|Table of Contents|

Citation:
　Ziya Peng,Ping Yang,Kang Hu,et al.Study on Crack Closure Considering Welding Residual Stress Under Constant Amplitude Loading and Overloading[J].Journal of Marine Science and Application,2020,(2):195-207.[doi:10.1007/s11804-020-00144-4]
Click and Copy

Study on Crack Closure Considering Welding Residual Stress Under Constant Amplitude Loading and Overloading

Info

Title:
Study on Crack Closure Considering Welding Residual Stress Under Constant Amplitude Loading and Overloading
Author(s):
Ziya Peng1;  Ping Yang1; 2;  Kang Hu1;  Yueling Song1
Affilations:
Author(s):
Ziya Peng1;  Ping Yang1; 2;  Kang Hu1;  Yueling Song1
1 Departments of Naval Architecture, Ocean and Structural Engineering, School of Transportation, Wuhan University of Technology, Wuhan, China;
2 Key Laboratory of High Performance Ship Technology(Wuhan University of Technology), Ministry of Education, Wuhan 430063, China
Keywords:
Welding residual stress; Crack closure; Overloading; Crack propagation; Butt-welded plate
分类号:
-
DOI:
10.1007/s11804-020-00144-4
Abstract:
Welding residual stress in the engineering structure has a non-negligible influence on crack propagation, and crack closure is a significant factor affecting the crack propagation. Based on the elastoplastic finite element method and crack closure theory, we studied crack closure and residual compressive stress field of butt-welded plates under constant amplitude loading and overloading regarding the stress ratio, maximum load, overload ratio, and number of overloads. The results show that the welding residual tensile stress can decrease the crack closure because of a decrease in the residual compressive stress in the wake zone, but the effect is gradually reduced with increased stress ratio or maximum load. And the combined effect of welding residual tensile stress and overload can produce a stronger retardation effect on crack propagation.

References:

Allison JE (1988) The measurement of crack closure during fatigue crack growth. In: Fracture Mechanics: Eighteenth Symposium, ASTM STP 945, vol 18, pp 913-933
Antunes FV, Rodrigues DM (2008) Numerical simulation of plasticity induced crack closure: identification and discussion of parameters. Eng Fract Mech 75(10):3101-3120. https://doi.org/10.1016/j.engfracmech.2007.12.009
Antunes FV, Borrego LF, Costa JD et al (2010) A numerical study of fatigue crack closure induced by plasticity. Fatigue Fract Eng Mater Struct 27(9):825-835. https://doi.org/10.1111/j.1460-2695.2004.00738.x
Antunes FV, Sousa T, Branco R et al (2015) Effect of crack closure on non-linear crack tip parameters. Int J Fatigue 53:63. https://doi.org/10.1016/j.ijfatigue.2014.10.001
Bao R, Zhang X (2010) An inverse method for evaluating weld residual stresses via fatigue crack growth test data. Eng Fract Mech 77(16):3143-3156. https://doi.org/10.1016/j.engfracmech.2010.08.010
Bao R, Zhang X, Yahaya NA et al (2010) Evaluating stress intensity factors due to weld residual stresses by the weight function and finite element methods. Eng Fract Mech 77(13):2550-2566. https://doi.org/10.1016/j.engfracmech.2010.06.002
Borrego LP, Antunes FV, Costa JD, Ferreira JM (2012) Numerical simulation of plasticity induced crack closure under overloads and high-low blocks. Eng Fract Mech 95:57-71. https://doi.org/10.1016/j.engfracmech.2012.07.016
Chen J, You M, Huang Y (2018) Quantitative analysis on the influence of tensile overloading on crack opening stress. J Harbin Eng Univ 39(1):10-15. https://doi.org/10.11990/jheu.201608015
Cochran KB, Dodds RH, Hjelmstad KD et al (2011) The role of strain ratcheting and mesh refinement in finite element analyses of plasticity induced crack closure. Int J Fatigue 33(9):1205-1220. https://doi.org/10.1016/j.ijfatigue.2011.03.005
Daneshpour S, Dyck J, Ventzke V, Huber N (2012) Crack retardation mechanism due to overload in base material and laser welds of Al alloys. Int J Fatigue 42:95-103. https://doi.org/10.1016/j.ijfatigue.2011.07.010
Ding ZY, Wang XG, Gao ZL (2013) Numerical simulation of the effect of loading history and crack closure on crack propagation behavior. Eng Mechanic 30(8):244-250. https://doi.org/10.6052/j.issn.1000-4750.2012.04.0272
Dong Q, Yang P, Xu G, Deng J (2016) Mechanisms and modeling of low cycle fatigue crack propagation in a pressure vessel steel Q345. Int J Fatigue 2016:2-10. https://doi.org/10.1016/j.ijfatigue.2016.03.026
Dong Q, Yang P, Xu G (2019) Low cycle fatigue analysis of CTOD under variable amplitude loading for AH-32 steel. Mar Struct 63:257-268. https://doi.org/10.1016/j.marstruc.2018.10.002
Elber W (1971) The significance of fatigue crack closure. Damage Tolerance in Aircraft Structures, ASTM STP, vol 486, pp 230-242
Feng GQ, Garbatov Y, Soares CG (2012) Probabilistic model of the growth of correlated cracks in a stiffened panel. Eng Fract Mech 84:83-95. https://doi.org/10.1016/j.engfracmech.2012.01.008
George L, Ioannis D (2009) Numerical investigation of through crack behavior under welding residual stresses. Eng Fract Mech 76(11):1691-1702. https://doi.org/10.1016/j.engfracmech.2009.03.006
Han Y, Cui WC, Huang XP, et al (2007) Fatigue strength assessment of large-scale ship structures. Ship Building of China
Huang XP, Moan T (2007) Improved modeling of the effect of R-ratio on crack growth rate. Int J Fatigue 29:591-602. https://doi.org/10.1016/j.ijfatigue.2006.07.014
Kim JS, Kim CY, Song JH (1991) Fatigue crack growth and closure through a tensile residual stress field under random loading. Key Eng Mater 51-52:283-288. https://doi.org/10.4028/www.scientific.net/KEM.51-52.283
Larue JE, Daniewicz SR (2007) Predicting the effect of residual stress on fatigue crack growth. Int J Fatigue 29(3):508-515. https://doi.org/10.1016/j.ijfatigue.2006.05.008
Lee C, Chang K (2011) Finite element computation of fatigue growth rates for mode I cracks subjected to welding residual stresses. Eng Fract Mech 78(13):2505-2520. https://doi.org/10.1016/j.engfracmech.2011.06.006
Lei Y (2008) Finite element crack closure analysis of a compact tension specimen. Int J Fatigue 30(1):21-31. https://doi.org/10.1016/j.ijfatigue.2007.02.012
Li YZ, Li XF (2006) A study of the numerical simulation technique for fatigue crack closure. Mechanic Sci Technol 25(10):1233-1237. https://doi.org/10.1016/S1003-6326(06)60040-X
Li LB, Moan T, Zhang B (2007) Residual stress shakedown in typical weld joints and its effect on fatigue of FPSOs. Proceedings of the 26th International Conference on Offshore Mechanics and Arctic Engineering
Li YZ, Wang Q, Zhang ZP, He J (2011) Exploring further fatigue crack closure in residual stress field through numerical simulation. J Northwestern Polytech Univ 29(1):97-102. https://doi.org/10.3969/j.issn.1000-2758.2011.01.018
Li YZ, Geng WJ, Shu YX, WANG Q (2014) Fatigue crack closure and residual stress effect of overload. J Northwestern Polytech Univ 30(4):529-535. https://doi.org/10.3969/j.issn.1000-2758.2014.04.010
Liljedahl CD, Tan ML, Zanellato O et al (2008) Evolution of residual stresses with fatigue loading and subsequent crack growth in a welded aluminium alloy middle tension specimen. Eng Fract Mech 75(13):3881-3894. https://doi.org/10.1016/j.engfracmech.2008.02.005
Liljedahl CD, Brouard J, Zanellato O et al (2009) Weld residual stress effects on fatigue crack growth behaviour of aluminium alloy 2024-T351. Int J Fatigue 31(6):1081-1088. https://doi.org/10.1016/j.ijfatigue.2008.05.008
Lv HT, Wang JM, Liu XR (2016) Numerical simulation for residual stress field of shot-peening on crack closure effect. 29(2):102-110. https://doi.org/10.11933/j.issn.1007-9289.2016.02.015
Matos PFPD, Nowell D (2008) Numerical simulation of plasticity-induced fatigue crack closure with emphasis on the crack growth scheme: 2D and 3D analyses. Eng Fract Mech 75(8):2087-2114. https://doi.org/10.1016/j.engfracmech.2007.10.017
Matos PFPD, Nowell D (2009) Experimental and numerical investigation of thickness effects in plasticity-induced fatigue crack closure. Int J Fatigue 31(11-12):1795-1804. https://doi.org/10.1016/j.ijfatigue.2008.12.003
Tada H, Paris PC (1983) The stress intensity factor for a crack perpendicular to the welding bead. Int J Fract 21(4):279-284. https://doi.org/10.1007/BF00942346
Tan JM, Fitzpatrick ME, Edwards L et al (2007) Stress intensity factors for through-thickness cracks in a wide plate: derivation and application to arbitrary weld residual stress fields. Eng Fract Mech 74(13):2030-2054. https://doi.org/10.1016/j.engfracmech.2006.10.017
Terada H (2011) Stress intensity factor analysis and fatigue behavior of a crack in the residual stress field of welding. Fatigue Aircraft Struct 2011(3):5-15. https://doi.org/10.2478/v10164-010-0032-8
Wang H, Buchholz FG, Richard HA, Jägg S, Scholtes B (1999) Numerical and experimental analysis of residual stresses for fatigue crack growth. Comput Mater Sci 16(1-4):104-112. https://doi.org/10.1016/s0927-0256(99)00052-x
Wang F, Huang XP, Cui WC (2014) Fatigue life prediction of cracked stiffened plate using the improved fatigue crack growth rate model. J Ship Mechan 18(6):700-710. https://doi.org/10.3969/j.issn.1007-7294.2014.06.009
Wang JM, Zhao LL, Lv HT (2016). Effect shot peening residual stress on crack growth fatigue life. 37(4):608-613. https://doi.org/10.11990/jheu.201412022

Memo

Memo:
Received date:2018-10-14;Accepted date:2019-04-22。
Foundation item:This study was supported by the National Natural Science Foundation of China (Grant No. 51779198).
Corresponding author:Ping Yang,pyang@whut.edu.cn
Last Update: 2020-11-07