|Table of Contents|

Citation:
　V. Piscopo,A. Scamardella.Incidence of Pitting Corrosion Wastage on the Hull Girder Ultimate Strength[J].Journal of Marine Science and Application,2021,(3):477-490.[doi:10.1007/s11804-021-00218-x]
Click and Copy

Incidence of Pitting Corrosion Wastage on the Hull Girder Ultimate Strength

Info

Title:
Incidence of Pitting Corrosion Wastage on the Hull Girder Ultimate Strength
Author(s):
V. Piscopo;  A. Scamardella
Affilations:
Author(s):
V. Piscopo;  A. Scamardella
Department of Science and Technology, The University of Naples “Parthenope”, Centro Direzionale Isola C4, 80143, Naples, Italy
Keywords:
Hull girder ultimate strength|Pitting corrosion wastage|Ultimate strength of pitted platings|Modified incremental-iterative method|Non-linear FE analysis|Benchmark study|ISSC bulk carrier
分类号:
-
DOI:
10.1007/s11804-021-00218-x
Abstract:
The paper focuses on the assessment of the hull girder ultimate strength, combined with random pitting corrosion wastage, by the incremental-iterative method. After a brief review about the state of art, the local ultimate strength of pitted platings under uniaxial compression is preliminarily outlined and subsequently a closed-form design formula is endorsed in the Rule incremental-iterative method, to account for pitting corrosion wastage in the hull girder ultimate strength check. The ISSC bulk carrier is assumed as reference ship in a benchmark study, devoted to test the effectiveness of the incremental-iterative method, by a comparative analysis with a set of FE simulations, performed by Ansys Mechanical APDL. Four reference cases, with different locations of pitting corrosion wastage, are investigated focusing on nine combinations of pitting and corrosion intensity degrees. Finally, a comparative analysis between the hull girder ultimate strength, combined with pitting corrosion wastage, and the relevant values, complying with the Rule net scantling approach, is performed. Based on current results, the modified incremental-iterative method allows efficiently assessing the hull girder ultimate strength, combined with pitting corrosion wastage, so revealing useful both in the design process of new vessels and in the structural health monitoring of aged ships.

References:

Amlashi HKK, Moan T (2008) Ultimate strength analysis of a bulk carrier hull girder under alternate hold loading condition-a case study Part 1: nonlinear finite element modelling and ultimate hull girder capacity. Mar Struct 21:327-352. https://doi.org/10.1016/j.marstruc.2007.12.006
Amlashi HKK, Moan T (2009) Ultimate strength analysis of a bulk carrier hull girder under alternate hold loading condition, Part 2: stress distribution in the double bottom and simplified approaches. Mar Struct 22:522-544. https://doi.org/10.1016/j.marstruc.2008.12.005
Ansys (2020) User manual of Ansys Mechanical APDL, Release 2020 R2
Campanile A, Piscopo V, Scamardella A (2014) Statistical properties of bulk carrier longitudinal strength. Mar Struct 39:438-462. https://doi.org/10.1016/j.marstruc.2014.10.007
Campanile A, Piscopo V, Scamardella A (2015) Statistical properties of bulk carrier residual strength. Ocean Eng 106:46-67. https://doi.org/10.1016/j.oceaneng.2015.06.060
Chapkis DT (1967) Simulation of pitting corrosion of hull plating under static loading. Trudy TSNⅡMF 82:34-50
DnV (2014) Allowable thickness diminution for hull structure. Classification Note 72.1
Faulkner D (1975) A review of effective plating for use in the analysis of stiffened plating in bending and compression. J Ship Res 19(1):1-17
Frankland JM (1940) The strength of ship plating under edge compression. David Taylor Model Basin Report 469
Gordo JM (2017) Compressive strength of double-bottom under alternate hold loading condition. Guedes Soares and Garbatov (Eds). Progress in the Analysis and Design of Marine Structures: 253-261
Guedes Soares C, Garbatov Y (1999) Reliability of maintained corrosion protected plates subjected to non-linear corrosion and compressive loads. Mar Struct 12:425-445. https://doi.org/10.1016/S0951-8339(99)00028-3
Herring LC, Titcomb AN (1981) Investigation of internal corrosion and corrosion-control alternatives in commercial tankships. Ship Structure Committee Report SSC-312
IACS (2006a) Common Structural Rules for Bulk Carriers. International Association of Classification Societies. London, UK
IACS (2006b) Common structural rules for oil tankers. International Association of Classification Societies. London, UK
IACS (2020) Common structural rules for bulk carriers and oil tankers. International Association of Classification Societies. London, UK
ISSC (2000) Ultimate hull girder strength. Report of the Special Task Committee VI.2. Proceedings of the 14th International Ship and Offshore Structures Congress, Nagasaki, Japan
ISSC (2012) Ultimate hull girder strength. Report of the Special Task Committee Ⅲ.1. Proceedings of the 18th International Ship and Offshore Structures Congress, Rostock, Germany
Jiang X, Guedes Soares C (2012) Ultimate capacity of rectangular plates with partial depth pits under uniaxial loads. Mar Struct 26:27-41. https://doi.org/10.1016/j.marstruc.2011.12.005
Kefal A, Mayang JB, Oterkus E, Yildiz M (2018) Three-dimensional shape and stress monitoring of bulk carriers based on iFEM methodology. Ocean Eng 147:256-267. https://doi.org/10.1016/j.oceaneng.2017.10.040
Khedmati MR, Nouri ZHM, Roshanal MM (2012) A comparative computational investigation on the effects of randomly distributed general corrosion on the post-buckling behaviour of uniaxially loaded plates. J Mech Sci Technol 26(3):767-783. https://doi.org/10.1007/s12206-011-1222-1
Nouri ZHM, Khedmati MR, Sadeghifard S (2012) An effective thickness proposal for strength evaluation of one side pitted steel plates under uniaxial compression. Lat Am J Solids Struct 9:475-496. https://doi.org/10.1590/S1679-78252012000400004
Paik JK, Wang G, Thayamballi AK, Lee JM, Park Y (2003a) Time-variant ultimate longitudinal strength of corroded bulk carriers. Mar Struct 16:567-600. https://doi.org/10.1016/j.marstruc.2004.01.003
Paik JK, Wang G, Thayamballi AK, Lee JM, Park Y (2003b) Time-dependent risk assessment of ageing ships accounting for general/pit corrosion, fatigue cracking and local dent damage. Proceedings of the Annual SNAME Meeting, San Francisco (USA)
Paik JK, Thayamballi AK (2006) Ultimate Limit State Design of Steel-Plated Structures. John Wiley & Sons, Chichester, UK
Paik JK, Kim BJ, Seo JK (2008) Methods for ultimate limit state assessment of ships and ship-shaped offshore structures: Part Ⅲ hull girders. Ocean Eng 35:281-286. https://doi.org/10.1016/j.oceaneng.2007.08.008
Piscopo V, Scamardella A (2018) Towards a unified formulation for the ultimate strength assessment of uncorroded and pitted platings under uniaxial compression. Ocean Eng 169:70-86. https://doi.org/10.1016/j.oceaneng.2018.08.042
Piscopo V, Scamardella A (2019) Sensitivity analysis of hull girder reliability in intact condition based on different load combination methods. Mar Struct 64:18-34. https://doi.org/10.1016/j.marstruc.2018.10.009
Piscopo V, Scamardella A (2020) Ultimate strength assessment of intact and pitted platings under biaxial compression. Eng Struct 204(11079):1-17. https://doi.org/10.1016/j.engstruct.2019.110079
Rahbar-Ranji A, Niamir N, Zarookian A (2015) Ultimate strength of stiffened plates with pitting corrosion. Int J Nav Archit Ocean Eng 7:509-525. https://doi.org/10.1515/ijnaoe-2015-0037
Saad-Eldeen S, Garbatov Y, Guedes Soares C (2013) Effect of corrosion severity on the ultimate strength of a steel box girder. Mar Struct 49:560-571. https://doi.org/10.1016/j.engstruct.2012.11.017
Shu Z, Moan T (2012) Ultimate hull girder strength of a bulk carrier under combined global and local loads in the hogging and alternate hold loading condition using nonlinear finite element analysis. J Mar Sci Technol 18(1):94-113. https://doi.org/10.1007/s00773-011-0147-9
Smith CS, Davidson PC, Chapman JC, Dowling PJ (1988) Strength and stiffness of ships’ plating under in-plane compression and tension. Trans R Inst Nav Archit 130:277-296
Thayamballi AK, Chen YK, Chen HH (1987) Deterministic and reliability based retrospective strength assessment of oceangoing vessels. SNAME Transactions 95:159-187
Timoshenko SP, Gere JM (1982) Theory of elastic stability, 2nd edn. McGraw-Hill, London, UK
Yoshikawa T, Bayatfar A, Kim BJ, Chen CP, Wang D, Boulares J, Gordo JM, Josefson L, Smith M, Kaeding P, Jensen P, Ojeda R, Benson S, Vhanmane S, Zhang S, Jiang X, Qian X (2015) Committee Ⅲ.1 Ultimate strength. Proceedings of the 19th International Ship and Offshore Structures Congress, Cascais, Portugal
Zhang Y, Huang Y, Zhang Q, Liu G (2016) Ultimate strength of hull structural plate with pitting corrosion damnification under combined loading. Ocean Eng 116:273-285. https://doi.org/10.1016/j.oceaneng.2016.02.039
Zhang Y, Huang Y, Meng F (2017) Ultimate strength of hull structural stiffened plate with pitting corrosion damage under uniaxial compression. Mar Struct 56:117-136. https://doi.org/10.1016/j.marstruc.2017.07.006

Memo

Memo:
Received date:2021-03-06。
Foundation item:Open access funding provided by Università Parthenope di Napoli within the CRUI-CARE Agreement.
Corresponding author:V. Piscopo,E-mail:vincenzo.piscopo@uniparthenope.it;A. Scamardella,E-mail:antonio.scamardella@uniparthenope.it
Last Update: 2021-11-04