|Table of Contents|

 Wie Min Gho,Ye Yang.Ultimate Strength of Completely Overlapped Joint for Fixed Offshore Wind Turbine Jacket Substructures[J].Journal of Marine Science and Application,2019,(1):99-113.[doi:10.1007/s11804-019-00074-w]
Click and Copy

Ultimate Strength of Completely Overlapped Joint for Fixed Offshore Wind Turbine Jacket Substructures


Ultimate Strength of Completely Overlapped Joint for Fixed Offshore Wind Turbine Jacket Substructures
Wie Min Gho12 Ye Yang3
Wie Min Gho12 Ye Yang3
1 Maritime Production Research Pte. Ltd, Singapore 915806, Singapore;
2 School of Civil and Environmental Engineering, Nanyang Technological University, Singapore 639798, Singapore;
3 Global Maritime Consultancy Ltd, London EC2A 2DX, UK
Offshore wind turbineJacket substructureEccentric jacketCompletely overlapped jointUltimate strengthCyclic loadingDuctilityEnergy absorption
This paper presents an innovative eccentric jacket substructure for offshore wind turbines to better withstand intense environmental forces and to replace conventional X-braced jackets in seismically active areas. The proposed eccentric jacket comprises of completely overlapped joint at every joint connection. The joint consists of a chord and two braces in a single plane. The two braces are fully overlapped with a short segment of the diagonal brace welded directly onto the chord. The characteristic feature of this joint configuration is that the short segment member can be designed to absorb and dissipate energy under cyclic load excitation. The experimental and numerical study revealed that the completely overlapped joint performed better in terms of strength resistance, stiffness, ductility, and energy absorption capacity than the conventional gap joints commonly found in typical X-braced jacket framings. The eccentric jacket could also be designed to becoming less stiff, with an inelastic yielding and local buckling of short segment member, so as to better resist the cyclic load generated from intense environmental forces and earthquake. From the design economics, the eccentric jacket provided a more straightforward fabrication with reduced number of welded joints and shorter thicker wall cans than the conventional X-braced jacket. It can therefore be concluded based on the results presented in the study that by designing the short segment member in accordance with strength and ductility requirement, the eccentric jacket substructure supporting the wind turbine could be made to remain stable under gravity loads and to sustain a significantly large amount of motion in the event of rare and intense earthquake or environmental forces, without collapsing.


American Petroleum Institute, API RP2A (2000) Recommended practice for planning, designing and constructing fixed offshore platforms, American Petroleum Institute, Washington, D.C, USA
American Welding Society, AWS (2000) Structural welding code-steel, ANSI/AWS, D1.1-2000, American Welding Society, Miami, USA
British Standard Institution, BSI (1998) Metallic materials-tensile testing, BS EN 10002-1:1990, British Standard Institution, London
Canadian Standards Associations, CSA (1989) Steel structures for buildings, limit states design, CAN-CSA S16.1, Canada
Cheung LY, Gho WM, Fung TC, Soh CK (1998) Design economics of offshore structure-eccentric jacket.Journal Institution of Engineers, Singapore 138(3):42-49
European Convention for Constructed Steelwork, ECCS (1986)Recommended testing procedure for assessing the behaviour of structural steel elements under cyclic loads, European Convention for Constructed Steelwork Technical Committee 1-Structural Safety and Loadings, Technical Working Group 1.3-Seismic Design
Fung TC, Soh CK, Gho WM, Qin F (2001) Ultimate capacity of completely overlapped tubular joints I:an experimental investigation.J Constr Steel Res 57(8):855-880.https://doi.org/10.1016/S0143-974X(01)00013-X
Gao F, Gho WM (2008) Parametric equations to predict SCF of axially loaded completely overlapped tubular circular hollow section joints.J Struct Eng ASCE 2008(3):412-420 https://ascelibrary.org/doi/abs/10.1061/(ASCE)0733-9445(2008)134:3(412)
Gao F, Hu B, Zhu HP (2013) Parametric equations to predict LJF of completely overlapped tubular joints under lap brace axial loading.J Constr Steel Res 89:284-292.https://doi.org/10.1016/j.jcsr.2013.07.010
Gho WM (2009) Local joint flexibility of tubular circular hollow section joints with complete overlap of braces.Proceedings of Tubular Structures XⅡ, Shanghai, China, 607-614
Gho WM, Yang Y (2005) Cyclic performance of completely overlapped tubular joints.Proceedings of The 15th International Offshore and Polar Engineering Conference, ISOPE, Seoul, Korea, 320-324
Gho WM, Yang Y (2008) Parametric equations for static strength of tubular circular hollow section joints with complete overlap of braces.J Struct Eng ASCE 2008(3):393-401 https://ascelibrary.org/doi/abs/10.1061/(ASCE)0733-9445(2008)134:3(393)
Gho WM, Fung TC, Soh CK (2003) Stress and strain concentration factors of completely overlapped tubular K (N)-joints.J Struct Eng ASCE 129(1):21-29 https://ascelibrary.org/doi/abs/10.1061/(ASCE)0733-9445(2003)129:1(21)
Gho WM, Yang Y, Gao F (2006) Failure mechanism of tubular CHS joints with complete overlap braces.Thin-Walled Struct 44(2006):655-666.https://doi.org/10.1016/j.tws.2006.05.007
MARC (2000) User information.Volume A, MARC Analysis Research Corporation, California, USA
New Zealand Standar d, NZS (1992) Code of practice for general structural design and design loading for buildings, and commentary, Part1, 2, NZS 4203, Standards Association of New Zealand, Wellington, New Zealand
Soh CK, Fung TC, Qin F, Gho WM (2001) Behaviour of completely overlapped tubular joints under cyclic loading.J Struct Eng ASCE 2001(2):122-128 https://ascelibrary.org/doi/abs/10.1061/(ASCE) 0733-9445(2001)127:2(122)
Yang Y (2006) Behaviour study of completely overlapped tubular joints under monotonic and cyclic axial loading.Ph.D.thesis, Nanyang Technological University, Singapore
Yeter B, Garbatov Y, Guedes Soares C (2016) Evaluation of fatigue damage model predictions for fixed offshore wind turbine support structures.Int J Fatigue 87:71-80.https://doi.org/10.1016/j.ijfatigue.2016.01.007
Yura JA, Zettlemoyer N, Edwards IF (1980) Ultimate capacity equations for tubular joints.Offshore Technology Conference, OTC 3690, Houston:113-127.https://doi.org/10.4043/3690-MS


Received date:2017-10-12。
Corresponding author:Wie Min Gho,cwmgho@gmail.com
Last Update: 2019-05-14