|Table of Contents|

 Morteza Ghassabzadeh and Hassan Ghassemi.Automatic Generation of the Planning Tunnel High Speed Craft Hull Form[J].Journal of Marine Science and Application,2012,(4):453-461.[doi:10.1007/s11804-012-1155-9]
Click and Copy

Automatic Generation of the Planning Tunnel High Speed Craft Hull Form


Automatic Generation of the Planning Tunnel High Speed Craft Hull Form
Morteza Ghassabzadeh and Hassan Ghassemi
Morteza Ghassabzadeh and Hassan Ghassemi
Department of Ocean Engineering, Amirkabir University of Technology, Tehran 15875-4413, Iran
planning tunnel craft hull form automatic generation high speed craft
The creation of geometric model of a ship to determine the characteristics of hydrostatic and hydrodynamic, and also for structural design and equipments arrangement are so important in the ship design process. Planning tunnel high speed craft is one of the crafts in which, achievement to their top speed is more important. These crafts with the use of tunnel have the aero-hydrodynamics properties to diminish the resistance, good sea-keeping behavior, reduce slamming and avoid porpoising. Because of the existence of the tunnel, the hull form generation of these crafts is more complex and difficult. In this paper, it has attempted to provide a method based on geometry creation guidelines and with an entry of the least control and hull form adjustment parameters, to generate automatically the hull form of planning tunnel craft. At first, the equations of mathematical model are described and subsequent, three different models generated based on present method are compared and analyzed. Obviously, the generated model has more application in the early stages of design.


Calkins D, Schachter RD, Oliveira LT (2001). An automated computational method for planing hull form definition in concept design. Ocean Engineering, 28(3), 297-327.
Hu W, Zou ZJ (2008). Geometry modeling of ship hull based on non-uniform B-Spline. Journal of Shanghai Jiao Tong Univ., 13 (2), 189-192.
Hinatsu M(2004). Fourier NURBS method to express ship hull form. Journal of Marine Science and Technology, 9, 43–49.
Liu YJ, Zhu XL, Ji ZS (2005). Ship hull plate processing surface fairing with constraints based on B-Spline. Journal of Marine Science and Application, 4(3), 13-17.
Mancuso A (2006). Parametric design of sailing hull shapes. Ocean Engineering, 33(2), 234-246.
Perez-Arribas F, Suarez-Suarez JA, Ferna´ndez-Jambrina L (2006). Automatic surface modeling of a ship hull. Computer-Aided Design, 38(6), 584-594.
Perez FL, Clemente JA (2008). Parametric generation, modeling, and fairing of simple hull lines with the use of non-uniform rational B-Spline surfaces. Journal of Ship Research, 52(1), 1-15.
Sarioz E (2006). An optimization approach for fairing of ship hull forms. Ocean Engineering, 33, 2105-2118.


Last Update: 2012-12-12