«Previous Article|Table of Contents|Next Article»

Journal of Marine Science and Application[ISSN:1002-2848/CN:61-1400/f]

卷:

期数:

2015年3

页码:

250-260

栏目:

出版日期:

2015-09-08

Info

Title:

Influence of Tacking Sequence on Residual Stress and Distortion of Single Sided Fillet Submerged Arc Welded Joint

Author(s):

Arpan Kumar Mondal;  Pankaj Biswas;  Swarup Bag

Affilations:

Author(s):

Arpan Kumar Mondal;  Pankaj Biswas;  Swarup Bag

Department of Mechanical Engineering, Indian Institute of Technology Guwahati, Guwahati 781039, India

Keywords:

residual stress; distortion; submerged arc welding (SAW); material deposition; finite element method

分类号:

-

DOI:

10.1007/s11804-015-1320-z

Abstract:

Submerged arc welding (SAW) is advantageous for joining high thickness materials in large structure due to high material deposition rate. The non-uniform heating and cooling generates the thermal stresses and subsequently the residual stresses and distortion. The longitudinal and transverse residual stresses and angular distortion are generally measured in large panel structure of submerged arc welded fillet joints. Hence, the objective of this present work is to quantify the amount of residual stress and distortion in and around the weld joint due to positioning of stiffeners tack. The tacking sequence influences the level of residual stress and proper controlling of tacking sequences is required to minimize the stress. In present study, an elasto-plastic material behavior is considered to develop the thermo mechanical model which predicts the residual stress and angular distortion with varying tacking sequences. The simulated result reveals that the tacking sequence heavily influences the residual stress and deformation pattern of the single sided fillet joint. The finite element based numerical model is calibrated by comparing the experimental data from published literature. Henceforth, the angular distortions are measured from an in-house developed experimental set-up. A fair agreement between the predicted and experimental results indicates the robustness of the developed numerical model. However, the most significant conclusion from present study states that tack weld position should be placed opposite to the fillet weld side to minimize the residual stress.

References:

Adak M, Mandal NR (2003). Thermo-mechanical analysis through a pseudolinear equivalent constant stiffness system. Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, 217(1), 1-9.
Biswas P, Deepati AK, Mandal NR, Mahapatra MM (2011a). A study on the effect of welding sequence in fabrication of large stiffened plate panels. Journal of Marine Science and Application, 10(4), 429-436.DOI: 10.1007/s11804-011-1088-8
Biswas P, Mahapatra MM, Mandal NR (2010). Numerical and experimental study on prediction of thermal history and residual deformation of double-sided fillet welding. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 224, 125-134.DOI: 10.1243/09544054JEM1666
Biswas P, Mandal NR (2010). Thermo-mechanical finite element analysis and experimental investigation of single-pass single-sided submerged arc welding of C-Mn steel plates. Proceedings of the Institution of Mechanical Engineers, Part B: Journal Engineering Manufacture, 224(4), 627-639.
Biswas P, Mandal NR, Das S (2011b). Prediction of welding deformations of large stiffened panels using average plastic strain method. Science and Technology of Welding and Joining, 16(3), 227-231.
Cheng X, Henry JP, Thomas GH, Vladimir L, John WF (2012). Neutron diffraction measurements for residual stresses in AL-6XN stainless steel welded beams. InTech Open Access Publisher, Rijeka, Croatia, 25-48.DOI: 10.5772/37537
Cho DW, Kiran DV, Song WH, Na SJ (2014). Molten pool behavior in the tandem submerged arc welding process. Journal of Materials Processing Technology, 214(11), 2233-2247.DOI: 10.1016/j.jmatprotec.2014.04.032
Cho DW, Song WH, Cho MH, Na SJ (2013). Analysis of submerged arc welding process by three-dimensional computational fluid dynamics simulations. Journal of Materials Processing Technology, 213(12), 2278-2291.DOI: 10.1016/j.jmatprotec.2013.06.017
Dean D (2009). FEM prediction of welding residual stress and distortion in carbon steel considering phase transformation effects. Materials and Design, 30(2), 359-366.DOI: 10.1016/j.matdes.2008.04.052
Dong P (2001). Residual stress analyses of a multi-pass girth weld: 3-D special shell versus axisymmetric models. Journal of Pressure Vessels Technology, 123(2), 207-213.DOI: 10.1115/1.1359527
Fanous FZI, Maher YA, Wifi SA (2003). 3-D finite element modeling of the welding process using element birth and element movement techniques. Journal of Pressure Vessel Technology, 125(2), 144-150.DOI: 10.1115/1.1564070
Friedman E (1975). Thermomechanical analysis of the welding process using the finite element method. Journal of Pressure Vessel Technology, 97(3), 206-213.DOI: 10.1115/1.3454296
Hibbitt HD, Marcal PV (1973). Numerical thermo-mechanical model for the welding and subsequent loading of a fabricated structure. Computers and Structures, 3(5), 1145-1174.DOI: 10.1016/0045-7949(73)90043-6
Hong JK, Tsai CL, Dong P (1998). Assessment of numerical procedures for residual stress analysis of multipass weld. Welding Journal, 77(9), 372s-382s.
Hosseinzadeh F, Bouchard P (2011). Application of the contour method to validate residual stress predictions. Second International Conference on Advances in Nuclear Materials (ANM-2011), Mumbai, India, 9-11.
Kiran DV, Basu B, De A (2012). Influence of process variables on weld bead quality in two wire tandem submerged arc welding of HSLA steel. Journal of Materials Processing Technology, 212(10), 2041-2050.DOI: 10.1016/j.jmatprotec.2012.05.008
Kiran DV, Basu B, Shah AK, Mishra S, De A (2011). Three-dimensional heat transfer analysis of two wire tandem submerged arc welding. The Iron and Steel Institute of Japan International, 51(5), 793-798.
Lan L, Qiu C, Zhao D, Gao X, Du L (2012). Analysis of microstructural variation and mechanical behaviors in submerged arc welded joint of high strength low carbon bainitic steel. Materials Science & Engineering: A, 558, 592-601.DOI: 10.1016/j.msea.2012.08.057
Lindgren LE (2001). Finite element modeling and simulation of welding. Part 2: improved material modeling. Journal of Thermal Stresses, 24(3), 195-231.DOI: 10.1080/014957301300006380
Lindgren LE (2006). Numerical modeling of welding. Computer Methods in Applied Mechanical and Engineering, 195, 6710-6736.
Lu Y, Chen SJ, Shi Y, Li X, Chen J, Kvidahl L, Zhang YM (2014a). Double-electrode arc welding process: principle, variants, control and developments. Journal of Manufacturing Processes, 16(1), 93-108.DOI: 10.1016/j.jmapro.2013.08.003
Lu Y, Chen JS, Zhang YM, Kvidahl L (2014b). Predictive control based double-electrode submerged arc welding for filet joints. Journal of Manufacturing Processes, 6(4), 415-426.DOI: 10.1016/j.jmapro.2014.05.001
Luo Y (1997). Description of inherent strain and its application to prediction of welding deformation and residual stress under multi-pass welding. PhD thesis, Osaka University, Osaka, Japan.
Luo J, Dong Y, Li L, Wang X (2014). Microstructure of 2205 duplex stainless steel joint in submerged arc welding by post weld heat treatment. Journal of Manufacturing Processes, 16(1), 144-148.DOI: 10.1016/j.jmapro.2013.06.013
Ma NX, Ueda Y, Murakawa H (1995). FEM Analysis of 3D welding residual stresses and angular distortion in T-type fillet welds. Transaction of Joining and Welding Research Institute, 24(2), 115-122.
Mahapatra MM, Datta GL, Pradhan B, Mandal NR (2006). Three-dimensional finite element analysis to predict the effects of SAW process parameters on temperature distribution and angular distortions in single-pass butt joints with top and bottom reinforcements. International Journal of Pressure Vessels and Piping, 83(10), 721-729.DOI: 10.1016/j.ijpvp.2006.07.011
Mahiskar GI, Chadge RB, Ambade SP, Patil AP (2014). Thermo-mechanical analysis of multi-pass bead-on-plate welding. Procedia Materials Science, 5, 2522-2531.DOI: 10.1016/j.mspro.2014.07.504
Murugan S, Rai SK, Kumar PV, Jayakumar T, Raja B, Bose MSC (2001). Temperature distribution and residual stresses due to multipass welding in type 304 stainless steel and low carbon steel weld pads. International Journal of Pressure Vessels and Piping, 78(4), 307-317.DOI: 10.1016/S0308-0161(01)00047-3
Nart E, Celik Y (2013). A practical approach for simulating submerged arc welding process using FE method. Journal of Constructional Steel Research, 84, 62-71.DOI: 10.1016/j.jcsr.2013.02.005
Norton JH, Rosenthal D (1944). Stress measurement by X-ray diffraction. Proceedings of the Society for Experimental Stress Analysis, 1(2), 73-76.
Park JU, An G, Lee HW (2012). Effect of external load on angular distortion in fillet welding. Materials and Design, 42, 403-410.DOI: 10.1016/j.matdes.2012.06.006
Radaj D (1992). Heat effects of welding: Temperature field residual stress distortion. Springer-Verlag, New York.
Rybicki EF, Schmueser DW, Stonesifer RW, Groom JJ, Mishler HW (1978). A finite-element model for residual stresses and deflections in girth-butt welded pipes. Journal of Pressure Vessel Technology, 100(3), 256-262.DOI: 10.1115/1.3454464
Teng TL, Fung CP, Chang PH, Yang WC (2001). Analysis of residual stresses and distortions in T-joint fillet welds. International Journal of Pressure Vessels and Piping, 78(8), 523-538.DOI: 10.1016/S0308-0161(01)00074-6
Teng TL, Lin CC (1998). Effect of welding conditions on residual stresses due to butt welds. International Journal of Pressure Vessels and Piping, 75(12), 857-864.DOI: 10.1016/S0308-0161(98)00084-2
Ueda Y, Fukuda K, Kim YC (1986). New measuring method of axisymmetric three dimensional residual stresses using inherent strains as parameters. ASME Journal of Engineering Material and Technology, 108(4), 328-334.DOI: 10.1115/1.3225890
Ueda Y, Fukuda K, Tanigawa M (1979). New measuring method of three dimensional residual stresses based on theory of inherent strain. Transactions of Joining and Welding Research Institute Osaka University, 8(2), 89-96.
Ueda Y, Yamakawa T (1971). Analysis of thermal elastic-plastic stress and strain during welding by finite element method. Transactions of the Japan Welding Society, 2(2), 90-100.
Ueda Y, Yuan MG (1993). Prediction of residual stresses in butt welded plates using inherent strains. Journal of Engineering Materials and Technology, 115(4), 417-423.DOI: 10.1115/1.2904240
Wang J, Ma N, Murakawa H, Teng B, Yuan S (2011). Prediction and measurement of welding distortion of a spherical structure assembled from multi thin plates. Materials and Design, 32(10), 4728-4737.DOI: 10.1016/j.matdes.2011.06.047
Withers PJ, Bhadeshia HKDH (2001). Overview-Residual stress. Part 1–Measurement techniques. Materials Science and Technology, 17(4), 355-365.
Yuan MG, Ueda Y (1996). Prediction of residual stresses in welded T-and I-Joints using inherent strains. Journal of Engineering Materials and Technology, 118(2), 229-34.DOI: 10.1115/1.2804892

Memo

Memo:

收稿日期:2014-10-29;改回日期:2015-4-8。
基金项目:Supported by the Indian Institute of Technology Guwahati under Grant No: SG/ME/PB/P/01.
通讯作者:Pankaj Biswas, E-mail:pankaj.biswas@iitg.ernet.in

Commonly used function

Last Update: 2015-09-01