assessment of aged ships, in:Proceedings of the 16th International Ship and Offshore Structures Congress (ISSC2006), P. Frieze and R. Shenoi, Southampton, U.K., University of Southampton 2:255-306
Paik JK, Kumar YV (2006b) Ultimate strength of stiffened panels with cracking damage under axial compression or tension. J Ship Res 50(3):231-238
Paik JK, Kim S, Lee S, Park Y (1998) A probabilistic corrosion rate estimation model for longitudinal strength members of bulk carriers. J Ship Ocean Technol 2:58-70
Paik JK, Kumar YV, Lee JM (2005) Ultimate strength of cracked elements under axial compression or tension. Thin-Walled Struct 43:237-272
Paik JK, Lee JM, Hwang JS, Park Y l (2003a) A time-dependent corrosion wastage model for the structures of single and double hull tankers and FSOs and FPSOs. Mar Technol 40(3):201-217
Paik JK, Lee JM, Ko MJ (2003b) Ultimate compressive strength of plate element with pit corrosion wastage. Jf Eng Maritime Environ 217:185-200
Paik JK, Lee JM, Ko MJ (2004) Ultimate shear strength of plate element with pit corrosion wastage. Thin-Walled Struct 42:1161-1176
Paik JK, Lee JM, Lee DH (2003c) Ultimate strength of dented steel plates under axial compressive loads. Int J Mech Sci 45:433-448
Paik JK, Lee JM, Park Y Ⅱ, Hwang JS, Kim CW (2003d) Time-variant ultimate longitudinal strength of corroded bulk carriers. Mar Struct 16(8):567-600
Paik JK, Mansour AE (1995) A simple formulation for predicting the ultimate strength of ships. J Mar Sci Technol 1:52-62
Paik JK, Thayamballi AK (2003) An experimental investigation on the dynamic ultimate compressive strength of ship plating. International Journal of Impact Engineering 28(7):803-811
Panayotova M, Garbatov Y, Guedes Soares C (2004a) Factors influencing atmospheric corrosion and corrosion in closed spaces of marine steel structures. In:Proceedings of the International Conference on Marine Science and Technology (Black Seá04), Varna, Bulgaria, Union of Scientists of Varna, 286-292
Panayotova M, Garbatov Y, Guedes Soares C (2004b) Factors influencing corrosion of steel structural elements immersed in seawater. In:Proceedings of the International Conference on Marine Science and Technology (Black Seá04), Varna, Bulgaria, Union of Scientists of Varna, 280-286
Panayotova M, Garbatov Y, Guedes Soares C (2008a) Corrosion monitoring of ship hulls, in:Guedes Soares, C. Kolev, P (Eds) Maritime Industry, Ocean Engineering and Coastal Resources. Taylor & Francis Group, London, pp 263-269
Panayotova M, Garbatov Y, Guedes Soares C (2008b) Corrosion of steels in marine environment, monitoring and standards, in:Guedes Soares, C. Safety and Reliability of Industrial Products, Systems and Structures, Taylor & Francis Group, London, pp 369-412
Parunov J, Gledic I, Garbatov Y, Guedes Soares C (2013) Fatigue assessment of corroded deck longitudinals of tankers. Int J Maritime Eng 155(A1):9-21
Parunov J, Rudan S, Gledic I, Primorac BB (2018) Finite element study of residual ultimate strength of a double hull oil tanker with simplified collision damage and subjected to biaxial bending. Ships Offshore Struct 13:525-536
Pei Z, Iijima K, Fujikubo M, Tanaka S, Okazawa S, Yao T (2015) Simulation on progressive collapse behaviour of whole ship model under extreme waves using idealized structural unit method. Mar Struct 40:104-133
Piscopo V, Scamardella A (2018) Towards a unified formulation for the ultimate strength assessment of uncorroded and pitted platings under uniaxial compression. Ocean Eng 1691:70-86
Qin S, Cui W (2002) Effect of corrosion models on the time-dependent reliability of steel plated elements. Mar Struct 15-34
Qin G, Xu S, Yao D, Zhang Z (2016) Study on the degradation of mechanical properties of corroded steel plates based on surface topography. J Constr Steel Res 125:205-217
Rahbar-Ranji A (2012) Ultimate strength of corroded steel plates with irregular surfaces under in-plane compression. Ocean Eng 54:261-269
Rahbar-Ranji A (2015) Elastic buckling analysis of corroded stiffened plates with irregular surfaces. Sadhana 40(1):199-213
Raviprakash AV, Prabu B, Alagumurthi N (2012) Residual ultimate compressive strength of dented square plates. Thin-Walled Struct 58:32-39
Riks E, Rankin CC, Bargon FA (1992) Buckling behaviour of a central crack in a plate under tension. Eng Fract Mech 43:529-548
Rutherford SE, Caldwell JB (1990) Ultimate longitudinal strength of ships:a case study. Trans SNAME 89:441-471
Saad-Eldeen S, Garbatov Y, Guedes Soares C (2010) Experimental assessment of the ultimate strength of a box girder subjected to four-point bending moment. In:Proceedings of the 11th International Symposium on Practical Design of Ships and other Floating Structures (PRADS2010), Rio de Janeiro, Brazil, Aped, 1134-1143
Saad-Eldeen S, Garbatov Y, Guedes Soares C (2011a) Corrosion-dependent ultimate strength assessment of aged box girders based on experimental results. J Ship Res 55(4):289-300
Saad-Eldeen S, Garbatov Y, Guedes Soares C (2011b) Experimental assessment of the ultimate strength of a box girder subjected to severe corrosion. Mar Struct 24(4):338-357
Saad-Eldeen S, Garbatov Y, Guedes Soares C (2012) Analysis of plate deflections during ultimate strength experiments of corroded box girders. Thin-Walled Struct 54:164-176
Saad-Eldeen S, Garbatov Y, Guedes Soares C (2013a) Effect of corrosion severity on the ultimate strength of a steel box girder. Eng Struct 49:560-571
Saad-Eldeen S, Garbatov Y, Guedes Soares C (2013b) Ultimate strength assessment of corroded box girders. Ocean Eng 58:35-47
Saad-Eldeen S, Garbatov Y, Guedes Soares C (2014) Strength assessment of a severely corroded box girder subjected to bending moment. J Constr Steel Res 92:90-102
Saad-Eldeen S, Garbatov Y, Guedes Soares C (2015a) Compressive strength assessment of rectangular steel plates accounting for the presence of a local dent or an opening, in:Guedes Soares C. and Santos, TA (eds) Maritime Technology and Engineering, London, UK, Taylor & Francis Group, 543-551
Saad-Eldeen S, Garbatov Y, Guedes Soares C (2015b) Strength assessment of steel plates subjected to compressive load and dent deformation. Struct Infrastruct Eng 12(8):995-1011
Saad-Eldeen S, Garbatov Y, Guedes Soares C (2016) Experimental investigation on the residual strength of thin steel plates with a central elliptic opening and locked cracks. Ocean Eng 115:19-29
Saad-Eldeen S, Garbatov Y, Guedes Soares C (2019) Buckling collapse tests of deteriorated steel plates with multiple circular openings. Ocean Eng 172:523-530
Saad-Eldeen S, Garbatov Y, Guedes Soares C (2013c) Effect of corrosion degradation on ultimate strength of steel box girders, corrosion engineering. Sci Technol 47(4):272-283
Saad-Eldeen S, Guedes Soares C (2009) Effect of pitting corrosion on the collapse strength of rectangular plates under axial compression. in:Guedes Soares, C & Das P. K., (Eds.). Analysis and Design of Marine Structures. London, U.K. Taylor & Francis Group; 231-236
Sadovsky Z, Drdácky M (2001) Buckling of plate strip subjected to localised corrosion-a stochastic model. Thin-Walled Struct 39(3):247-259
Shaw D, Huang YH (1990) Buckling behaviour of a central cracked thin plate under tension. Eng Fract Mech 35(6):1019-1027
Sheng J, Xia J (2017) Effect of simulated pitting corrosion on the tensile properties of steel. Constr Build Mater 131:90-100
Shi G-J, Wang DY (2012) Residual ultimate strength of cracked box girders under torsional loading. Ocean Eng 43:102-112
Shi W (1993) In-service assessment of ship structures:effects of general corrosion on ultimate strength. Transac Royal Institut Naval Archit 135:77-91
Shi G, Wang DY (2012) Residual ultimate strength of open box girders with cracked damage. Ocean Eng 43:90-101
Shi XH, Zhang J, Guedes Soares C (2019) Numerical assessment of experiments on the residual ultimate strength of stiffened plates with a crack. Ocean Eng 171:443-457
Shi XH, Jiang X, Zhang J, Guedes Soares C (2016) Residual ultimate strength of stiffened panels with pitting corrosion under compression. In:Guedes Soares, C. & Santos T. A., (Eds.). Maritime Technology and Engineering 3. London, UK:Taylor & Francis Group; 547-556
Shi XH, Zhang J, Guedes Soares C (2017) Experimental study on collapse of cracked stiffened plate with initial imperfections under compression. Thin-Walled Struct 114:39-51
Shi XH, Zhang J, Guedes Soares C (2018) Numerical assessment of experiments on the ultimate strength of stiffened panels with pitting corrosion under compression. Thin-Walled Struct 133:52-70
Silva JE, Garbatov Y, Guedes Soares C (2013) Ultimate strength assessment of rectangular steel plates subjected to a random localised corrosion degradation. Eng Struct 52:295-305
Silva JE, Garbatov Y, Guedes Soares C (2014) Reliability assessment of a steel plate subjected to distributed and localized corrosion wastage. Eng Struct 59:13-20
Slater PA, Pandey MD, Sherbourne AN (1999) Finite element analysis of buckling of corroded ship plates. Can J Civ Eng 27:463-474
Smith CS, Dow RS (1981) Residual strength of damaged steel ships and offshore structure. J Constr Steel Res 1(4):2-15
Southwell C, Bultman J, Hummer JRC (1979) Estimating of service life of steel in seawater. In:Seawater Corrosion Handbook, 374-387
Sultana S, Wang Y, Sobey AJ, Wharton JA, Shenoi RA (2015) Influence of corrosion on the ultimate compressive strength of steel plates and stiffened panels. Thin-Walled Struct 96:95-104
Sumi Y (2008) Strength and deformability of corroded steel plates estimated by replicated specimens. J Ship Product Desig 24(3):161-167
Sumi Y, Yamamura N, Yamamuro Y (2006) On the strength and deformability of corroded steel. J Japan Soc Naval Archit Ocean Eng 4:239-245
Sun HH, Guedes Soares C (2006) Reliability-based inspection for corroded ship-type FPSO hulls. J Ship Res 50(2):171-180
Teixeira AP, Guedes Soares C (2008) Ultimate strength of plates with random fields of corrosion. Struct Infrastruct Eng 4(5):363-370
Tekgoz M, Garbatov Y (2020a) Strength assessment of rectangular plates subjected to extreme cyclic load reversals. J Marine Sci Eng 8(2):65, 1-65,21
Tekgoz M, Garbatov Y (2020b) Strength assessment of rectangular plates subjected to extreme cyclic load reversals. J Marine Sci Eng 8(2):65
Tekgoz M, Garbatov Y, Guedes Soares C (2015a) Strength analysis of ship shaped structures subjected to asymmetrical bending moment, in:Guedes Soares C. and Shenoi A. (eds) Analysis and Design of Marine Structures, Taylor & Francis Group, London, 415-423
Tekgoz M, Garbatov Y, Guedes Soares C (2015b) Strength assessment of a single hull damaged tanker ship subjected to asymmetrical bending loading, in:Guedes Soares, C.. Dejhalla R and Pavletic D. (eds) Towards Green Marine Technology and Transport, London, Taylor & Francis Group, 327-334
Tekgoz M, Garbatov Y, Guedes Soares C (2015c) Ultimate strength assessment of a container ship accounting for the effect of neutral axis movement, in:Guedes Soares C, Santos TA. (eds) Marine Technology and Engineering, London, Taylor & Francis Group, 417-425
Tekgoz M, Garbatov Y, Guedes Soares C (2018a) Residual strength assessment of a grounded container ship subjected to asymmetrical bending loads, in:Guedes Soares C, Santos TA (eds) Progress in Maritime Technology and Engineering, London, Taylor & Francis Group, 337-344
Tekgoz M, Garbatov Y, Guedes Soares C (2018b) Strength assessment of an intact and damaged container ship subjected to asymmetrical bending loadings. Mar Struct 58:172-198
Tekgoz M, Garbatov Y, Guedes Soares C (2019) Ultimate strength assessment of a square plate subjected to uniaxial dynamic load, in:Guedes Soares, C. (ed) Developments in the Collision and Grounding of Ships and Offshore Structures. Taylor and Francis Group, London, 189-201
TSCF (1992) Condition evaluation and maintenance of tanker structures. Wetherby & Co, London
Vafai A, Javidruzi M, Estekanchi HE (2002) Parametric instability of edge cracked plates. Thin-Walled Struct 40:29-44
Wang F, Cui WC, Paik JK (2009a) Residual ultimate strength of structural members with multiple crack damage. Thin-Walled Struct 47(12):1439-1446
Wang G, Boon B, Brennan F, Garbatov Y, Ji C, Parunov J, Rahman T, Rizzo C, Rouhan A, Shin C, Yamamoto N (2009) Committee V.6 Condition assessment of ageing ships and offshore structures, In:(eds) Proceedings of the 17th International Ship and Offshore Structures Congress (ISSC2009), C. Jang, J. Hong J, Seul, South Korea, University of Seoul, 3
Wang F, Paik JK, Kim BJ, Weicheng C, Tasawar H, Ahmad B (2015a) Ultimate shear strength of intact and cracked stiffened panels. Thin-Walled Struct 88:48-57
Wang G, Lee A, Ivanov L, Lynch J, Serratella C, Basu R (2008) A statistical investigation of time-variant hull girder strength of aging ships and coating life. Mar Struct 21:240-256
Wang G, Spencer J, Elsayed T (2003) Estimation of corrosion rates of structural members in oil tankers. In:Proceeding of 22nd International Conference on Offshore Mechanics and Arctic Engineering, paper OMAE2003-37361, ASME
Wang R, Shenoi R, Sobey A (2018) Ultimate strength assessment of plated steel structures with random pitting corrosion damage. J Constr Steel Res 143:331-342
Wang Y, Wharton JA, Shenoi RA (2015b) Ultimate strength assessment of steel stiffened plate structures with grooving corrosion damage. Eng Struct 941:29-42
Wang Y, Wharton Y, Shenoi R (2014) Ultimate strength analysis of aged steel-plated structures exposed to marine corrosion damage:a review. Corros Sci 86:42-60
Wirsching PH, Ferensic J, Thayamballi A (1998) Reliability with respect to ultimate strength of a corroding ship Hull. Mar Struct 10(7):501-518
Witkowska M, Guedes Soares C (2015) Ultimate strength of locally damaged panels. Thin Walled Structures 97:225-240
Woloszyk K, Garbatov Y (2019) Structural reliability assessment of corroded tanker ship based on experimentally estimated ultimate strength. Polish Maritime Res 26(2):47-54
Woloszyk K, Garbatov Y (2020) Random field modelling of mechanical behaviour of corroded thin steel plate specimens. Eng Struct 212:110544
Woloszyk K, Kahsin M, Garbatov Y (2018) Numerical assessment of ultimate strength of severe corroded stiffened plates. Eng Struct 168:346-354
Xu MC, Garbatov Y, Guedes Soares C (2014) Residual ultimate strength assessment of stiffened panels with locked cracks. Thin-Walled Struct 85:398-410
Xu MC, Guedes Soares C (2013) Assessment of residual ultimate strength for wide dented stiffened panels subjected to compressive loads. Eng Struct 49:316-328
Xu MC, Guedes Soares C (2015) Effect of a central dent on the ultimate strength of narrow stiffened panels under axial compression. Int J Mech Sci 100:68-79
Xu S-H, Qiu B (2013) Experimental study on fatigue behaviour of corroded steel. Mater Sci Eng A584:163-169
Xu S, Wang H, Li A, Wang Y, Su L (2016) Effects of corrosion on surface characterisation and mechanical properties of butt-welded joints. J Constr Steel Res 126:50-62
Yamada Y (2014) Numerical study on the residual ultimate strength of hull girder of a bulk carrier after ship-ship collision. In:Proceedings of the 33rd International Conference on Offshore Mechanics and Arctic Engineering, paper OMAE2014-23811
Yamada Y, Kameya K (2018) A study on the dynamic ultimate strength of global hull girder of container ships subjected to hogging moment. In:Proceedings of the 37th International Conference on Ocean, Offshore and Arctic engineering, paper OMAE2018-77402
Yamada Y, Takami T (2015) Model test on the ultimate longitudinal strength of a damaged box girder, in Guedes Soares, C. & Shenoi R. A., (Eds.). Analysis and Design of Marine Structures. London, Taylor & Francis Group, 435-441
Yamamoto N, Ikegami K (1998) A study on the degradation of coating and corrosion of ship’s hull based on the probabilistic approach, Journal of Offshore Mechanics and Arctic Engineering ASME 120(3):121-128
Yamamoto N, Yao T (2001) Hull girder strength of a tanker under longitudinal bending considering strength diminution due to corrosion, structural safety and reliability. In:Proceedings of the 8th international conference (ICOSSAR2001)
Yang B, Guedes Soares C, Wang DY (2019) Dynamic ultimate compressive strength of simply supported rectangular plates under impact loading. Mar Struct 66:258-271
Yang B, Guedes Soares C, Wang DY (2018a) An empirical formulation for predicting the dynamic ultimate strength of rectangular plates under in-plane compressive loading. Int J Mech Sci 141:213-222
Yang B, Wu JM, Guedes Soares C, Wang DY (2018b) Dynamic ultimate strength of outer bottom stiffened plates under in-plane compression and lateral pressure. Ocean Engineering. 157:44-53
Yang H, Zhang Q, Tu S, Wang Y, Huang Y (2016) A study on time-variant corrosion model for immersed steel plate elements considering the effect of mechanical stress. Ocean Eng 1251:134-146
Yang Y, Huang R, He Z (2020) Experimental study of the uniaxial compressive behaviour of DH36 steel plates with mechanically induced pits. Ocean Eng 200(107058):107058
Yao T, Fujikubo M, Lijima K, Pei Z (2009) Total system including capacity calculation applying ISUM/FEM and loads calculation for progressive collapse analysis of ship’s hull girder in longitudinal bending. International Society of Offshore and Polar Engineers
Yao T, Nikolov PI (1990) Buckling/plastic collapse of plates under cyclic loading. J Soc Naval Archit Japan 1990(168):449-462
Yao Y, Yang Y, He Z, Wang Y (2018) Experimental study on generalized constitutive model of hull structural plate with multi-parameter pitting corrosion. Ocean Eng 170:407-415
Zayed A, Garbatov Y, Guedes Soares C (2007a) Corrosion modelling of single-hull crude oil tanker subjected to multiple deterioration environments. In:Proceedings of the 26th International Conference on Offshore Mechanics and Arctic Engineering, San Diego, USA, ASME, New York, paper OMAE2007-29741
Zayed A, Garbatov Y, Guedes Soares C (2007b) Factors affecting the non-destructive inspection of marine structures, in:Guedes Soares C., Das, P. K. (eds) Advancements in Marine Structures. advancements in marine structures. Taylor & Francis Group, London, pp 565-576
Zayed A, Garbatov Y, Guedes Soares C (2013) Reliability of ship hulls subjected to corrosion and maintenance. Struct Saf 43:1-11
Zayed A, Garbatov Y, Guedes Soares C (2018) Corrosion degradation of ship hull steel plates accounting for local environmental conditions. Ocean Eng 163:299-306
Zhang Y, Huang Y, Meng F (2017a) Ultimate strength of hull structural stiffened plate with pitting corrosion damage under uniaxial compression. Mar Struct 56:117-136
Zhang Y, Huang Y, Wei Y (2017b) Ultimate strength experiment of hull structural plate with pitting corrosion damage under uniaxial compression. Ocean Eng 130:103-114
Zhang Y, Huang Y, Zhang Q, Liu G (2016) Ultimate strength of hull structural plate with pitting corrosion danification under combined loading. Ocean Eng 116:273-285
Zhao Z, Zhang H, Xian L, Liu H (2020) Tensile strength of Q345 steel with random pitting corrosion based on numerical analysis. Thin-Walled Struct 148(106579):106579

Memo

Memo:
Received date:2020-07-02;Accepted date:2020-09-25。
Corresponding author:Y. Garbatov,yordan.garbatov@tecnico.ulisboa.pt
Last Update: 2021-04-07