«Previous Article|Table of Contents|Next Article»

Journal of Marine Science and Application[ISSN:1002-2848/CN:61-1400/f]

卷:

期数:

2021年3

页码:

581-582

栏目:

出版日期:

2021-09-25

Info

Title:

Correction to: Ultimate Strength of Ships and Offshore Structures

Author(s):

Carlos Guedes Soares

Affilations:

Author(s):

Carlos Guedes Soares

Centre for Marine Technology and Ocean Engineering (CENTEC), Instituto Superior Técnico, Universidade de Lisboa, 1409-001, Lisboa, Portugal

Keywords:

-

分类号:

-

DOI:

10.1007/s11804-021-00209-y

Abstract:

-

References:

Al-Hamati AA, Duan ML, An C, Guedes Soares C, Estefen S (2020) Buckling properties of SFC for oil /gas processing in deep-waters. J Mar Sci Appl 19(4): 642-657
Barsotti B, Gaiotti M, Rizzo CM (2020) Recent industrial developments of marine composites limit states and design approaches on strength. J Mar Sci Appl 19(4): 553-566
Cho S-R, Muttaqie T, Lee SH, Paek J, Sohn JM (2020) Ultimate strength assessment of steel-welded hemispheres under external hydrostatic pressure. J Mar Sci Appl 19(4): 615-633
CSR (2006) ABS, DNV, LLOYD’S REGISTER. Common Structural Rules for Double Hull Oil Tankers
Gordo JM, Guedes Soares C (1993) Approximate Load Shortening Curves for Stiffened Plates under Uniaxial Compression. Faulkner D, Cowling MJ & Incecik A, (Eds.). Integrity of Offshore Structures, 5, Proc 5th International Symposium on Integrity of Offshore Structures. Univ Glasgow, 17-18 June: EMAS;189-211
Guedes Soares C, Duan WY (2018) Wave loads on ships and offshore structures. J Mar Sci Appl 17(3): 281-283
Guedes Soares C, Dogliani M, Ostergaard C, Parmentier G, Pedersen PT (1996) Reliability based ship structural design. Trans Soc Naval Architects Marine Eng (SNAME) 104:357-389
IACS (2014) Common structural rules for bulk carriers and oil tankers. Societies, International Association of Classification
IMO (2006) Maritime Safety Committee MSC 81/INF.6. Goal-based new ship construction standards-linkage between FSA and GBS International Maritime Organisation
Lee HH, Paik JK (2020) Ultimate compressive strength computational modelling for stiffened plate panels with non-uniform thickness. J Mar Sci Appl 19(4): 658-673
Liu B, Doan VT, Garbatov Y, Wu WG, Guedes Soares C (2020) Study on ultimate compressive strength of aluminium-alloy plates and stiffened panels. J Mar Sci Appl 19(4); 534-552
Nouri Z, Khedmati MR (2020) Progressive collapse analysis of a FPSO vessel hull girder under vertical bending considering different corrosion models. J Mar Sci Appl 19(4): 674-692
Primorac BB, Parunov J, Guedes Soares C (2020) Structural reliability analysis of ship hulls accounting for collision or grounding damage. J Mar Sci Appl 19(4): 717-733
Romanoff J, K?rgesaar M, Remes H (2020) Emerging challenges for numerical simulations of quasi-static collision experiments on laser-welded thin-walled steel structures. J Mar Sci Appl 19(4): 567-583
Smith CS (1977) Influence of Local Compressive Failure on Ultimate Longitudinal Strength of a Ship’s Hull. Proc. Conf. on Practical Design of Ships and Mobile Units (PRADS), Tokyo, 73-79
Tekgoz M, Garbatov Y, Guedes Soares C (2020) Review of ultimate strength assessment of ageing and damaged ship structures. J Mar Sci Appl 19(4): 512-533
Vu VT, Dong DT (2020) Hull girder ultimate strength assessment considering local corrosion. J Mar Sci Appl 19(4): 693-704
Wahab MMA, Kurian VJ, Liew MS, Kim DK (2020) Condition assessment techniques for aged fixed-type offshore platforms considering decommissioning: A historical review. J Mar Sci Appl 19(4): 584-614
Xu W, Guedes Soares C (2020) Numerical investigation on the ultimate strength of box beams with impact damage. J Mar Sci Appl 19(4): 705-716
Zhang J, Li SQ, Cui WC, Xiang K, Wang F, TangWX (2020) Buckling of multiple intersecting spherical shells under uniform external pressure. J Mar Sci Appl 19(4): 634-641

Memo

Memo:

Corresponding author:Carlos Guedes Soares,E-mail:c.guedes.soares@centec.tecnico.ulisboa.pt

Commonly used function

Last Update: 2021-11-04