«Previous Article|Table of Contents|Next Article»

Citation:
　Minhui Gu,Kui Tang,Lingquan Kong,et al.Effects of Intervening Water Layers on the Penetration Performance of Underwater Shaped Charge Jets[J].Journal of Marine Science and Application,2026,(5):1176-1195.[doi:10.1007/s11804-025-00738-w]
Click and Copy

Effects of Intervening Water Layers on the Penetration Performance of Underwater Shaped Charge Jets

Info

Title:: Effects of Intervening Water Layers on the Penetration Performance of Underwater Shaped Charge Jets

Author(s):: Minhui Gu; Kui Tang; Lingquan Kong; Jingwen Xia; Yangchen Gu; Yuanbo Li; Jinxiang Wang

Affilations:

Keywords:: Underwater shaped charge jet; Water layer; Initiation manner; Standoff distance; Penetration performance

DOI:: 10.1007/s11804-025-00738-w

Abstract:: The penetration performance of an underwater shaped charge jet (USCJ) under the influence of an intervening water layer was studied by combining experimental and numerical simulation methods, considering the effects of initiation manners and standoff distance. First, the USCJ formation and its penetration performance tests were carried out, which were used to verify the reliability of the numerical simulation. Then, the formation and penetration processes of the shaped charge jet were analyzed experimentally and numerically. The results showed that during the penetration of the intervening water layer, the high-speed and high-energy jet head was engulfed by the water layer. A 30 mm intervening water layer reduces the kinetic energy of USCJ by approximately 13.6% and its penetration performance by 12.8%. The depth of penetration (DOP) of the USCJ decreases with increasing water layer thickness, and its decreasing trend gradually slows down. The DOPs of USCJ under annular and surface initiation manners are greater than those under central initiation. When the annular initiation radius increases, the accumulation effect of the USCJ weakens, and the overall velocity and kinetic energy increase, resulting in a significant increase in DOP. The DOP of USCJ increases initially and then decreases with an increase in the standoff distance; however, an increase in the water layer thickness reduces the optimal standoff distance. While the water layer reduces DOP, it also has a certain effect on the standoff distance. A certain thickness of the water layer is beneficial for the improvement of the DOP when the standoff distance is small.

References:

[1] Bardiani J, Lomazzi L, Sbarufatti C, Manes A (2025) A machine learning-based tool to correlate coupled and uncoupled numerical simulations for submerged plates subjected to underwater explosions. Journal of Marine Science and Application. https://doi.org/10.1007/s11804-025-00624-5
[2] Cao JZ, Liang LH (2001) Demonstration of numerically simulating figures for underwater explosions. Proceedings of the 24th International Congress on High-Speed Photography and Photonics, Sendai, Japan, 4183. https://doi.org/10.1117/12.424347
[3] Chen X, Lu YG (2024) Research on the influences of motion characteristics of jetting projectile charge under water. Defence Technology 33: 411-425. https://doi.org/10.1016/j.dt.2023.07.009
[4] Fuhs AE, Buck JA, Hallenbeck AE, Strott JB (2010) Metal combustion in steam. Naval Engineers Journal 97(3): 65-79. https://doi.org/10.1111/j.1559-3584.1985.tb01322.x
[5] Gu YC, Wang JX, Li H, Liu LT, Tang K, Ma T, Lin SJ (2023) Comparative study on the forming characteristics and penetration effects of shaped charge jet in water and air. Journal of Applied Physics 133(11): 115901. https://doi.org/10.1063/5.0139683
[6] Gu YC, Wang JX, Li H, Tang K, Liu LT (2022) Formation characteristics and penetration performance of an underwater shaped charge jet. Ocean Engineering 258: 111695. https://doi.org/10.1016/j.oceaneng.2022.111695
[7] Guo M, Zu XD, Shen XJ, Huang ZX (2019) Study on liquid-filled structure target with shaped charge vertical penetration. Defence Technology 15(6): 861-867. https://doi.org/10.1016/j.dt.2019. 05.003
[8] Guo ZT, Chen T, Mu ZC, Zhang W (2020) An investigation into container constraint effects on the cavity characteristics due to high-speed projectile water entry. Ocean Engineering 210: 107449. https://doi.org/10.1016/j.oceaneng.2020.107449
[9] Held M (1987) Refined shaped charge jet penetration measurement in various materials. Proceedings of 10th International Symposium on Ballistics, 1-8
[10] Held M (1995) Verification of the equation for radial crater growth by shaped charge jet penetration. International Journal of Impact Engineering 17(1-3): 387-398. https://doi.org/10.1016/0734-743X(95)99864-N
[11] Held M, Backofen JE (1990) Penetration of shaped charge into water. 12th International Symposium on Ballistics, San Antonio, 30-40
[12] Held M, Huang NS, Jiang D, Chang CC (1996) Determination of the crater radius as a function of time of a shaped charge jet that penetrates water. Propellants Explosives Pyrotechnics 21(2): 64-69. https://doi.org/10.1002/prep.19960210203
[13] Holmquist TJ, Templeton DW, Bishnoi KD (2001) Constitutive modeling of aluminum nitride for large strain, high-strain rate, and high-pressure applications. International Journal of Impact Engineering 25(3): 211-231. https://doi.org/10.1016/S0734-743X(00)00046-4
[14] Hussain G, Hameed A, Hetherington JG, Malik AQ, Sanaullah K (2013) The explosively formed projectile (EFP) as a standoff sea mine neutralization device. Journal of Energetic Materials 31(2): 100-114. https://doi.org/10.1080/07370652.2011.587862
[15] Lam C, Mcqueen D (1998) Study of the penetration of water by an explosively formed projectile. Defence Science and Technology Organization 21: 19
[16] Lee ES, Oh KH, Song SY (1995) Penetration of particulated shaped-charge jet into water. 21st International Congress on High-Speed Photography & Photonics, 975-981. https://doi.org/10.1117/12.209556
[17] Li L, Han B, He SY, Zhao ZY, Zhang R, Zhang QC, Lu TJ (2019) Shock loading simulation using density-graded metallic foam projectiles. Materials & Design 164: 107546. https://doi.org/10.1016/j.matdes.2018.107546
[18] Li YB, Wang JX, Liu ZT, Tang K, Wang HF, Chen XW (2023) Orthogonal optimization design and experiments on explosively formed projectiles with fins. International Journal of Impact Engineering 173: 104462. https://doi.org/10.1016/j.ijimpeng. 2022.104462
[19] Liu F (2006) The explosively formed penetrator and its engineering damage effects research. PhD thesis, University of Science and Technology of China, Hefei. (in Chinese)
[20] Liu NN, Ren SF, Song DD, Liu LT (2020) Damage research of shaped charge jet on warship broadside. Journal of Ship Mechanics 24(8): 1072-1080. (in Chinese) https://doi.org/10.3969/j.issn.1007-7294.2020.08.012
[21] Ma SX, Li XD, Zhou LW (2025) Experimental and numerical investigation of cavity characteristics in behind-armor liquid-filled containers under shaped charge jet impact. Defence Technology 47: 242-259. https://doi.org/10.1016/j.dt.2024.12.021
[22] Ma T, Wang JX, Liu LT, Li H, Tang K, Gu YC, Zhang YF (2024) Study on structural response of water-back plate under the combined action of shock wave and bubble loads generated by cylindrical charge in deep-water environment. Thin-Walled Structures 194: 111307. https://doi.org/10.1016/j.tws.2023.111307
[23] Qian ZH, Yang TM, Liu MB (2024) An overview of coupled Lagrangian-Eulerian methods for ocean engineering. Journal of Marine Science and Application 23: 366-397. https://doi.org/10.1007/s11804-024-00404-7
[24] Shi J, Huang ZX, Zu XD, Xiao QQ (2022) Experimental and numerical investigation of jet performance based on Johnson-Cook model of liner material. International Journal of Impact Engineering 170: 104343. https://doi.org/10.1016/j.ijimpeng.2022. 104343
[25] Shimamura K, Ootsuka T (2013) Study of water entry of high-speed projectile. Procedia Engineering 58: 232-239. https://doi.org/10.1016/j.proeng.2013.05.027
[26] Steinberg DJ, Cochran SG, Guinan MW (1980) A constitutive model for metals applicable at high-strain rate. Journal of Applied Physics 51(3): 1498-1504. https://doi.org/10.1063/1.327799
[27] Tang K, Wang JX, Liu LT, Yang M (2023) Study on the mechanism of secondary penetration of long rod and its influencing factors. Acta Armamentarii 44(12): 3707-3718. (in Chinese) DOI: 10.12382/bgxb.2023.0035
[28] Tang K, Wang JX, Song HP, Zhou N (2022) Investigation on the penetration of jacketed rods with striking velocities of 0.9-3.3 km/s into semi-infinite targets. Defence Technology 18(3): 476-489. https://doi.org/10.1016/j.dt.2021.03.003
[29] Wang HF, Jiang ZR, Yu WM, Liu ZW (2006) Behavior of jetting penetrator charge operating underwater. Transactions of Beijing Institute of Technology 26(3): 189-192. (in Chinese) https://doi.org/10.15918/j.tbit1001-0645.2006.03.001
[30] Wang YJ, Li WB, Wang XM, Li WB (2017) Numerical simulation and experimental study on flight characteristics and penetration against spaced targets of EFP in water. Chinese Journal of Energetic Materials 25(6): 459-465. (in Chinese) DOI: 10.3969/10.11943/j.issn.1006-9941.2017.06.003
[31] Wu JY, Zhong MS, Liu Y, Xie XB, Ji C (2020) Study on the influencing factors of underwater unexploded ordnance destruction based on shaped charged jet. Journal of Physics: Conference Series 1507(3): 032007. https://doi.org/10.1088/1742-6596/1507/3/032007
[32] Xu LY, Tian Y, Liu XB, Wang SP (2023) Numerical investigation on jet penetration capacity of hypervelocity shaped charge in underwater explosion. Ocean Engineering 281: 114668. https://doi.org/10.1016/j.oceaneng.2023.114668
[33] Yang L, Zhang QM, Ju YY (2009) Experimental study on the penetration of explosively formed projectile against water-partitioned armor. Transactions of Beijing Institute of Technology 29(3): 197-200. (in Chinese) https://doi.org/10.15918/j.tbit1001-0645.2009.03.007
[34] Zhang XR, Wu C, Huang FL (2010) Penetration of shaped charge jets with tungsten-copper and copper liners at the same explosive-to-liner mass ratio into water. Shock Waves 20(3): 263-267. https://doi.org/10.1007/s00193-010-0248-0
[35] Zhang YF, Liu LT, Wang JX, Tang K, Ma T (2022a) Study on the impact characteristics of underwater explosion bubble jets induced by plate structure. Ocean Engineering 266: 112641. https://doi.org/10.1016/j.oceaneng.2022.112641
[36] Zhang ZF, Li HL, Zhang JY, Wang LK, Zhang GY, Zong Z (2024) Characterization of underwater explosive loads of blasting and shaped charges. Journal of Marine Science and Application 23(2): 302-315. https://doi.org/10.1007/s11804-024-00422-5
[37] Zhang ZF, Wang C, Xu WL, Hu HL (2020) Penetration of annular and general jets into underwater plates. Computational Particle Mechanics 8(2): 289-296. https://doi.org/10.1007/s40571-020-00330-9
[38] Zhang ZF, Wang C, Xu WL, Hu HL, Guo YC (2022b) Application of a new type of annular shaped charge in penetration into underwater double-hull structure. International Journal of Impact Engineering 159: 104057. https://doi.org/10.1016/j.ijimpeng.2021.104057
[39] Zhang ZF, Wang LK, Ming FR, Vadim VS, Chen HL (2017a) Application of smoothed particle hydrodynamics in analysis of shaped-charge jet penetration caused by underwater explosion. Ocean Engineering 145: 177-187. https://doi.org/10.1016/j.oceaneng.2017.08.057
[40] Zhang ZF, Wang LK, Vadim VS (2017b) Damage response of steel plate to underwater explosion: Effect of shaped charge liner. International Journal of Impact Engineering 103: 38-49. https://doi.org/10.1016/j.ijimpeng.2017.01.008
[41] Zhang ZF, Yang SX, Zhang SH, Wang LK, Sui YT, Li T, Zhang GY (2025) Experimental study of damage to double-hull structure by underwater explosions of three charge types-blasting, shaped, and linear shaped charges. International Journal of Impact Engineering 203: 105369. https://doi.org/10.1016/j.ijimpeng.2025.105369

Memo

Memo:: Received date:2025-4-30;Accepted date:2025-6-26。<br>Foundation item:This research was funded by National Natural Science foundation of China (Nos. 12372361), and the Fundamental Research Funds for the Central Universities (No. 30924010833).<br>Corresponding author:Kui Tang,E-mail:tkui2014@sina.com

Commonly used function

Tools

Statistics

Viewed4
Downloads2
Comments

Last Update: 2026-11-04