|Table of Contents|

Citation:
　Hyun Ho Lee,Jeom Kee Paik.Ultimate Compressive Strength Computational Modeling for Stiffened Plate Panels with Nonuniform Thickness[J].Journal of Marine Science and Application,2020,(4):658-673.[doi:10.1007/s11804-020-00180-0]
Click and Copy

Ultimate Compressive Strength Computational Modeling for Stiffened Plate Panels with Nonuniform Thickness

Info

Title:
Ultimate Compressive Strength Computational Modeling for Stiffened Plate Panels with Nonuniform Thickness
Author(s):
Hyun Ho Lee1;  Jeom Kee Paik1; 2; 3
Affilations:
Author(s):
Hyun Ho Lee1;  Jeom Kee Paik1; 2; 3
1 Department of Naval Architecture and Ocean Engineering, Pusan National University, Busan, South Korea;
2 The Korea Ship and Offshore Research Institute(Lloyd’s Register Foundation Research Centre of Excellence), Pusan National University, Busan, South Korea;
3 Department of Mechanical Engineering, University College London, London, UK
Keywords:
Ultimate compressive strength; Steel-stiffened plate structures; Nonuniform plate thickness; ANSYS finite element method; ALPS/SPINE incremental Galerkin method; ALPS/ULSAP analytical method
分类号:
-
DOI:
10.1007/s11804-020-00180-0
Abstract:
The aim of this paper is to develop computational models for the ultimate compressive strength analysis of stiffened plate panels with nonuniform thickness. Modeling welding-induced initial deformations and residual stresses was presented with the measured data. Three methods, i.e., ANSYS finite element method, ALPS/SPINE incremental Galerkin method, and ALPS/ULSAP analytical method, were employed together with existing test database obtained from a full-scale collapse testing of steel-stiffened plate structures. Sensitivity study was conducted with varying the difference in plate thickness to define a representative (equivalent) thickness for plate panels with nonuniform thickness. Guidelines are provided for structural modeling to compute the ultimate compressive strength of plate panels with variable thickness.

References:

Abdussamie N, Ojeda R, Daboos M (2018) ANFIS method for ultimate strength prediction of unstiffened plates with pitting corrosion. Ships and Offshore Structures 13(5):540-550
ALPS/SPINE (2020) Elastic-plastic large deflection analysis of plates and stiffened pan els under combined biaxial compression/tension, biaxial in-plane bending, edge shear and lateral pressure loads. MAESTRO Marine LLC, Greenboro . Accessed on 3 Jan 2020
ALPS/ULSAP (2020) Ultimate strength analysis of plates and stiffened panels under combined biaxial compression/tension, edge shear and lateral loads. MAESTRO Marine LLC, Greenboro Accessed on 3 Jan 2020
ANSYS (2019) User’s manual (version 10.0). ANSYS Inc., Canonsburg
ASTM (2011) ASTM E8/E8M-09 Standard test methods for tension testing of metallic materials. ASTM International, West Conshocken, PA
Benson S, Downes J, Dow RS (2011) Ultimate strength characteristics of aluminium plates for high-speed vessels. Ships and Offshore Structures 6(1-2):67-80
de Faria AR, de Almeida SFM (2003) Buckling optimization of plates with variable thickness subjected to nonuniform uncertain loads. Int J Solids Struct 40:3955-3966
DNVGL (2017) Rules for classification-ships, part 2 materials and welding, chapter 4 fabrication and testing. Høvik, Norway
Fletcher CAJ (1984) Computational Galerkin method. Springer-Verlag, New York
Gannon L, Liu Y, Pegg N, Smith MJ (2013) Effect of three-dimensional welding-induced residual stress and distortion fields on strength and behaviour of flat-bar stiffened panels. Ships and Offshore Structures 8(5):565-578
Gannon L, Liu Y, Pegg N, Smith MJ (2016) Nonlinear collapse analysis of stiffened plates considering welding-induced residual stress and distorion. Ships and Offshore Structures 11(3):228-244
Iijima K, Suzaki Y, Fujikubo M (2015) Scaled model tests for the post-ultimate strength collapse behaviour of a ship’s hull girder under whipping loads. Ships Offshore Struct 10(1):31-38
Jagite G, Bigot F, Derbanne Q, Malenica S, Le Sourne H, de Lauzon J, Cartraud P (2019) Numerical investigation on dynamic ultimate strength of stiffened panels considering real loading scenarios. Ships and Offshore Structures 14(suppl):374-386
Jagite G, Bigot F, Derbanne Q, Malenica S, Le Sourne H, Cartraud P (2020) A parametric study on the dynamic ultimate strength of a stiffened panel subjected to wave- and whipping-induced stresses. Ships and Offshore Structures:1-15. https://doi.org/10.1080/17445302.2020.1790985
Khan I, Zhang S (2011) Effects of welding-induced residual stress on ultimate strength of plates and stiffened panels. Ships and Offshore Structures 6(4):297-309
Khedmati MR, Pedram M, Rigo P (2014) The effects of geometrical imperfections on the ultimate strength of aluminium stiffened plates subject to combined uniaxial compression and lateral pressure. Ships and Offshore Structures 9(1):88-109
Khedmati MR, Memarian HR, Fadavie M, Zareel MR (2016) Empirical formulations for estimation of ultimate strength of continuous aluminium stiffened plates under combined transverse compression and lateral pressure. Ships and Offshore Structures 11(3):258-277
Kim UN, Choe IH, Paik JK (2009) Buckling and ultimate strength of perforated plate panels subject to axial compression:experimental and numerical investigations with design formulations. Ships and Offshore Structures 4(4):337-361
Kim DK, Kim SJ, Kim HB, Zhang XM, Li CG, Paik JK (2015) Ultimate strength performance of bulk carriers with various corrosion additions. Ships and Offshore Structures 10(1):59-78
Kumar MS, Alagusundaramoorthy P, Sundaravadivelu R (2009) Interaction curves for stiffened panel with circular opening under axial and lateral loads. Ships and Offshore Structures 4(2):133-143
Lee DH, Paik JK (2020) Ultimate strength characterfistics of as-built ultra-large containership hull structures under combined vertical bending and torsion. Ships and Offshore Structures:1-18. https://doi.org/10.1080/17445302.2020.1747829
Lee DH, Kim SJ, Lee MS, Paik JK (2019) Ultimate limit state based design versus allowable working stress based design for box girder crane structures. Thin-Walled Struct 134:491-507
Le-Manh T, Huynh-Van Q, Phan TD, Phand HD, Nguyen-Xuan H (2017) Isogeometric nonlinear bending and buckling analysis of variable-thickness composite plate structures. Compos Struct 159:818-826
Magoga T, Flockhart C (2014) Effect of weld-induced imperfections on the ultimate strength of an aluminium patrol boat determined by the ISFEM rapid assessment method. Ships and Offshore Structures 9(2):218-235
Ozguc O, Das PK, Barltrop N (2006) A proposed method to evaluate hull girder ultimate strength. Ships and Offshore Structures 1(4):335-345
Paik JK (2007) Ultimate strength of steel plates with a single circular hole under axial compressive loading along short edges. Ships and Offshore Structures 2(4):355-360
Paik JK (2018) Ultimate limit state analysis and design of plated structures. John Wiley & Sons, Chichester
Paik JK (2020) Advanced structural safety studies with extreme conditions and accidents. Springer, Singapore
Paik JK, Lee MS (2005) A semi-analytical method for the elastic-plastic large deflection analysis of stiffened panels under combined biaxial compression/tension, biaxial in-plane bending, edge shear and lateral pressure loads. Thin-Walled Struct 43(2):375-410
Paik JK, Thayamballi AK, Lee SK, Kang SJ (2001) A semi-analytical method for the elastic-plastic large deflection analysis of welded steel or aluminum plating under combined in-plane and lateral pressure loads. Thin-Walled Struct 39:125-152
Paik JK, Kim DK, Park DH, Kim HB, Mansour AE, Caldwell JB (2013) Modified Paik-Mansour formular for ultimate strength calculations of ship hulls. Ships and Offshore Structures 8(3-4):245-260
Paik JK, Lee DH, Noh SH, Park DK, Ringsberg JW (2020a) Full-scale collapse testing of a steel stiffened plate structure under cyclic axial-compressive loading. Structures 26:996-1009
Paik JK, Lee DH, Noh SH, Park DK, Ringsberg JW (2020b) Full-scale collapse testing of a steel stiffened plate structure under axial-compressive loads triggered by brittle fracture at cryogenic condition. Ships and Offshore Structures.:1-17. https://doi.org/10.1080/17445302.2020.1787930
Paik JK, Lee DH, Noh SH, Park DK, Ringsberg JW (2020c) Full-scale collapse testing of a steel stiffened plate structure under axial-compressive loads at temperature of -80℃. Ships and Offshore Structures.:1-16. https://doi.org/10.1080/17445302.2020.1791685
Paik JK, Ryu MG, He K, Lee DH, Lee SY, Park DK, Thomas G (2020d) Full-scale fire testing to collapse of steel stiffened plate structures under lateral patch loading (part 1)-without passive fire protection. Ships and Offshore Structures.:1-16. https://doi.org/10.1080/17445302.2020.1764705
Paik JK, Ryu MG, He K, Lee DH, Lee SY, Park DK, Thomas G (2020e) Full-scale fire testing to collapse of steel stiffened plate structures under lateral patch loading (part 2)-with passive fire protection. Ships and Offshore Structures.:1-12. https://doi.org/10.1080/17445302.2020.1764706
Rahbar-Ranji A, Zarookoan A (2015) Ultimate stregth of stiffened plates with a transverse crack under uniaxial compression. Ships and Offshore Structures 10(4):416-425
Ringsberg JW, Li Z, Johnson E, Kuznecovs A, Shafieisabet R (2018) Reduction in ultimate strength capacity of corroded ships involved in collision accidents. Ships and Offshore Structures 13(sup1):155-166
Shi G, Gao D (2020) Ultimate strength of U-type stiffened panels for hatch covers used in ship cargo holds. Ships and Offshore Structures:1-12. https://doi.org/10.1080/17445302.2020.1724359
Shi G, Wang D (2012) Ultimate strength model experiment regarding a container ship’s hull structures. Ships and Offshore Structures 7(2):165-184
Tash FY, Neya BN (2020) An analytical solution for bending of transversely isotropic thick rectangular plates with variable thickness. Appl Math Model 77:1582-1602
Wang G, Sun H, Peng H, Uemori R (2009) Buckling and ultimate strength of plates with openings. Ships and Offshore Structures 4(1):43-53
Yi MS, Lee DH, Lee HH, Paik JK (2020a) Direct measurements and numerical predictions of welding-induced initial deformations in a full-scale steel stiffened plate structure. Thin-Walled Struct 153:106786. https://doi.org/10.1016/j.tws.2020.106786
Yi MS, Noh SH, Lee DH, Seo DH, Paik JK (2020b) Direct measurements, numerical predictions and simple formula estimations of welding-induced biaxial residual stresses in a full-scale steel stiffened plate structure. Structures. https://doi.org/10.1016/j.istruc.2020.05.030
Zenkour AM (2003) An exact solution for the bending of thin rectangular plates with uniform, linear, and quadratic thickness variations. Int J Mech Sci 45:295-315
Zhang S (2016) A review and study on ultimate strength of steel plates and stiffened panels in axial compression. Ships and Offshore Structures 11(1):81-91
Zhang J, Hua Z, Tang W, Wang F, Wang S (2018) Buckling of externally pressurised egg-shaped shells with variable and constant wall thickness. Thin-Walled Struct 132:111-119

Memo

Memo:
Received date:2020-05-08;Accepted date:2020-08-01。
Corresponding author:Jeom Kee Paik,j.paik@ucl.ac.uk
Last Update: 2021-04-07