|Table of Contents|

Citation:
　Shan Wang,C. Guedes Soares.Review of Ship Slamming Loads and Responses[J].Journal of Marine Science and Application,2017,(4):427-445.[doi:10.1007/s11804-017-1437-3]
Click and Copy

Review of Ship Slamming Loads and Responses

Info

Title:
Review of Ship Slamming Loads and Responses
Author(s):
Shan Wang;  C. Guedes Soares
Affilations:
Author(s):
Shan Wang;  C. Guedes Soares
Centre for Marine Technology and Ocean Engineering(CENTEC), Instituto Superior Técnico, Universidade de Lisboa, Lisboa 1049-001, Portugal
Keywords:
review; slamming probability; ship slamming; hydroelasticity
分类号:
-
DOI:
10.1007/s11804-017-1437-3
Abstract:
The paper presents an overview of studies of slamming on ship structures. This work focuses on the hull slamming, which is one of the most important types of slamming problems to be considered in the ship design process and the assessment of the ship safety. There are three main research aspects related to the hull slamming phenomenon, a) where and how often a slamming event occurs, b) slamming load prediction and c) structural response due to slamming loads. The approaches used in each aspect are reviewed and commented, together with the presentation of some typical results. The methodology, which combines the seakeeping analysis and slamming load prediction, is discussed for the global analysis of the hull slamming of a ship in waves. Some physical phenomena during the slamming event are discussed also. Recommendations for the future research and developments are made.

References:

Aarsnes JV, 1996. Drop test with ship sections-effect of roll angle.Report 603834.00.01. Norwegian Marine Technology Research Institute, Trondheim.
Alexandru I, Brizzolara S, Viviani M, Couty N, Donner R, Hermundstad O, Kukkanen T, Malenica S, Termarel P, 2007.Comparison of experimental and numerical impact loads on ship-like sections. In:Guedes Soares C, Das PK (Eds).Advancements in Marine Structures. Taylor and Francis, London, 339-349.
Algarín R, Bula A, Tascón O, 2011. CFD modeling of 2D asymmetric entry impact along with horizontal velocity. Ship Science & Technology, 5(9), 99-106.
Aly AM, Asai M, Sonoda Y, 2011. Simulation of free falling rigid body into water by a stabilized incompressible SPH method.Ocean Systems Engineering, 1(3), 207-222.
Amin W, 2009. Non-linear unsteady wave loads on large high speed wave piercing catamarans. PhD Thesis, School of Engineering, University of Tasmania, Hobart, TAS, Australia.
Aquelet N, Souli M, Olovsson L, 2006. Euler-Lagrange coupling with damping effects:Application to slamming problems.Computer Methods in Applied Mechanics and Engineering, 195(1), 110-132.
Armand JL, Cointe R, 1987. Hydrodynamic impact analysis of a cylinder. Proc. Fifth Inter. Offshore Mech. and Arctic Engng.Symp, Tokyo, Japan, 1, 609-634.
Attfield K, 1975. Gas platforms-How designers underestimated the North Sea. Offshore Technology, 12-22.
Baarholm R, Faltinsen OM, Herfjord, K. Wave impact on decks of floating platforms. Practical Design of Ships and Other Floating Structures. Proceedings of the Eighth International Symposium on Practical Design of Ships and Other Floating Structures.
Barjasteh M, Zeraatgar H, Javaherian MJ, 2016. An experimental study on water entry of asymmetric wedges. Applied Ocean Research, 58, 292-304.
Battistin D, Iafrati A, 2003. Hydrodynamic loads during water entry of two-dimensional and axisymmetric bodies. Journal of Fluids and Structures, 17, 643-664.
Belik O, Bishop RED, Price WG, 1983. A simulation of ship responses due to slamming in irregular head waves. Trans. R.Inst. Naval Archit., 125, 237-254.
Bishop RED, Price WG, 1974. On the modal analysis of ship strength. Proceedings of the Royal Society of London, A 341, 121-134.
Bishop RED, Price WG, 1979. Hydroelasticity of Ships. Cambridge University Press, London, UK.
Boesten E, 2006. The M/S Estonia disaster and the treatment of human remains. In:Bierens JJLM (Eds.):Handbook on Drowning, 650-652.
Cheon JS, Jang BS, Yim KH, Lee HD, Koo BY, Ju, H, 2016. A study on slamming pressure on a flat stiffened plate considering fluid-structure interaction. Journal of Marine Science and Technology, 21(2), 309-324.
Clauss GF, Klein M, Dudek M, 2011. Model test report-Test Campaign I (TCI)-Chemical Tanker (TUB), EXTREME SEAS project report (confidential).
Colicchio G, Greco M, Miozzi M, Lugni C, 2009. Experimental and numerical investigation of the water-entry and water-exit of a circular cylinder. Proceedings of the 24th Int. Workshop on Water Waves and Floating Bodies, Zelenogorsk, Russia, 19-22.
Corak M, Parunov J, Guedes Soares C, 2015. Probabilistic load combination factors of wave and whipping bending moments.Journal of Ship Research, 59(1), 11-30.
Das K, Batra RC, 2011. Local water slamming impact on sandwich composite hulls. Journal of Fluids and Structures, 27(4), 523-551.
Datta N, Siddiqui MA, 2016. Hydroelastic analysis of axially loaded Timoshenko beams with intermediate end fixities under hydrodynamic slamming loads. Ocean Engineering, 127, 124-134.
Davis MR, Whelan JR, 2007. Computation of wet deck bow slam loads for catamaran arched cross sections. Ocean Engineering, 34(17), 2265-2276.
De Backer G, Vantorre M, Beels C, 2009. Experimental investigation of water impact on axisymmetric bodies. Appl.Ocean Res., 31, 143-156.
Dhavalikar S, Awasare S, Joga R, Kar AR, 2015. Whipping response analysis by one way fluid structure interaction-A case study. Ocean Engineering, 103, 10-20.
Dobrovol’skaya ZN, 1969. On some problems of similarity flow of fluids with a free surface. Journal of Fluid Mechanics, 36, 805-829.
El Malki Alaoui A, Nême A, Tassin A, Jacques N, 2012.Experimental study of coefficients during vertical water entry of axisymmetric rigid shapes at constant speeds. Applied Ocean Research, 37, 183-197.
El Moctar O, Ley J, 2016. Computational fluid and structure dynamics methods to assess wave-induced loads and hydroelasticity effects. In:Guedes Saores C, Santos T A (Eds).Maritime Engineering and Technology 3, Taylor and Francis, 1, 19-27.
El Moctar O, Schellin TE, Priebe T, 2006. CFD and FE methods to predict wave loads and ship structural response. 26th Symp.Naval Hydrodynamics, Rome.
Engle A, Lewis R, 2003. A comparison of hydrodynamic impacts prediction methods with two dimensional drop test data. Marine structures, 16(2), 175-182.
Facci AL, Panciroli R, Ubertini S, Porfiri M, 2015. Assessment of PIV-based analysis of water entry problems through synthetic numerical datasets. Journal of Fluids and Structures, 55, 484-500.
Facci AL, Porfiri M, Ubertini S, 2016. Three-dimensional water entry of a solid body:A computational study. Journal of Fluids and Structures, 66, 36-53.
Facci AL, Ubertini S, 2015. Numerical assessment of similitude parameters and dimensional analysis for water entry problems.Mathematical Problems in Engineering.
Faltinsen OM, 1993. Sea loads on ships and offshore structures solutions. Cambridge University Press, Cambridge.
Faltinsen OM, 1997. The effect of hydroelasticity on ship slamming.Philos. Trans. R. Soc. London A, 355, 575-591.
Faltinsen OM, 1999. Water entry of a wedge by hydroelastic orthotropic plate theory. Journal of Ship Research, 43, 180-193.
Faltinsen OM, 2000. Hydroelastic slamming. Journal of Marine Science and Technology, 5, 49-65.
Faltinsen OM, 2005. Hydrodynamics of high-speed marine vehicles.Cambridge University Press, Cambridge.
Faltinsen OM, Kvalsvold J, Aarsnes JV, 1997. Water impact on a horizontal elastic plate. Journal of Marine Science and Technology, 2, 87-100.
Farsi M, Ghadimi P, 2016. Effect of flat deck on catamaran water entry through smoothed particle hydrodynamics. Proceedings of the Institution of Mechanical Engineers, Part M:Journal of Engineering for the Maritime Environment, 230(2), 267-280.
Ferro G, Mansour AE, 1985. Probabilistic analysis of combined slamming and wave-induced responses. Journal of Ship Research, 29(3), 170-188.
Fonseca N, Antunes E, Guedes Soares C, 2006. Whipping response of vessels with large amplitude motions. Proceedings of the 25th International Conference on Offshore Mechanics and Arctic Engineering, paper OMAE2006-92412.
Fonseca N, Guedes Soares C, 1998a. Time domain analysis of large amplitude vertical motions and wave loads. Journal of Ship Research, 42(2), 100-113.
Fonseca N, Guedes Soares C, 1998b. Non-linear wave induced responses of ships in irregular seas. ASME Proc 17th Int Conf on Offshore Mech. and Arctic Engin.(OMAE 98).
French BJ, Thomas GA, Davis MR, 2015. Slam occurrences and loads of a high-speed wave piercer catamaran in irregular seas.J Engineering for the Maritime Environment, 229(1), 45-57.
Friis-Hansen P, 1994. On combination of slamming and wave induced responses. Journal of Ship Research, 38(2), 104-114.
Gadelho JFM, Karmakar D, Lavrov A, Guedes Soares C, 2015.CFD analysis of a rigid bottom fixed submerged plates. In:Guedes Soares C (Ed.). Renewable Energies Offshore. Taylor & Francis Group, London, 531-537.
Ghadimi P, Chekab MAF, Dashtimanesh A, 2014. Numerical simulation of water entry of different arbitrary bow sections.Journal of Naval Architecture and Marine Engineering, 11(2), 117-129.
Ghadimi P, Feizi Chekab MA, Dashtimanesh A, 2013. A numerical investigation of the water impact of an arbitrary bow section.ISH Journal of Hydraulic Engineering, 19(3), 186-195.
Gingold RA, Monaghan JJ, 1977. Smoothed particle hydrodynamics:theory and application to non-spherical stars.Royal Astronautical Society, 181:375-389.
Greenhow M, Lin W, 1985. Numerical simulation of nonlinear free surface flows generated by wedge entry and wave maker motions. 4th International Conference on Numerical Ship Hydrodynamics, Washington, DC.
Guedes Soares C, 1989. Transient response of ship hulls to wave impact. International Shipbuilding Progress, 36, 137-156.
Guedes Soares C, Pascoal R, Antão EM, Voogt AJ, Buchner B, 2007. An approach to calculate the probability of wave impact on an FPSO bow. Journal of Offshore Mechanics and Arctic Engineering, 129(2), 73-80.
Guo BD, Qu QL, Wu JL, Liu PQ, 2013. Fluid-structure interaction modeling by ALE and SPH. Applied Mechanics and Materials, 275, 393-397.
Henry JR, Bailey FC, 1970. Slamming of ships:a critical review of the current state of knowledge. Teledyne Materials Research Co., Waltham, MA., USA.
Hermundstad OA, Moan T, 2005. Numerical and experimental analysis of bow flare slamming on a Ro-Ro vessel in regular oblique waves. Journal of Marine Science and Technology, 10, 105-122.
Hermundstad OA, Moan T, 2009. Efficient methods for direct calculation of slamming loads on ships. Transactions-Society of Naval Architects and Marine Engineers, 117, 156-181.
Hirdaris SE, Temarel P, 2009. Hydroelasticity of ships:recent advances and future trends. Proceedings of the Institution of Mechanical Engineers, Part M:Journal of Engineering for the Maritime Environment, 223(3), 305-330.
Hosokawa S, Moriyama S, Tomiyama A, Takada N, 2003. PIV measurement of pressure distributions about single bubbles.Journal of Nuclear Science and Technology, 40(10), 754-762.
Howison SD, Ochendon JR, Wilson SK, 1991. Incompressible water-entry problems at small deadrise angles. Journal of Fluid Mechanics, 222, 215-230.
Hu ZZ, Greaves D, Raby A, 2016. Numerical wave tank study of extreme waves and wave-structure interaction using OpenFoamR. Ocean Engineering, 126, 329-342.
Huera-Huarte FJ, Jeon D, Gharib M, 2011. Experimental investigation of water slamming loads on panels. Ocean Engineering, 38(11), 1347-1355.
Iwanowski B, Fujikubo M, Yao T, 1993. Analysis of horizontal water impact of a rigid body with the air cushion effect. Journal of the Society of Naval Architects of Japan, 293-302.
Jacobsen NG, Fuhrman DR, Fredsøe J, 2012. A wave generation toolbox for the open -source CFD library:OpenFoamR.International Journal for Numerical Methods in Fluids, 70(9), 1073-1088.
Jalalisendi M, Osma SJ, Porfiri M, 2015. Three-dimensional water entry of a solid body:A particle image velocimetry study.Journal of Fluids and Structures, 59, 85-102.
Jalalisendi M, Panciroli R, Cha Y, Porfiri M, 2014. A particle image velocimetry study of the flow physics generated by a thin lamina oscillating in a viscous fluid. Journal of Applied Physics, 115(5), 054901.
Jalalisendi M, Shams A, Panciroli R, Porfiri M, 2015. Experimental reconstruction of three-dimensional hydrodynamic loading in water entry problems through particle image velocimetry.Experiments in Fluids, 56(2), 1-17.
Jensen JJ, 2001. Load and global response of ships. Elsevier Ocean Engineering Book Series, 4, Elsevier, Netherlands.
Judge C, Troesch A, Perlin M, 2004. Initial water impact of a wedge at vertical and oblique angles. Journal of Engineering Mathematics, 48(3/4), 279-303.
Gong Kai, Liu Hua, Wang BL, 2009. Water entry of a wedge based on SPH model with an improved boundary treatment. Journal of Hydrodynamics, Ser. B, 21(6), 750-757.
Kapsenberg GK, 2011. Slamming of ships:where are we now? Philosophical Transactions of the Royal Society of London A:Mathematical, Physical and Engineering Sciences, 369(1947), 2892-2919.
Kapsenberg GK, van’t Veer AP, Hackett JP, Levadou MMD, 2002.Whipping loads due to aft body slamming. 24th Symposium on Naval Hydrodynamics, Fukuoka, Japan, 25-39.
Kean AJ, Temarel P, Wu XJ, Wu YS, 1991. Hydroelasticity of non-beamlike ships in waves. The Dynamics of Ships. The Royal Soc., London, 153.
Khabakhpasheva TI, 2006. Impact of a surface wave on an elastic hull. Fluid Dynamics, 41(3), 424-433.
Khabakhpasheva TI, Kim Y, Korobkin AA, 2014. Generalised Wagner model of water impact by numerical conformal mapping. Applied Ocean Research, 44, 29-38.
Khabakhpasheva TI, Korobkin AA, 2013. Elastic wedge impact onto a liquid surface:Wagner’s solution and approximate models. Journal of Fluids and Structures, 36, 32-49.
Kleefsman KMT, 2005. Water impact loading on offshore structures. Faculty of Mathematics and Natural Sciences, RUG University Groningen, Groningen.
Kihara H, 2004. March. Numerical modeling of flow in water entry of a wedge. Proc. 19th Int. Workshop on Water Waves and Floating Bodies, Cortona, Italy, 28-31.
Koehler JBR, Kettleborough CF, 1977. Hydrodynamic impact of a falling body upon a viscous incompressible fluid. Journal of Ship Research, 21, 165-181.
Korobkin AA, 1996. Water impact problems in ship hydrodynamics.In:Ohkusu M (ed). Advances in Marine hydrodynamics.Computational Mechanics, Boston, 323-371.
Korobkin AA, 1998. Wave impact on the center of an Euler beam.Journal of Applied Mathematics and Technical Physics, 39(5), 770-781.
Korobkin AA, 2004. Analytical models of water impact. European Journal of Applied Mathematics, 15, 821-838.
Korobkin AA, Gueret R, Malenica S, 2006. Hydroelastic coupling of beam finite element model with Wagner theory of water impact. Journal of Fluids and Structures, 22, 493-504.
Korobkin AA, Malenica S, 2005. Modified Logvinovich model for hydrodynamic loads on asymmetric contours entering water. 20th International Workshop on Water Waves and Floating Bodies, Oslo.
Korobkin AA, Scolan YM, 2006. Three-dimensional theory of water impact. Part 2. Linearized Wagner problem. Journal of Fluid Mechanics, 549, 343-373.
Kvalsvold J, Faltinsen OM, 1993. Hydroelastic modelling of slamming against the wetdeck of a catamaran. Pro Second Int Conf Fast Sea Transportation, Fast’93, Japan, 681-697.
Kvalsvold J, Faltinsen OM, 1994. Slamming loads on wetdecks of multihull vessels. Pro Second Int Conf Hydroelasticity in Marine Technology, Trondheim, Norway, 205-220.
Kvalsvold J, Faltinsen OM, 1995. Hydroelastic modelling of wetdeck slamming on multihull vessels. J. Ship Res., 39, 225-239.
Kvalsvold J, Faltinsen OM, Aarsnes JV, 1995. Effect of structural elasticity on slamming against wetdecks of multihull vessels.Pro. 6th Int. Symp. Practical Design of Ships and offshore Mobile Units (PRADS), Seoul, South Korea, 1.684-1.699.
Kim K, Shin YS, Wang S, 2008. A stern slamming analysis using three-dimensional CFD simulation. ASME 2008 27th International Conference on Offshore Mechanics and Arctic Engineering. American Society of Mechanical Engineers, 929-934
Lakitosh F, Ananthakrishnan P, 2012. Analysis of ship hull plate vibrations induced by wave and slamming loads. Proc. 31st International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 289-298.
Lewis SG, Hudson DA, Turnock SR, Taunton DJ, 2010. Impact of a free-falling wedge with water:synchronized visualization, pressure and acceleration measurements. Fluid Dynamics Research, 42(3), 035509.
Lind SJ, Stansby PK, Rogers BD, Lloyd PM, 2015. Numerical predictions of water-air wave slam using incompressible-compressible smoothed particle hydrodynamics.Applied Ocean Research, 49, 57-71.
Lin MC, Ho TY, 1994. Water-entry for a wedge in arbitrary water depth. Engineering Analysis with Boundary Elements, 14(2), 179-185.
Lin MC, Shieh LD, 1997. Simultaneous measurements of water impact on a two-dimensional body. Fluid Dynamics Research, 19(3), 125-148.
Liu X, Xu H, Shao S, Lin P, 2013. An improved incompressible SPH model for simulation of wave-structure interaction.Computers & Fluids, 71, 113-123.
Logvinovich GV, 1973. Hydrodynamics of flows with free boundaries. Naukova Dumka, Kyiv, Ukraine.
Lotfollahi-Yaghin MA, Rastgar M, Ahmadi H, 2012. Slamming induced dynamic response of a floating structure. Journal of Marine Science and Technology, 20(2), 201-209.
Lu CH, He YS, Wu GX, 2000. Coupled analysis of nonlinear-interaction between fluid and structure during impact.Journal of Fluid and Structures, 14, 127-146.
Luo HB, Guedes Soares C, 2012. Review of model tests techniques of local slamming on ships. In:Guedes Soares C, Garbatov Y, Sutulo S, Santos TA (Eds.). Maritime Engineering and Technology, Taylor & Francis, 189-194.
Luo HB, Hu J, Guedes Soares C, 2010. Numerical simulation of hydroelastic responses of flat stiffened panels under slamming loads. ASME 2010 29th International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 373-381.
Luo HB, Wang H, Guedes Soares C, 2011a. Comparative study of hydroelastic impact for one free-drop wedge with stiffened panels by experimental and explicit finite element methods.
ASME 2011 30th International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 119-127.
Luo HB, Wang S, Guedes Soares C, 2011b. Numerical prediction of slamming loads on a rigid wedge subjected to water entry using an explicit finite element method. In:Guedes Soares C, Fricke W (Eds). Advances in Marine Structures, Taylor & Francis, UK, 41-47.
Luo HB, Wang H, Guedes Soares C, 2012. Numerical and experimental study of hydrodynamic impact and elastic response of one free-drop wedge with stiffened panels. Ocean Engineering, 40, 1-14.
Luo HB, Zhao Z, Xie P, Wu H, Li X, 2014. Experimental and numerical investigation on hydroelastic impact of one free-drop wedge with aluminum stiffened panels. IEEE OCEANS, Taipei, China, 1-7.
Lv J, Grenestedt JL, 2015. Analytical study of the responses of bottom panels to slamming loads. Ocean Engineering, 94, 116-125.
Magoga TF, Aksu S, Cannon S, Ojeda R, Thomas G, 2014.Identification of slam events experienced by a high-speed craft.Safety & Reliability of Ships, Offshore & Subsea Structures International Conference, Scotland, UK, 1-13.
Maki KJ, Lee D, Troesch A, Vlahopoulos N, 2011. Hydroelastic impact of a wedge-shaped body. Ocean Engineering, 38, 621-629.
Marine Accident Investigation Branch (MAIB). 2008 Report on the investigation of the structural failure of MSC Napoli, English Channel on 18 January 2007. MAIB report No. 9/2008.
Southampton, UK.Matsubara S, 2011. Ship motions and wave-induced loads on high speed catamarans. PhD thesis, Australian Maritime College.
Mei XM, Liu YM, Yue DK, 1999. On the water impact of general two-dimensional sections. Applied Ocean Research, 21, 1-15.
Molin B, Korobkin AA, 2001. Water entry of a perforated wedge.Proc. 16th Int. workshop on water waves and floating bodies, Japan, 121-124
Molteni D, Colagrossi A, Colicchio G, 2007. On the use of an alternative water state equation in SPH. Proc. SPHERIC, 2nd International Workshop, Universidad Politécnica de Madrid, Spain.
Monaghan JJ, 1988. An introduction to SPH. Computer Physics Communications, 48(1), 89-96.
Monaghan JJ, 1992. Smoothed particle hydrodynamics. Annual Review of Astronomy and Astrophysics, 30, 543-574.
Mousaviraad SM, Wang Z, Stern F, 2015. URANS studies of hydrodynamic performance and slamming loads on high-speed planning hulls in calm water and waves for deep and shallow conditions. Applied Ocean Research, 51, 222-240.
Murai Y, Nakada T, Suzuki T, Yamamoto F, 2007. Particle tracking velocimetry applied to estimate the pressure field around a savonius turbine. Measurement Science and Technology, 18(8), 2491-2503.
Nila A, Vanlanduit S, Vepa S, Van Paepegem W, 2013. A PIV-based method for estimating slamming loads during water entry of rigid bodies. Measurement Science and Technology, 24(4), 436-475.
Oberhagemann J, el Moctar O, 2011, Numerical and experimental investigations of whipping and springing of ship structures. In:The Twenty-first International Offshore and Polar Engineering Conference. International Society of Offshore and Polar Engineers.
Oberhagemann J, Holtmann M, el Moctar O, Schellin TE, Kim D, 2009. Stern slamming of a LNG carrier. Journal of Offshore Mechanics and Arctic Engineering, 131, 013303-1.
Oberhagemann J, el Moctar O, Holtmann M, Schellin T, Bertram V, Kim DW, 2010. Hydro-elastic simulation of stern slamming and whipping. The International Journal of Ocean and Climate Systems, 1(3/4), 179-188.
Ochi MK, 1964a. Prediction of occurrence and severity of ship slamming at sea. 5th Symp. Naval Hydrodynamics, Bergen.
Ochi MK, 1964b. Extreme behavior of a ship in rough seas:Slamming and shipping of green water. SNAME Annual Meeting, New York.
Ochi MK, Motter LE, 1973. Prediction of slamming characteristics and hull response for ship design. Transactions SNAME, 81, 144-190.
Oger G, Doring M, Alessandrini B, Ferrant P, 2006.Two-dimensional SPH simulations of wedge water entries.Journal of Computational Physics, 213(2), 803-822.
Ogilvie TF, 1963. Compressibility effects in ship slamming.Schiffstechnik, 10, 147-154.
Panciroli R, 2013. Water entry of flexible wedges:some issues on the FSI phenomena. Applied Ocean Research, 39, 72-74.
Panciroli R, Abrate S, Minak G, Zucchelli A, 2012. Hydroelasticity in water-entry problems:Comparison between experimental and SPH results. Composite Structures, 94(2), 532-539
Panciroli R, Porfiri M, 2013. Evaluation of the pressure field on a rigid body entering a quiescent fluid through particle image velocimetry. Experiments in Fluids, 54(12), 1-13.
Panciroli R, Porfiri M, 2015. Analysis of hydroelastic slamming through particle image velocimetry. Journal of Sound and Vibration, 347, 63-78.
Panciroli R, Shams A, Porfiri M, 2015a. Experiments on the water entry of curved wedges:high speed imaging and particle image velocimetry. Ocean Engineering, 94, 213-222.
Panciroli R, Ubertini S, Minak G, Jannelli E, 2015b. Experiments on the dynamics of flexible cylindrical shells impacting on a water surface. Experimental Mechanics, 55(8), 1537-1550.
Paik Kwang-jun, Carrica PM, Lee D, Maki K, 2009. Strongly coupled fluid-structure interaction method for structural loads on surface ships. Ocean Engineering, 36, 1346-1357.
Peseux B, Gornet L, Donguy B, 2005. Hydrodynamic impact:numerical and experimental investigations. Journal of Fluids and Structures, 21(3), 277-303.
Phan TS, Temarel P, 2002. Hydroelastic responses of pontoon and semi-submersible types of very large floating structure in regular head waves. Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering, paper OMAE2002-28149, 753-763.
Price WG, Wu YS, 1985. Structural responses of a SWATH of multi-hulled vessel traveling in waves. International Conference on SWATH ships and advanced multi-hulled vessels.Royal Institution of Naval Architects, London.
Psaraftis HN, 1978. Some new aspects of slamming probability theory. Journal of Ship Research, 22(3), 186-192.
Qin H, Zhao L, Shen J, 2011. A modified Logvinovich model for hydrodynamic loads on an asymmetric wedge entering water with a roll motion. Journal of Marine Science and Application, 10(2), 184-189.
Qin Z, Batra RC, 2009. Local slamming impact of sandwich composite hulls. International Journal of Solids and Structures, 46(10), 2011-2035.
Rajendran S, Fonseca N, Guedes Soares C, 2015. Simplified body nonlinear time domain calculation of vertical ship motions and wave loads in large amplitude waves. Ocean Engineering, 107:157-177.
Rajendran S, Fonseca N, Guedes Soares C, 2016. Body nonlinear time domain calculation of vertical ship responses in extreme seas accounting for 2nd order Froude-Krylov pressure. Applied Ocean Research, 54:39-52.
Ramos J, Incecik A, Guedes Soares C, 2000. Experimental study of slam-induced stresses in a container ship. Marine Structure, 13(1), 25-52.
Santoro N, Begovic E, Bertorello C, Bove A, De Rosa S, Franco F, 2014. Experimental study of the hydrodynamic loads on high speed planning craft. Procedia Engineering, 88, 186-193.
Santos FM, Casetta L, Pesce CP, 2013. Application of a variational method to the vertical hydrodynamic impact of axisymmetric bodies. Applied Ocean Research, 39, 75-82.
Santos FM, Temarel PA, Guedes Soares C, 2009. On the limitations of two and three-dimensional linear hydroelasticity analyses applied to a fast patrol boat. Journal of Engineering for the Maritime Environment, 223(3), 457-478.
Santos FM, Temarel P, Guedes Soares C, 2009. Modal analysis of a fast patrol boat made of composite material. Ocean Engineering, 36(2), 179-192.
Savander BR, Scorpio SM, Taylor RK, 2002. Steady hydrodynamic analysis of planing surfaces. Journal of Ship Research, 46, 248-279.
Schellin TE, el Moctar O, 2007. Numerical prediction of impact-related wave loads on ships. Journal of Offshore Mechanics and Arctic Engineering, 129(1), 39-47.
Schiffman M, Spencer DC, 1951. The force of impact on a cone striking a water surface vertical entry. Communications on Pure and Applied Mathematics, 4, 379-417.
Scolan YM, 2004. Hydroelastic behaviour of a conical shell impacting on a quiescent-free surface of an incompressible liquid. Journal of Sound and Vibration, 277(1/2), 163-203.
Scolan YM, Korobkin AA, 2001. Three-dimensional theory of water impact. Part 1. Inverse Wagner problem. Journal of Fluid Mechanics, 440, 293-326.
Seng S, Jensen JJ, Malenica S, 2014. Global hydroelastic model for springing and whipping based on a free-surface CFD code(OpenFOAM). International Journal of Naval Architecture and Ocean Engineering, 6(4), 1024-1040.
Senjanovic I, Catipovic I, Tomasevic S, 2007. Coupled flexural and torsional vibrations of ship-like girders. Thin-Walled Structures, 45, 1002-1021.
Senjanovic I, Malenica S, Tomasevic S, 2008. Investigation of ship hydroelasticity. Ocean Engineering, 35, 523-535.
Senjanovic I, Parunov J, 2001. Slamming and whipping analysis of large container ship. Proceedings of the Eleventh, International Offshore and Polar Engineering Conference, Stavanger, Norway, 17-22.
Shams A, Jalalisendi M, Porfiri M, 2015. Experiments on the water entry of asymmetric wedges using particle image velocimetry.Physics of Fluids, 27(2), 027103.
Shams A, Porfiri M, 2015. Treatment of hydroelastic impact of flexible wedges. Journal of Fluids and Structures, 57, 229-246.
Shao S, 2009. Incompressible SPH simulation of water entry of a free-falling object. International Journal for Numerical Methods in Fluids, 59(1), 91-115.
Souli M, Ouahsine A, Lewin L, 2000. ALE formulation for fluid-structure interaction problems. Computer Methods in Applied Mechanics and Engineering, 190(5), 659-675.
Southall NR, Lee Y, Johnson MC, Hirdaris SE, White NJ, 2014.Towards a pragmatic method for prediction of whipping:wedge impact simulations using OpenFOAM. Proceedings of the 24th International Offshore and Polar Engineering Conference, Busan, Korea.
Stavovy AB, Chuang SL, 1976. Analytical determination of slamming pressures for high speed vessels in waves. Journal of Ship Research, 20, 190-198.
Stenius I, Rosn A, Kuttenkeuler J, 2006. Explicit FE-modeling of fluid-structure interaction in hull-water impacts. International Shipbuilding Progress, 53, 1031-1121.
Stenius I, Rosén A, Battley M, Allen T, 2013. Experimental hydroelastic characterization of slamming loaded marine panels.Ocean Engineering, 74, 1-15.
Stenius I, Rosn A, Kuttenkeuler J, 2007. Explicit FE-modelling of hydroelasticity in panel-water impacts. International Shipbuilding Progress, 54(2/3), 111-127.
Stenius I, Rosn A, Kuttenkeuler J, 2011. Hydroelastic interaction in panel-water impacts of high-speed craft. Ocean Engineering, 38, 371-381.
Sun H, 2007. A boundary element method applied to strongly nonlinear wave-body interaction problems. PhD thesis, Norwegian University of Science and Technology, Trondheim, Norway.
Sun H, Faltinsen OM, 2009. Water entry of a bow flare section with a roll angle. Journal of Marine Science and Technology, 14, 69-79.
Sun H, Faltinsen OM, 2006. Water impact of horizontal circular cylinders and cylindrical shells. Applied Ocean Research, 28(5), 299-311.
Swidan A, Amin W, Ranmuthugala D, Thomas G, Penesis I, 2013.Numerical prediction of symmetric water impact loads on wedge shaped hull form using CFD. World Journal of Mechanics, 3(8), 311.
Swidan A, Thomas G, Ranmuthugala D, Amin W, Penesis I, Allen T, Battley M, 2016. Experimental drop test investigation into wetdeck slamming loads on a generic catamaran hullform.Ocean Engineering, 117, 143-153.
Swidan A, Thomas G, Penesis I, Ranmuthugala D, Amin W, Allen T, Battley M, 2017. Wetdeck slamming loads on a developed catamaran hull form-experimental investigation. Ships and Offshore Structures, 12(5), 653-661.
Tenzer M, Moctar OE, Schellin TE, 2015. Experimental investigation of impact loads during water entry. Ship Technology Research, 62(1), 47-59.
Thomas G, Winkler S, Davis M, 2011. Slam events of high-speed catamarans in irregular waves. Journal of Marine Science and Technology, 16, 8-21.
Tick LJ, 1958. Certain probabilities associated with bow submergence and ship slamming in irregular seas. Journal of Ship Research, 2, 30-36.
Tulin MP, 1957. The theory of slender surfaces planing at high speeds. Schiffstechnik, 4, 125-133.
Tuitman JT, 2010. Hydro-elastic response of ship structures to slamming induced whipping. Ph.D thesis, Delft University of Technology, Delft.
Tveitnes T, Fairlie-Clarke AC, Varyani K, 2008. An experimental investigation into the constant velocity water entry of wedge-shaped sections. Ocean Engineering, 35(14), 1463-1478.
Van Nuffel D, 2014. Experimental study of the slamming induced pressures, forces and deformations of quasi-rigid and deformable bodies during vertical water entry. Ph.D thesis, Ghent University, Ghent.
Van Nuffel D, Vepa KS, De Baere I, Lava P, Kersemans M, Degrieck J, De Rouck J, Van Paepegem W, 2014. A comparison between the experimental and theoretical impact pressures acting on a horizontal quasi-rigid cylinder during vertical water entry. Ocean Engineering, 77, 42-54.
Veen DJ, Gourlay TP, 2011. A 2D smoothed particle hydrodynamics theory for calculating slamming loads on ship hull sections. Royal Institution of Naval Architects. Proceedings of the Innovation in High Speed Marine Vessels, Fremantle.
Veen DJ, Gourlay TP, 2012. A combined strip theory and smoothed particle hydrodynamics approach for estimating slamming loads on a ship in headseas. Ocean Engineering, 43, 64-71.
Verhagen JHG, 1967. The impact of a flat plate on a water surface.Journal of Ship Research, 12, 211-223.
Von Kármàn T, 1929. The impact on seaplane floats during landing.National Advisory Committee for Aeronautics, Technical Note No. 321, 309-313.
Vorus WS, 1996. A flat cylinder theory for vessel impact and steady planing resistance. Journal of Ship Research, 40(2), 89-106.
Wagner H, 1932. Uber Stossund Gleitvergange an der Oberflache von Flussigkeiten. Zeitschrift fuer Angewandte Mathematik und Mechanik, 12, 193-215.
Wang J, Faltinsen OM, 2013. Numerical investigation of air cavity formation during the high-speed vertical water entry of wedges.Journal of Offshore Mechanics and Arctic Engineering, 135(1), 011101.
Wang J, Lugni C, Faltinsen OM, 2015a. Experimental and numerical investigation of a freefall wedge vertically entering the water surface. Applied Ocean Research, 51, 181-203.
Wang J, Lugni C, Faltinsen OM, 2015b. Analysis of loads, motions and cavity dynamics during freefall wedges vertically entering the water surface. Applied Ocean Research, 51, 38-53.
Wang S, 2016. Hydroelastic response of ship structural components subjected to slamming loads. PhD Thesis, Centre for Marine Technology and Ocean Engineering (CENTEC), Instituto Superior Técnico, Universidade de Lisboa, Lisboa, 201-207.
Wang S, Guedes Soares C, 2012. Water impact of symmetric wedges with a multi-material Eulerian formulation.International Journal of Maritime Engineering, 154 (A4),191-206.
Wang S, Guedes Soares C, 2013. Slam induced loads on bow-flared sections with various roll angles. Ocean Engineering, 67, 45-57.
Wang S, Guedes Soares C, 2014a. Asymmetrical water impact of two-dimensional wedges with roll angle. International Journal of Maritime Engineering, 156(A2), 115-130.
Wang S, Guedes Soares C, 2014b. Numerical study on the water impact of 3D bodies by explicit finite element method. Ocean Engineering, 78, 73-88.
Wang S, Guedes Soares C, 2014c. Comparison of simplified approaches and numerical tools to predict the loads on bottom slamming of marine. In:Guedes Soares, C., López Peña F.(Eds.). Developments in Maritime Transportation and Exploitation of Sea Resources, Francis & Taylor Group, London, UK, 157-170.
Wang S, Guedes Soares C, 2014d. Numerical study on hydroelastic water entry of a wedge. In:Guedes Soares C, López Peña F (Eds.). Developments in Maritime Transportation and Exploitation of Sea Resources, Francis & Taylor Group, London, UK, 199-208.
Wang S, Guedes Soares C, 2015. Experimental and numerical study on bottom slamming probability of a chemical tanker subjected to irregular waves. In:Guedes Soares C, Santos TA (Eds.).Maritime Technology and Engineering, Taylor & Francis Group, London, UK, 1065-1072.
Wang S, Guedes Soares C, 2016a. Experimental and numerical study of the slamming load on the bow of a chemical tanker in irregular waves. Ocean Engineering, 111, 369-383.
Wang S, Guedes Soares C, 2016b. Stern slamming of a chemical tanker in irregular seas. Ocean Engineering, 122, 322-332.
Wang S, Guedes Soares C, 2016c. Hydroelastic vibration of bottom platting subjected to wave impact. In:Guedes Soares C, Santos TA (Eds). Maritime Engineering and Technology 3, Taylor and Francis, 1, 401-407.
Wang S, Karmakar D, Guedes Soares C, 2015. Hydroelastic impact due to longitudinal compression on transient vibration of a horizontal elastic plate. Guedes Soares C, Santos TA (Eds.).Maritime Technology and Engineering, London, UK, 1073-1080.
Wang S, Karmakar D, Guedes Soares C, 2016. Hydroelastic impact of a horizontal floating plate with forward speed. Journal of Fluids and Structures, 60, 97-113.
Wang S, Luo HB, Guedes Soares C, 2012. Explicit FE simulation of slamming load on rigid wedge with various deadrise angles during water entry. Guedes Soares C, et al. (Eds). Maritime Technology and Engineering, Taylor & Francis, UK, 399-406.
Wang S, Luo HB, Guedes Soares C, 2014. Numerical prediction of slamming loads on a bow-flared section during water entry.International Journal of Maritime Engineering, 156, A303-A314.
Wang S, Zhang HD, Guedes Soares C, 2016. Slamming occurrence for a chemical tanker advancing in extreme waves. Ocean Engineering, 119, 135-142.
Wang YW, Wu WG, Guedes Soares C, 2016. Slam induced loads on a 3D bow with various pitch angles. American Society of Mechanical Engineers. ASME 2016 35th International Conference on Ocean, Offshore and Arctic Engineering, V007T06A061-V007T06A061.
Wei Z, Hu C, 2015. Experimental study on water entry of circular cylinders with inclined angles. Journal of Marine Science and Technology, 20(4), 722-738.
Wu G, 2012. Numerical simulation for water entry of a wedge at varying speed by a high order boundary element method.Journal of Marine Science and Application, 11(2), 143-149.
Wu GX, Sun H, He YS, 2004. Numerical simulation and experimental study of water entry of a wedge in free fall motion.Journal of Fluids and Structures, 19(3), 277-289.
Xiao J, Batra R, 2016. Local water slamming of curved rigid hulls.Multiphysics, 6(3), 305-339.
Xu GD, Duan WY, 2009. Review of prediction techniques on hydrodynamic impact of ships. Journal of Marine Science and Application, 8(3), 204-210.
Xu GD, Duan WY, Wu GX, 2008. Numerical simulation of oblique water entry of an asymmetrical wedge. Ocean Engineering, 35, 1597-1603.
Xu GD, Duan WY, Wu GX, 2011. Numerical simulation of water entry of a cone in free-fall motion. The Quarterly Journal of Mechanics and Applied Mathematics, 64(3), 265-285.
Xu L, Troesch AW, Peterson R, 1999. Asymmetric hydrodynamic impact and dynamic response of vessels. Journal of Offshore Mechanics and Arctic Engineering, 121(2), 83-89.
Xu L, Troesch AW, Vorus WS, 1998. Asymmetric vessel impact and planning hydrodynamics. Journal of Ship Research, 42, 187-198.
Yamamoto Y, Ohtsubo H, Okada S, Sawada M, Murakami T, 1983.Cushioning action for horizontal water impact of a flat plate.Journal of the Society of Naval Architects of Japan, 235-242.
Yettou EM, Desrochers A, Champoux Y, 2006. Experimental study on the water impact of a symmetrical wedge. Fluid Dynamics Research, 38(1), 47-66.
Yettou EM, Desrochers A, Champoux Y, 2007. A new analytical model for pressure estimation of symmetrical water impact of a rigid wedge at variable velocities. Journal of Fluids and Structures, 23(3), 501-522.
Zarnick EE, Hong YS,1986. Relative bow motion and frequency of slamming of SWATH cross-structure. Report No.DTNSRDC/spd-1174-01. David W Taylor Naval Ship Research and Development Center, Bethesda, MD.
Zhang HD, Cherneva Z, Guedes Soares C, Onorato M, 2014a.Modeling extreme wave heights from laboratory experiments with the nonlinear Schrödinger equation. Nat. Hazards Earth Syst. Sci., 14, 959-968.
Zhang HD, Guedes Soares C, Onorato M, 2014b. Modelling of the spatial evolution of extreme laboratory wave heights with the nonlinear Schrödinger and Dysthe equations. Ocean Engineering, 89, 1-9.
Zhang HD, Guedes Soares C, Onorato M, 2015. Modelling of the spatial evolution of extreme laboratory wave crest and trough heights with the NLS-Type equations. Applied Ocean Research, 52, 140-150.
Zhang HD, Guedes Soares C, Onorato M, Toffoli A, 2016.Modelling of the temporal and spatial evolutions of weakly nonlinear random directional waves with the modified nonlinear Schrödinger equations. Applied Ocean Research, 55, 130-140.
Zhao R, Faltinsen OM, 1993. Water entry of two-dimensional bodies. Journal of Fluid Mechanics, 246, 593-612.
Zhao R, Faltinsen OM, Aarsnes JV, 1996. Water entry of arbitrary two-dimensional sections with and without flow separation.Proceedings of the 21st Symposium on Naval Hydrodynamics, 408-423.
Zhao Y, Chen HC, Yu X, 2015. Numerical simulation of wave slamming on 3D offshore platform deck using a coupled Level-Set and Volume-of-Fluid method for overset grid system.Ocean Systems Engineering, 5(4), 245-259.

Memo

Memo:
Received date:2017-06-12;Accepted date:2017-10-14。
Foundation item:Supported by Portuguese Foundation for Science and Technology (Fundação para a Ciência e Tecnologia-FCT)
Corresponding author:Shan Wang,Email:shan.wang@centec.tecnico.ulisboa.pt
Last Update: 2017-12-02