«Previous Article|Table of Contents|Next Article»

Journal of Marine Science and Application[ISSN:1002-2848/CN:61-1400/f]

卷:

期数:

2014年2

页码:

206-211

栏目:

出版日期:

2014-06-25

Info

Title:

Numerical Modeling of Exhaust Smoke Dispersion for a Generic Frigate and Comparisons with Experiments

Author(s):

Selma Ergin and Erinç Dobrucal?

Affilations:

Author(s):

Selma Ergin and Erinç Dobrucal?

1. Faculty of Naval Architecture and Ocean Engineering, Istanbul Technical University, Maslak, Istanbul 34469, Turkey 2. Turkish Naval Academy, Tuzla, Istanbul 34942, Turkey

Keywords:

finite volume method;  CFD;  buoyancy effect;  exhaust smoke;  generic frigate;  smoke dispersion

分类号:

-

DOI:

10.1007/s11804-014-1246-x

Abstract:

The exhaust smoke dispersion for a generic frigate is investigated numerically through the numerical solution of the governing fluid flow, energy, species and turbulence equations. The main objective of this work is to obtain the effects of the yaw angle, velocity ratio and buoyancy on the dispersion of the exhaust smoke. The numerical method is based on the fully conserved control-volume representation of the fully elliptic Navier-Stokes equations. Turbulence is modeled using a two-equation (k-ε) model. The flow visualization tests using a 1/100 scale model of the frigate in the wind tunnel were also carried out to determine the exhaust plume path and to validate the computational results. The results show that down wash phenomena occurs for the yaw angles between ψ =10° and 20°. The results with different exhaust gas temperatures show that the buoyancy effect increases with the increasing of the exhaust gas temperature. However, its effect on the plume rise is less significant in comparison with its momentum. A good agreement between the predictions and experiment results is obtained.

References:

ANSYS, Inc. ANSYS CFX tutorials (1999). Canonsburg, USA. http://orange.engr.ucdavis.edu/Documentation12.1/121/CFX/xtutr.pdf.
Baham GJ, McCallum D (1977). Stack design technology for naval and merchant ships. SNAME Transactions, 85, 324-349.
Dobrucal? E, Ergin S (2012). A study of exhaust smoke dispersion for a generic frigate. Gemi ve Deniz Teknolojisi Dergisi, 192, 16-22. (in Turkish)
Dobrucal? E (2013). Numerical and experimental study of exhaust smoke dispersion for naval ships, PhD Thesis, Istanbul Technical University, Istanbul, Turkey, 1-238. (in Turkish)
Ergin S, Paral? Y (2010). A numerical study of exhaust smoke-superstructure interaction for naval ships. Gemi ve Deniz Teknolojisi Dergisi, 185, 4-6. (in Turkish)
Ergin S, Paral? Y, Dobrucal? E (2011). A numerical investigation of exhaust smoke-superstructure interaction on a naval ship. Proc. of IMAM 2011, Sustainable Maritime Transportation and Exploitation of Sea Resource, Genoa, Italy, 109-115.
Fitzgerald MP (1986). A method to predict stack performance. Naval Engineering Journal, 98, 35-46.
Park S, Heo J, Yu BS, Rhee SH (2011). Computational analysis of ship’s exhaust-gas flow and its application for antenna location. Applied Thermal Engineering, 31(10), 1689-1702.
Patankar SV (1980). Numerical heat transfer and fluid flow. McGraw-Hill, New York, 1-195.
Seshadri V, Singh SN, Kulkarni PR (2006). A study of the problem of ingress of exhaust smoke into the GT intakes in naval ships. J. Ship Technology, 2(1), 22-35.
Syms GF (2004). Numerical simulation of frigate airwakes, Int. J. of Computational Fluid Dynamics, 18(2), 199-207.
Kulkarni PR, Singh SN, Seshadri V (2005). Flow visualization studies of exhaust smoke-superstructure interaction on naval ships. Naval Engineers Journal, 117(1), 41-56.
Kulkarni PR, Singh SN, Seshadri V (2007). Parametric studies of exhaust smoke–superstructure interaction on a naval ship using CFD. Computer & Fluids, 36(4), 794-816.
Versteeg HK, Malalasekera W (1995). An introduction to computational fluid dynamics the finite volume method. Prentice Hall, Glasgow, UK, 1-495.

Memo

Memo:

-

Commonly used function

Last Update: 2014-06-10