|Table of Contents|

Citation:
 Peng Zhang.Experimental Research on Flash Boiling Spray of Dimethyl Ether[J].Journal of Marine Science and Application,2014,(4):416-421.[doi:10.1007/s11804-014-1268-4]
Click and Copy

Experimental Research on Flash Boiling Spray of Dimethyl Ether

Info

Title:
Experimental Research on Flash Boiling Spray of Dimethyl Ether
Author(s):
Peng Zhang
Affilations:
Author(s):
Peng Zhang
China Ship Development and Design Center, Wuhan 430064, China
Keywords:
dimethyl ether flash boiling spray high-speed digital imaging spray tip penetration spray angle vortex ring structure
分类号:
-
DOI:
10.1007/s11804-014-1268-4
Abstract:
The high-speed digital imaging technique is applied to observe the developing process of flash boiling spray of dimethyl ether at low ambient pressure, and the effects of nozzle opening pressure and nozzle hole diameter on the spray shape, spray tip penetration and spray angle during the injection are investigated. The experimental results show that the time when the vortex ring structure of flash boiling spray forms and its developing process are determined by the combined action of the bubble growth and breakup in the spray and the air drag on the leading end of spray; with the enhancement of nozzle opening pressure, the spray tip penetration increases and the spray angle decreases. The influence of nozzle hole diameter on the spray tip penetration is relatively complicated, the spray tip penetration is longer with a smaller nozzle hole diameter at the early stage of injection, while the situation is just opposite at the later stage of injection. This paper establishes that the variation of spray angle is consistent with that of nozzle hole diameter.

References:

Duan SL, Feng L, Song YC, Chen JH (1999). The investigation on droplet distribution and combustion characteristics of flash boiling spray in diesel engines. Transactions of Chinese Society for Internal Combustion Engines, 17(1), 54-58. (in Chinese)

Eran S, Tali BK, Alexander R (2008). Flash-boiling atomization. Progress in Energy and Combustion Science, 34, 417-439.
Hou YC, Huang Z, Xiao J, Qiao XQ, Lü XC (2005). Phase change in the spray of reformulated n-dodecane fuel with liquefied CO2. Transactions of Chinese Society for Internal Combustion Engines, 23(2), 113-118. (in Chinese)
Kawano D, Goto Y, Odaka M, Senda J (2004). Modeling atomization and vaporization processes of flash-boiling spray. SAE technical paper, Paper 2004-01-0534.
Lee SW, Jin K, Yasuhiro D (2001). Spray characteristics of alternative fuels in constant volume chamber (comparison of the spray characteristics of LPG, DME and n-Dodecane). JSAE Review, 22(3), 271-276.
Lienhard JH, Stephenson JM (1996). Temperature and scale effects upon cavitation and flashing in free and submerged jets. ASME Journal of Basic Engineering, 6, 525-532.
Lü XC, Huang Z, Li XL (2003). A survey of world investigation on DME as alternative fuel. Vehicle Engine, (4), 39-42. (in Chinese)
Ma ZZ, Qi YL, Xu BY (2007). Research on LPG spray for liquid phase injection system. Journal of Shandong Jianzhu University, 22(2), 131-135. (in Chinese)
Oguma M, Hyun G, Goto S, Sugiyama K (2002). Atomization characteristics for various ambient pressure of dimethyl ether (DME). SAE technical paper, Paper 2002-01-1711.
Ra YC, Reitz RD (2004). A model for droplet vaporization for use in gasoline and HCCI engine applications. Journal of Engineering for Gas Turbines and Power, 126(4), 422-428.
Suh HK, Park SW, Lee CS (2006). Atomization characteristics of dimethyl ether fuel as an alternative fuel injected through a common-rail injection system. Energy and Fuels, 20(4), 1471-1481.
Wakai K, Yoshizaki T, Nishida K, Takezaki T (1999). Numerical and experimental analyses of the injection characteristics of dimethyl ether with a D.I. diesel injection system. SAE technical paper, Paper 1999-01-1122.
Wang HW, Zhou LB (2001). Study on spray characteristics of dimethyl ether. Journal of Xi’an Jiaotong University, 35(9), 918-921. (in Chinese)
Wang Y, Dong HY, Zhou LB, Pan KY (2004). Investigation of the performance of diesel engine fueled with dimethly ether and vehicle driving test. Journal of Xi’an Jiaotong University, 38(1), 24-27. (in Chinese)
Wen H, Liu YC, Wei MR, Zhang YS (2003). Analysis of the spray characteristics of DME and diesel by numerical simulation. Transactions of Chinese Society for Internal Combustion Engines, 21, 199-204. (in Chinese)
Yu J, Bae C (2003). Dimethyl ether (DME) spray characteristics in a common-rail fuel injection system. Journal of Automobile Engineering, 217, 1135-1144.
Yu J, Lee J W, Choongsik B (2002). Dimethyl ether (DME) spray characteristics compared to diesel in a common-rail fuel injection system. SAE technical paper, Paper 2002-01-2898.
Yu JJ, Zhang YS, Elkelawy M, Zhang HY (2007). The research status and prospect of flash boiling spray. Vehicle Engine, (4), 1-7. (in Chinese)
Yu JJ, Zhang YS, Elkelawy M, Zhang HY (2009). Investigation and numerical simulation of DME flash boiling spray characteristics. Chinese Internal Combustion Engine Engineering, 30(3), 45-50. (in Chinese)
Zeng YB, Lee CF (2001). An atomization model for flash boiling sprays. Combustion Science and Technology, 169(1), 45-67.
Zeng YB, Lee CF (2002). A preferential vaporization model for multi-component droplets and sprays. Atomization and Sprays, 12(1), 163-186.
Zeng W, Xu M, Zhang GM, Zhang YY, Cleary DJ (2012). Atomization and vaporization for flash-boiling multi-hole sprays with alcohol fuels. Fuel, 95(1), 287-297.
Zhou GM, Zhang YS, Zhang HY (2007). Experimental study on transient velocity field of DME spray by digital particle image velocimetry. Chinese Internal Combustion Engine Engineering, 28(3), 1-5. (in Chinese)
Zuo B, Gomes AM, Rutland CJ (2000). Modeling superheated fuel sprays and vaporization. International Journal of Engine Research, 1(4), 321-336.

Memo

Memo:
-
Last Update: 2014-12-09