|Table of Contents|

Citation:
 Yanzhuo Xue,Guangshuai Sun,Shaocheng Di.Compressive Behaviors of Ice with Different Strain rates: Multiscale Fracture Characteristics of Strength and Fragmentation[J].Journal of Marine Science and Application,2026,(4):1000-1017.[doi:10.1007/s11804-025-00679-4]
Click and Copy

Compressive Behaviors of Ice with Different Strain rates: Multiscale Fracture Characteristics of Strength and Fragmentation

Info

Title:
Compressive Behaviors of Ice with Different Strain rates: Multiscale Fracture Characteristics of Strength and Fragmentation
Author(s):
Yanzhuo Xue1;  Guangshuai Sun1;  Shaocheng Di1
Affilations:
Author(s):
Yanzhuo Xue1;  Guangshuai Sun1;  Shaocheng Di1
College of Shipbuilding Engineering, Harbin Engineering University, Harbin 150001, China
Keywords:
Strain rate effect; Fragment characteristic; Multiscale fracture; Discrete element method; Grain-based model
分类号:
-
DOI:
10.1007/s11804-025-00679-4
Abstract:
In ice mechanics, the strain rate-dependent properties of ice under uniaxial compression have attracted attention. In this work, the rate-dependent properties of polycrystalline ice are studied through experiments and numerical simulation. For the experimental part, uniaxial compression tests are carried out on polycrystalline ice with different strain rates. For numerical simulation, a discrete element numerical model based on grain is constructed, and the microscopic parameter calibration is completed. Ice compression at different strain rates is simulated by combining the mechanical properties of single-crystal ice and polycrystalline ice, and the simulation and experimental findings are mutually verified. The results show that the uniaxial compressive strength of polycrystalline ice increases exponentially with the strain rate. The ice samples break substantially at a high strain rate, and the average broken area is inversely proportional to the strain rate. In the crack initiation, propagation, and coalescence of polycrystalline ice, intergranular failure is dominant. In terms of crack type, tensile failure is dominant. On the basis of existing studies, a rate-dependent model of the uniaxial compressive strength of polycrystalline ice is proposed.

References:

[1] Carney K, Benson D, DuBois D, Lee R (2006) A phenomenological high strain rate model with failure for ice. International Journal of Solids and Structures 43(25): 7820-7839. https://doi.org/10.1016/j.ijsolstr.2006.04.005
[2] Carter D (1971) Lois et mécanismes de l’apparente fracture fragile de la glace de rivière et du lac
[3] Cole D, Shapiro L, Weeks W, Byers C, Dempsey J, Adamson R, Petrenko V, Gluschenkov V (1995) Overview of Recent Program on Mechanical Properties of Sea Ice. Journal of Cold Regions Engineering 9(4): 219-234. https://doi.org/10.1061/(ASCE)0887-381X(1995)9:4(219)
[4] Cundall P (1971) A computer model for simulating progressive, large-scale movement in blocky rock system. Proceedings of the International Symposium on Rock Mechanics
[5] Cundall P, Strack O (1979) A discrete numerical model for granular assemblies. Geotechnique 29(1): 47-65. https://doi.org/10.1680/geot.1980.30.3.331
[6] Di SC, Xue YZ, Wang Q, Bai XL (2017) Discrete element simulation of ice loads on narrow conical structures. Ocean Engineering 146: 282-297. https://doi.org/10.1016/j.oceaneng.2017.09.033
[7] Gao FQ, Stead D, Elmo D (2016) Numerical simulation of microstructure of brittle rock using a grain-breakable distinct element grain-based model. Computers and Geotechnics 78: 203-217. https://doi.org/10.1016/j.compgeo.2016.05.019
[8] Gribanov I, Taylor R, Sarracino R (2018a) Cohesive zone micromechanical model for compressive and tensile failure of polycrystalline ice. Engineering Fracture Mechanics 196: 142-156. https://doi.org/10.1016/j.engfracmech.2018.04.023
[9] Gribanov I, Taylor R, Sarracino R (2018b) Application of cohesive zone model to the fracture process of freshwater polycrystalline ice under flexural loading. in IOP Conference Series: Earth and Environmental Science. IOP Publishing. https://doi.org/10.1088/1755-1315/193/1/012013
[10] Hawkes I, Mellor M (1972) Deformation and fracture of ice under uniaxial stress. Journal of Glaciology 11(61): 103-131. https://doi.org/10.3189/s002214300002253x
[11] Ji SY, Chen XD, Wang AL (2020) Influence of the loading direction on the uniaxial compressive strength of sea ice based on field measurements. Annals of Glaciology 61(82): 86-96. https://doi.org/1017/aog.2020.14
[12] Jones S (1997) High Strain-Rate Compression Tests on Ice. The Journal of Physical Chemistry B 101(32): 6099-6101. https://doi.org/10.1021/jp963162j
[13] Kim H, Keune J (2007) Compressive strength of ice at impact strain rates. Journal of Materials Science 42(8): 2802-2806. https://doi.org/10.1007/s10853-006-1376-x
[14] Lan HX, Martin C, Hu B (2010) Effect of heterogeneity of brittle rock on micromechanical extensile behavior during compression loading. Journal of Geophysical Research: Solid Earth 115(B1). https://doi.org/10.1029/2009JB006496
[15] Li JB, Wang CY, Wang Q, Zhang YH, Jing CY, Han DF (2023) Peridynamic modeling of polycrystalline S2 ice and its applications. Engineering Fracture Mechanics 277: 108941. https://doi.org/10.1016/j.engfracmech.2022.108941
[16] Li XF, Li HB, Zhao J (2021) Transgranular fracturing of crystalline rocks and its influence on rock strengths: Insights from a grain-scale continuum–discontinuum approach. Computer Methods in Applied Mechanics and Engineering 373: 113462. https://doi.org/10.1016/j.cma.2020.113462
[17] Li XF, Li X, Li HB, Zhang QB, Zhao J (2018) Dynamic tensile behaviours of heterogeneous rocks: the grain scale fracturing characteristics on strength and fragmentation. International Journal of Impact Engineering 118: 98-118. https://doi.org/10.1016/j.ijimpeng.2018.04.006
[18] Li ZJ, Zhang LM, Lu P, Leppäranta M, Li GW (2011) Experimental study on the effect of porosity on the uniaxial compressive strength of sea ice in Bohai Sea. Science China Technological Sciences 54(9): 2429-2436. https://doi.org/10.1007/s11431-011-4482-1
[19] Liu RW, Xue YZ, Li SF (2023) A general finite deformation hypoelastic-plasticity non-ordinary state-based peridynamics model and its applications. Engineering with Computers 40: 1-20. https://doi.org/10.1007/s00366-023-01792-0
[20] Liu RW, Xue YZ, Han DF, Ni BY (2021) Studies on model-scale ice using micro-potential-based peridynamics. Ocean Engineering 221: 108504. https://doi.org/10.1016/j.oceaneng.2020.108504
[21] Lu WJ, Hans-Martin Heyn, Raed Lubbad, Sveinung Løset (2018) A large scale simulation of floe-ice fractures and validation against full-scale scenario. International Journal of Naval Architecture and Ocean Engineering 10(3): 393-402. https://doi.org/10.1016/j.ijnaoe.2018.02.006
[22] Lu W, Li MY, Vazic B, Oterkus S, Oterkus E, Wang Q (2020) Peridynamic modelling of fracture in polycrystalline ice. Journal of Mechanics 36(2): 223-234. https://doi.org/10.1017/jmech. 2019.61
[23] Ni BY, Han DF, Di SC, Xue YZ (2020) On the development of ice-water-structure interaction. Journal of Hydrodynamics 32(4): 629-652. https://doi.org/10.1007/s42241-020-0047-8
[24] Peng J, Wong L, Teh C (2017) Influence of grain size heterogeneity on strength and microcracking behavior of crystalline rocks. Journal of Geophysical Research: Solid Earth 122(2): 1054-1073. https://doi.org/10.1002/2016JB013469
[25] Peng J, Wong L, Teh C (2018a) A re-examination of slenderness ratio effect on rock strength: Insights from DEM grain-based modelling. Engineering Geology 246: 245-254. https://doi.org/10.1016/j.enggeo.2018.10.003
[26] Peng J, Wong L, Teh C, Li ZH (2018b) Modeling micro-cracking behavior of Bukit Timah granite using grain-based model. Rock mechanics and rock engineering 51(1): 135-154. https://doi.org/10.1007/s00603-017-1316-x
[27] Prasanna M, Polojärvi A, Wei MD, Åström J (2022) Modeling ice block failure within drift ice and ice rubble. Physical Review E 105: 045001. https://doi.org/10.1103/PhysRevE.105.045001
[28] Qu TM, Feng YT, Wang M, Jiang SQ (2020) Calibration of parallel bond parameters in bonded particle models via physics-informed adaptive moment optimisation. Powder Technology 366: 527-536. https://doi.org/10.1016/j.powtec.2020.02.077
[29] Qu TM, Feng YT, Zhao JD (2022) A strain energy-based elastic parameter calibration method for lattice/bonded particle modelling of solid materials. Powder Technology 410: 117860. https://doi.org/10.1016/j.powtec.2022.117860
[30] Qu TM, Feng YT, Zhao TT, Wang M (2019) Calibration of linear contact stiffnesses in discrete element models using a hybrid analytical-computational framework. Powder Technology 356: 795-807. https://doi.org/10.1016/j.powtec.2019.09.016
[31] Schulson E, Gratz E (1999) The brittle compressive failure of orthotropic ice under triaxial loading. Acta Materialia 47(3): 745-755. https://doi.org/10.1016/S1359-6454(98)00410-8
[32] Schulson E, Lim P, Lee R (1984) A brittle to ductile transition in ice under tension. Philosophical Magazine A 49(3): 353-363. https://doi.org//10.1080/01418618408233279
[33] Schulson E (1997) The brittle failure of ice under compression. The Journal of Physical Chemistry B 101(32): 6254-6258. https://doi.org/10.1021/jp9632192
[34] Schulson E (2001) Brittle failure of ice. Engineering fracture mechanics 68(17-18): 1839-1887. https://doi.org/10.1016/S0013-7944(01)00037-6
[35] Schulson E (2009) Creep and fracture of ice. Cambridge university press. https://doi.org/10.1017/CBO9780511581397
[36] Schulson E, Gratz E (2009) The brittle compressive failure of orthotropic ice under triaxial loading. Acta Materialia 47(3): 745-755. https://doi.org/10.1016/S1359-6454(98)00410-8
[37] Schulson E (1990) The Brittle Compressive Fracture of ice. Acta Metallurgica et Materialia 38(10): 1963-1976. https://doi.org/10.1016/0956-7151(90)90308-4
[38] Shazly M, Prakash V, Lerch B (2009) High strain-rate behavior of ice under uniaxial compression. International Journal of Solids and Structures 46(6): 1499-1515. https://doi.org/10.1016/j.ijsolstr. 2008.11.020
[39] Shafrova S, Høyland K (2008) The freeze-bond strength in first-year ice ridges. Small-scale field and laboratory experiments. Cold Regions Science and Technology 54(1): 54-71. https://doi.org/10.1016/j.coldregions.2007.11.005
[40] Sun GS, Di SC, Feng YT, Xue YZ (2023) Modelling the fracture behaviour of polycrystalline columnar ice using the grain-based discrete element method. Computational Particle Mechanics 10: 1877-1894. https://doi.org/10.1007/s40571-023-00595-w
[41] Taylor R, Jordaan I (2015) Probabilistic fracture mechanics analysis of spalling during edge indentation in ice. Engineering Fracture Mechanics 134: 242-266. https://doi.org/10.1016/j.engfracmech. 2014.10.021
[42] Timco G, Weeks W (2010) A review of the engineering properties of sea ice. Cold regions science and technology 60(2): 107-129. https://doi.org/10.1016/j.coldregions.2009.10.003
[43] Timco G, Frederking R (1986) Confined compression tests: outlining the failure envelope of columnar sea ice. Cold Regions Science and Technology 12(1): 13-28. https://doi.org/10.1016/0165-232X(86)90016-9
[44] Yuan GY, Ni BY, Wu QG, Xue YZ, Han DF (2022) Ice breaking by a high-speed water jet impact. Journal of Fluid Mechanics 934: A1. https://doi.org/10.1017/jfm.2021.999
[45] Zhang LM, Li ZJ, Jia Q, Li GW, Huang WF (2011) Uniaxial Compressive Strengths of Artificial Freshwater Ice. Advanced Materials Research 243-249: 4634-4637. https://doi.org/10.4028/www.scientific.net/AMR.243-249.4634
[46] Zhang YH, Wang Q, Han DF, Xue YZ, Lu SC, Wang PG (2020) Dynamic splitting tensile behaviours of distilled-water and river-water ice using a modified SHPB setup. International Journal of Impact Engineering 145: 103686. https://doi.org/10.1016/j.ijimpeng. 2020.103686
[47] Zhang YH, Wang Q, Han DF, Xue YZ, Qu J, Yao HQ (2021a) Experimental study of the quasi-static and dynamic fracture toughness of freshwater ice using notched semi-circular bend method. Engineering Fracture Mechanics 247: 107696. https://doi.org/10.1016/j.engfracmech.2021.107696
[48] Zhang YD, Li ZJ, Xiu YR, Li CJ, Zhang BS, Deng Y (2021b) Microstructural characteristics of frazil particles and the physical properties of frazil ice in the yellow river, China. Crystals 11(6): 617. https://doi.org/10.3390/cryst11060617

Memo

Memo:
Received date:2025-4-6;Accepted date:2025-5-9。<br>Foundation item:Funding This work is supported by the National Key Research and Development Program of China (2021YFC2803400), the National Natural Science Foundation of China (Nos. 52192690, 52192693, 52371270, 52401420, 52401318 and 52350410468), and the Natural Science Foundation of Heilongjiang Province (JJ2021TD0031), to which the authors are most grateful.<br>Corresponding author:Yanzhuo Xue,E-mail:xueyanzhuo@hrbeu.edu.cn
Last Update: 2026-10-16