|Table of Contents|

Citation:
　Amir H. Nikseresht,Harry B. Bingham.A Numerical Investigation of Gap and Shape Effects on a 2D Plunger-Type Wave Maker[J].Journal of Marine Science and Application,2020,(1):101-115.[doi:10.1007/s11804-020-00135-5]
Click and Copy

A Numerical Investigation of Gap and Shape Effects on a 2D Plunger-Type Wave Maker

Info

Title:
A Numerical Investigation of Gap and Shape Effects on a 2D Plunger-Type Wave Maker
Author(s):
Amir H. Nikseresht1; 2;  Harry B. Bingham1
Affilations:
Author(s):
Amir H. Nikseresht1; 2;  Harry B. Bingham1
1 Department of Mechanical Engineering, Technical University of Denmark, DK-2800 Kgs Lyngby, Denmark;
2 Department of Mechanical Engineering, Shiraz University of Technology, Shiraz 71555-13876, Iran
Keywords:
Wave maker; Plunger-type; Berkeley wedge; Hyperbolic sine profile; Gap; Dynamic mesh; Volume of fluid
分类号:
-
DOI:
10.1007/s11804-020-00135-5
Abstract:
The installation of plunger-type wave makers in experimental tanks will generally include a gap between the back of the wedge and the wall of the tank. In this study, we analyze the influence of this gap on the wave making performance of the plunger using two-dimensional (2D) CFD calculations for a range of nearly linear wave conditions and compare the results with both experimental measurements and linear potential flow theory. Three wedge-shaped profiles, all with the same submerged volume, are considered. Moreover, the generated waves are compared with the predictions of linear potential flow theory. The calculations are made using the commercial ANSYS FLUENT finite-volume code with dynamic meshes to solve the Navier-Stokes equations and the volume of fluid scheme to capture the air-water interface. Furthermore, the linear potential flow solution of Wu (J Hydraul Res 26:481-493, 1988) is extended to consider an arbitrary profile and serve as a reference solution. The amplitude ratios of the generated waves predicted by the CFD calculations compare well with the predictions of linear potential flow theory for a simple wedge, indicating that viscous effects do not influence this ratio for small-amplitude motions in 2D. By contrast, significant higher harmonic components are produced by larger amplitude motions. Also, the simple wedge is found to produce the smallest spurious higher harmonic content in the far-field wave.

References:

Arcari P (2015) Analysis and optimization of a wedge-type wave generator for the DTU wave. Master thesis, DTU Wind Energy, Lyngby
Azadian-Kharanjani Zohre, Nikseresht Amir H, Bingham Harry B (2018) A numerical investigation of wedge angle effects on a plunger type wave maker with a constant submerged volume. OMAE 2018-77380, V002T08A043, Madrid. Doi:https://doi.org/10.1115/OMAE2018-77380
Cengel YA, Cimbala JM (2006) Fluid mechanics:fundamentals and applications. MacGraw-Hill Companies, New York, pp 513-514
Dao MH, Chew LW, Zhang Y (2018) Modelling physical wave tank with flap paddle and porous beach in OpenFOAM. Ocean Eng 154:204-2015. https://doi.org/10.1016/j.oceaneng.2018.02.024
Elangovan M, Lal A (2008) Design and simulation of wave maker for marine industry by CFD. ANSYS India Conference (ANSYS 2008), Bangalore
Gadelho JFM, Lavrov A, Guedes Soares C (2015) CFD modelling of the waves generated by a wedge-shaped wave maker. Maritime Technology and Engineering, 993-1000. Doi:https://doi.org/10.1201/b17494-133
Hicks JBH (2017) Development and testing of optimized control signals for a plunger-type wave generator. Master thesis, DTU Mechanical Engineering, Lyngby
Higuera P, Losada IJ, Lara JL (2015) Three-dimensional numerical wave generation with moving boundaries. Coast Eng 101:35-47. https://doi.org/10.1016/j.coastaleng.2015.04.003
Kashiwagi M (1996) Full-nonlinear simulations of hydrodynamic forces on a heaving two-dimensional body. Journal of The Society of Naval Architects of Japan 180:373-381. https://doi.org/10.2534/jjasnaoe1968.1996.180_373
Keaney I, Costello R, Ringwood JV (2014) Evanescent wave reduction using a segmented wavemaker in a two dimensional wave tank.OMAE 2014-24441, V08BT06A052. Doi:https://doi.org/10.1115/OMAE2014-24441
Koo WC, Kim MH (2006) Numerical simulation of nonlinear wave and force generated by a wedge-shape wave maker. Ocean Eng 33:983-1006. https://doi.org/10.1016/j.oceaneng.2005.09.002
Lal A, Elangovan M (2008) CFD simulation and validation of plunger type wave-maker. J Math Comput Sci 2(10):708-714
Madhi F, Sinclair ME, Yeung RW (2014) The "Berkeley wedge":an asymmetrical energy-capturing floating breakwater of high performance. Marine Systems & Ocean Technology 9:5-16. https://doi.org/10.1007/BF03449282
Martínez-Ferrer PJ, Qian L, Ma Z, Causon DM, Mingham CG (2018) Improved numerical wave generation for modelling ocean and coastal engineering problems. Ocean Eng 152:257-272. https://doi.org/10.1016/j.oceaneng.2018.01.052
Mikkola T (2006) Time accurate simulation of a plunger type wave maker using unstructured finite volume solver with surface tracking. 26th Symposium on Naval Hydrodynamics, Rome
Mikkola T (2007) Simulation of plunger-type wave makers. J Struct Mech 40(4):19-39
Nikseresht AH, Alishahi MM, Emdad H (2005) Volume of fluid interface tracking with Lagrangian propagation for incompressible free surface flows. Scientia Iranica 12(2):131-140
Nikseresht AH, Alishahi MM, Emdad H (2008) Complete flow field computation around an ACV (air-cushion vehicle) using 3D VOF with Lagrangian propagation in computational domain. Comput Struct 86:627-641. https://doi.org/10.1016/j.compstruc.2007.08.006
Nikseresht AH, Alishahi MM, Emdad H (2009) Generalized curvilinear coordinate interface tracking in the computational domain. Scientia Iranica 17:64-74
Prasada DD, Ahmeda MR, Leeb YH, Sharma RN (2017) Validation of a piston type wave-maker using numerical wave tank. Ocean Eng 131:57-67. https://doi.org/10.1016/j.oceaneng.2016.12.031
Wang S (1974) Plunger-type wavemakers:theory and experiment. J Hydraul Res 12(3):357-388. https://doi.org/10.1080/00221687409499732
Wu YC (1988) Plunger-type wave-maker theory. J Hydraul Res 26(4):481-493. https://doi.org/10.1080/00221688809499206
Wu YC (1991) Waves generated by a plunger-type wavemaker. J Hydraul Res 29(6):851-860. https://doi.org/10.1080/00221689109498963
Yeung RW, Jiang Y (2014) Shape effects on viscous damping and motion of heaving cylinders. J Offshore Mech Arct Eng 136:041801-1-041801-9. https://doi.org/10.1115/1.4027650
Yim SC, Yuk D, Panizzo A, Di Risio M, Liu PLF (2008) Numerical simulations of wave generation by a vertical plunger using RANS and SPH models. J Waterw Port Coast Ocean Eng 134(3):143-159.https://doi.org/10.1061/(asce)0733-950x(2008)134:3(143)

Memo

Memo:
Received date:2019-06-04;Accepted date:2019-11-15。
Corresponding author:Amir H. Nikseresht,nikser@sutech.ac.ir
Last Update: 2020-07-24