|Table of Contents|

Citation:
 Jani Romanoff,Mihkel Kö,rgesaar,et al.Emerging Challenges for Numerical Simulations of Quasi-Static Collision Experiments on Laser-Welded Thin-Walled Steel Structures[J].Journal of Marine Science and Application,2020,(4):567-583.[doi:10.1007/s11804-020-00174-y]
Click and Copy

Emerging Challenges for Numerical Simulations of Quasi-Static Collision Experiments on Laser-Welded Thin-Walled Steel Structures

Info

Title:
Emerging Challenges for Numerical Simulations of Quasi-Static Collision Experiments on Laser-Welded Thin-Walled Steel Structures
Author(s):
Jani Romanoff1 Mihkel Körgesaar2 Heikki Remes1
Affilations:
Author(s):
Jani Romanoff1 Mihkel Körgesaar2 Heikki Remes1
1 Department of Mechanical Engineering, Aalto University, 00076 Espoo, Finland;
2 Estonian Maritime Academy, Tallinn University of Technology, Tallinna 19, 93811 Kuressaare, Estonia
Keywords:
Collision and groundingExperimentsThin-walled structureFinite element analysisWelding
分类号:
-
DOI:
10.1007/s11804-020-00174-y
Abstract:
This paper re-evaluates recently published quasi-static tests on laser-welded thin-walled steel structures in order to discuss the fundamental challenges in collision simulations based on finite element analysis. Clamped square panels were considered, with spherical indenter positioned at the mid-span of the stiffeners and moved along this centerline in order to change the load-carrying mechanism of the panels. Furthermore, the use of panels with single-sided flat bar stiffening and web-core sandwich panels enabled the investigation of the effect of structural topology on structural behavior and strength. The changes in loading position and panel topology resulted in different loading, structural and material gradients. In web-core panels, these three gradients occur at the same locations making the panel global responses sensitive for statistical variations and the failure process time-dependent. In stiffened panel with reduced structural gradient, this sensitivity and time-dependency in failure process is not observed. These observations set challenges to numerical simulations due to spatial and temporal discretization as well as the observed microrotation, which is beyond the currently used assumptions of classical continuum mechanics. Therefore, finally, we discuss the potential of non-classical continuum mechanics as remedy to deal with these phenomena and provide a base for necessary development for future.

References:

Abubakar A, Dow RS (2013) Simulation of ship grounding damage using the finite element method. Int J Solids Struct 50(5):623-636. https://doi.org/10.1016/j.ijsolstr.2012.10.016
Alsos HS, Amdahl J (2009) On the resistance to penetration of stiffened plates, part I-experiments. Int J Impact Eng 36(6):799-807. https://doi.org/10.1016/j.ijimpeng.2008.10.005
Alsos HS, Amdahl J, Hopperstad OS (2009) On the resistance to penetration of stiffened plates, part Ⅱ:numerical analysis. Int J Impact Eng 36(7):875-887. https://doi.org/10.1016/j.ijimpeng.2008.11.004
Barsoum I, Faleskog J (2007) Rupture mechanisms in combined tension and shear-experiments. Int J Solids Struct 44(6):1768-1786. https://doi.org/10.1016/j.ijsolstr.2006.09.031
Bazant ZP, Jirasek M (2002) Nonlocal integral formulations of plasticity and damage. J Eng Mech 128(11):1119-1149
Berntson K, Körgesaar M, Reinaldo Goncalves B and Romanoff J (2019) The influence of modelling weld effects when optimizing thin-walled structures for crashworthiness. Proceedings of the 29th International Ocean and Polar Engineering Conference ISOPE-2019 Conference, Honolulu, HI, USA, June 16-21, 2019:280-4287
Boronski D, Szala J (2006) Test of local strains in steel laser-welded sandwich structure. Polish Maritime Research, Special Issue, 31-36
Calle MAG, Salmi M, Mazzariol LM, Kujala P (2020) Miniature reproduction of raking tests on marine structure:similarity technique and experiment. Eng Struct 212:110527. https://doi.org/10.1016/j.engstruct.2020.110527
Choung J, Shim CS, Song HC (2012) Estimation of failure strain of EH36 high strength marine structural steel using average stress triaxiality. Mar Struct 29(1):1-21. https://doi.org/10.1016/j.marstruc.2012.08.001
Costas M, Morin D, Hopperstad OS, Børvik T, Langseth M (2019) A through-thickness damage regularisation scheme for shell elements subjected to severe bending and membrane deformations. J Mec Phys Solids 123:190-206
de Borst R (1990) Simulation of strain localization-a repraisal of the Cosserat continuum. Eng Comput 8:317-332
Dunand M, Mohr D (2014) Effect of Lode parameter on plastic flow localization after proportional loading at low stress triaxialities. J Mech Phys Solids 66(1):133-153. https://doi.org/10.1016/j.jmps.2014.01.008
Ehlers S, Varsta P (2009) Strain and stress relation for non-linear finite element simulations. Thin-Walled Struct 47(11):1203-1217. https://doi.org/10.1016/j.tws.2009.04.005
Ehlers S, Tabri K, Romanoff J, Varsta P (2012) Numerical and experimental investigation on the collision resistance of the X-core structure. Ships Offshore Struct 7(1):21-29. https://doi.org/10.1080/17445302.2010.532603
Fleck NA, Deshpande VS (2004) The resistance of clamped sandwich beams to shock loading. J Appl Mech 71(3):386-401
Frank D, Romanoff J, Remes H (2013) Fatigue strength assessment of laser stake-welded web-core steel sandwich panels. Fatigue Fract Eng Mater Struct 36(8):724-737. https://doi.org/10.1111/ffe.12038
Frodal BH, Morin D, Børvik T, Hopperstad OS (2020) On the effect of plastic anisotropy, strength and work hardening on the tensile ductility of aluminium alloys. Int J Solids Struct 188-189:118-132. https://doi.org/10.1016/j.ijsolstr.2019.10.003
Geers MGD, Kouznetsova VG, Brekelmans WAM (2019) Multi-scale computational homogenization:trends and challenges. J Comput Appl Math 234:2175-2182. https://doi.org/10.1016/j.cam.2009.08.077
Guedes Soares C, Basu R, Simonsen B.C, Egorov GV, Hung CF, Lindstrom P, Samuelides E, Vredeveldt A, Yoshikawa T (2009) Committee V.1. Damage assessment after accidental events, International Ship and Offshore Structures Congress, August 16-21, 2009, Seoul, Korea, 2:1-72
Haltom SS, Kyriakides S, Ravi-Chandar K (2013) Ductile failure under combined shear and tension. Int J Solids Struct 50(10):1507-1522. https://doi.org/10.1016/j.ijsolstr.2012.12.009
Hogström P, Ringsberg JW (2012) An extensive study of a ship’s survivability after collision-a parameter study of material characteristics, non-linear FEA and damage stability analyses. Mar Struct 27(1):1-28. https://doi.org/10.1016/j.marstruc.2012.03.001
Hogström P, Ringsberg JW, Johnson E (2009) An experimental and numerical study of the effects of length scale and strain state on the necking and fracture behaviours in sheet metals. Int J Impact Eng 36(10-11):1194-1203. https://doi.org/10.1016/j.ijimpeng.2009.05.005
Hoogeland M, Vredevelt AW (2017) Full thickness material tests for impact analysis verification. Progress in the Analysis and Design of Marine Structures-Guedes Soares & Garbatov (Eds), 2017, 449-458 Taylor & Francis Group, London, ISBN 978-1-138-06907-7
Jones N (2013) The credibility of predictions for structural designs subjected to large dynamic loadings causing inelastic behaviour. Int J Impact Eng 53(1):106-114. https://doi.org/10.1016/j.ijimpeng.2011.12.008
Jutila M (2009) Failure mechanism of a laser stake welded T-joint. M.Sc. thesis, Helsinki University of Technology, Department of Applied Mechanics
Karttunen AT, Reddy JN, Romanoff J (2019) Two-scale micropolar plate model for web-core sandwich panels. Int J Solids Struct 170:82-94. https://doi.org/10.1016/j.ijsolstr.2019.04.026
Körgesaar M, Romanoff J (2013) Influence of softening on fracture propagation in large-scale Shell structures. Int J Solids Struct 50(24):3911-3921. https://doi.org/10.1016/j.ijsolstr.2013.07.027
Kõrgesaar M, Romanoff J (2014) Influence of mesh size, stress triaxiality and damage induced softening on ductile fracture of large-scale shell structures. Mar Struct 38(1):1-17. https://doi.org/10.1016/j.marstruc.2014.05.001
Körgesaar M, Remes H, Romanoff J (2014) Size dependent response of large shell elements under in-plane tensile loading. Int J Solids Struct 51(21-22):3752-3761. https://doi.org/10.1016/j.ijsolstr.2014.07.012
Kõrgesaar M, Romanoff J, Palokangas P (2016) Penetration resistance of stiffened and web-core sandwich panels:experiments and simulations. Aalto University, Department of Mechanical Engineering, Finland. ISSN 1799-490X (pdf)
Kõrgesaar M, Romanoff J, Remes H (2017) Influence of material non-linearity on load carrying mechanism and strain path in stiffened panel. Procedia Structural Integrity. 2nd International Conference on Structural Integrity, ICSI 2017, 4-7 September 2017, Funchal, Madeira, Portugal https://doi.org/10.1016/j.prostr.2017.07.050
Kõrgesaar M, Romanoff J, Remes H, Palokangas P (2018a) Experimental and numerical penetration response of laser-welded stiffened panels. Int J Impact Eng 114(1):78-92
Kõrgesaar M, Romanoff J, Palokangas P (2018b) Experimental and numerical assessment of fracture initiation in laser-welded webcore sandwich panels. Eighth International Conference on, Thin-Walled Structures-ICTWS 2018, Lisbon, Portugal, July 24-27. Ref. b
Kõrgesaar M, Romanoff J, Remes H (2019) Fracture modelling of large thin-walled structures. New trends in fatigue and fracture-NT2F19, October 8-10, 2019, Tucson, Arizona, USA
Li Y, Wierzbicki T (2010) Prediction of plane strain fracture of AHSS sheets with post-initiation softening. Int J Solids Struct 47(17):2316-2327. https://doi.org/10.1016/j.ijsolstr.2010.04.028
Lou Y, Huh H, Lim S, Pack K (2012) New ductile fracture criterion for prediction of fracture forming limit diagrams of sheet metals. Int J Solids Struct 49(25):3605-3615. https://doi.org/10.1016/j.ijsolstr.2012.02.016
Matous K, Geers MGD, Kouznetsova VG, Gillman A (2017) A review of predictive nonlinear theories for multiscale modeling of heterogeneous materials. J Comput Phys 330:192-220. https://doi.org/10.1016/j.jcp.2016.10.070
Naar H, Kujala P, Simonsen BC, Ludolphy H (2002) Comparison of the crashworthiness of various bottom and side structures. Mar Struct 15(4-5):443-460. https://doi.org/10.1016/S0951-8339(02)00012-6
Namaplly P, Karttunen A, Reddy JN (2019) Nonlinear finite element analysis of lattice core sandwich beams. Eur J Mech/A Solids 74:431-439. https://doi.org/10.1016/j.euromechsol.2018.12.006
Ohtsubo H, Kawamoto Y, Kuroiwa T (1994) Experimental and numerical research on ship collision and grounding of oil tankers. Nucl Eng Des 150(2-3):385-396. https://doi.org/10.1016/0029-5493(94)90158-9
Östlund R, Oldenburg M, Häggblad HÅ, Berglund D (2015) Numerical failure analysis of steel sheets using a localization enhanced element and a stress based fracture criterion. Int J Solids Struct 56-57:1-10. https://doi.org/10.1016/j.ijsolstr.2014.12.010
Pedersen PT (2010) Review and application of ship collision and grounding analysis procedures. Mar Struct 23(3):241-262. https://doi.org/10.1016/j.marstruc.2010.05.001
Rabczuk T, Kim JY, Samaniego E, Belytschko T (2004) Homogenization of sandwich structures. Int J Numer Methods Eng 61:1009-1027
Reinaldo GB, Karttunen, A, Romanoff, J (2019) A nonlinear couple stress model for periodic sandwich beams. Compos. Struct 212:586-597
Ringsberg JW (2010) Characteristics of material, ship side structure response and ship survivability in ship collisions. Ships Offshore Struct 5(1):51-66. https://doi.org/10.1080/17445300903088707
Romanoff J, Varsta P (2007) Bending response of web-core sandwich plates. Compos Struct 81(2):292-302. https://doi.org/10.1016/j.compstruct.2006.08.021
Romanoff J, Remes H., Socha G, Jutila M (2006) Stiffness and strength testing of laser stake welds in steel sandwich panels. Helsinki University of Technology, Ship Laboratory, Report M291. ISBN951-22-8143-0, ISSN 1456-3045
Romanoff J, Remes H, Socha G, Jutila M, Varsta P (2007) The stiffness of laser stake welded T-joints in web-core sandwich structures. Thin-Walled Struct 45(4):453-462. https://doi.org/10.1016/j.tws.2007.03.008
Roth CC, Mohr D (2015) Ductile fracture experiments with locally proportional loading histories. Int J Plast 79(1):328-354. https://doi.org/10.1016/j.ijplas.2015.08.004
Rubino V, Deshpande VS, Fleck NA (2006) The dynamic response of Y-frame and corrugated core sandwich beams. Eur J Mech A/Solids 28:14-24. https://doi.org/10.1016/j.euromechsol.2008.06.001
Schreuber M, Hogström P, Ringsberg JW, Johnson E, Janson CE (2011) A method for assessment of the survival time of a ship damaged by collision. J Ship Res 55(2):86-99
Simonsen BC, Törnqvist R (2004) Experimental and numerical modelling of ductile crack propagation in large-scale shell structures. Mar Struct 17(1):1-27. https://doi.org/10.1016/j.marstruc.2004.03.004
Srinivasa AR, Reddy JN (2017) An overview of theories of continuum mechanics with nonlocal elastic response and a general framework for conservative and dissipative systems. Appl Mech Rev 69:030802-1-18
Sumi Y (2019) Structural safety of ships developed by lessons learned from the 100-year history of break-in-two accidents. Mar Struct 64:481-491. https://doi.org/10.1016/j.marstruc.2018.12.003
Tabri K, Määttänen J, Ranta J (2008) Model-scale experiments of symmetric ship collisions. J Mar Sci Technol 13(1):71-84. https://doi.org/10.1007/s00773-007-0251-z
Tillbrook MT, Radford DD, Deshpande VS, Fleck NA (2007) Dynamic crushing of sandwich panels with prismatic lattice cores. Int J Solids Struct 44:6101-6123. https://doi.org/10.1016/j.ijsolstr.2007.02.015
Uppaluri R, Reddy NV, Dixit PM (2011) An analytical approach for the prediction of forming limit curves subjected to combined strain paths. Int J Mech Sci 53:365-373. https://doi.org/10.1016/j.ijmecsci.2011.02.006
Vredeveldt AW, Wevers LJ (1992) Full scale ship collision tests. First Joint Conference on marine Safety and Environment/Ship production, June 1-5. Delft University Press, Delft
Wadley HNG, Børvik T, Olovsson L, Wetzel JJ, Dharmasena KP, Hopperstad OS, Deshpande VS, Hutchinson JW (2013) Deformation and fracture of impulsively loaded sandwich panels. J Mech Phys Solids 61(2):674-699. https://doi.org/10.1016/j.jmps.2012.07.007
Walters CL (2014) Framework for adjusting for both stress triaxiality and mesh size effect for failure of metals in shell structures. Int J Crashworthiness 19(1):1-12. https://doi.org/10.1080/13588265.2013.825366
Werner B, Daske C, Heyer H, Sander M, Schöttelndreyer M, Fricke W (2014) The influence of weld joints on the failure mechanism of scaled double hull structures under collision load in finite element simulations. Procedia Mater Sci 3:307-312. https://doi.org/10.1016/j.mspro.2014.06.053
Werner B, Heyer H, Sander M (2015) Numerical investigations of collision experiments considering weld joints. Eng Fail Anal 58:351-368. https://doi.org/10.1016/j.engfailanal.2015.04.021
Wierzbicki T, Bao Y, Lee YW, Bai Y (2005) Calibration and evaluation of seven fracture models. Int J Mech Sci 47(4-5):719-743. https://doi.org/10.1016/j.ijmecsci.2005.03.003
Woelke PB, Abboud NN (2012) Modeling fracture in large scale shell structures. J Mech Phys Solids 60(12):2044-2063. https://doi.org/10.1016/j.jmps.2012.07.001
Woelke PB, Shields MD, Abboud NN, Hutchinson JW (2013) Simulations of ductile fracture in an idealized ship grounding scenario using phenomenological damage and cohesive zone models. Comput Mater Sci 80(1):79-95. https://doi.org/10.1016/j.commatsci.2013.04.009
Woelke PB, Londono JG, Knoerr LO, Dykeman J, Malcolm S (2018) Fundamental differences between fracture behavior of thin sheets under plane strain bending and tension. IOP Conf Ser Mater Sci Eng 418:1-7. https://doi.org/10.1088/1757-899X/418/1/012078

Memo

Memo:
Received date:2020-05-07;Accepted date:2020-08-10。
Foundation item:The experimental program would not have been possible without the funding by the 100-Year Foundation of the Federation of Finnish Technology Industries and the Scientific Advisory Board for Defense. The analyses were carried out in project called Ultra Lightweight and Fracture Resistant Thin-Walled Structures through Optimization of Strain Paths, by the Academy of Finland (310828). This work was also supported by the Estonian Research Council grant PSG526.
Corresponding author:Jani Romanoff,jani.romanoff@aalto.fi
Last Update: 2021-04-07