Ckdenas R, Peiia R, Ashe G, Clare J (2000). Control strategies for energy recovery from a flywheel using a vector controlled induction machine. 2000 IEEE 31st Annual Power Electronics Specialists Conference, Galway, Ireland, 454-459.
Jang SM, You DJ, Ko KJ, Choi SK (2008). Design and experimental evaluation of synchronous machine without iron loss using double-sided Halbach magnetized PM rotor in high power FESS. IEEE Transactions on Magnetics, 44(11), 4337-4340.
Jang SM, You DJ, Ko KJ, Choi SK (2009). Analysis on operational power and eddy current losses for applying coreless double-sided permanent magnet synchronous motor/generator to high-power flywheel energy storage system. Journal of Applied Physics, 105(7), 105-107.
Kato S, Takaku T, Sumitani H, Shimada H (2009). Development of voltage sag compensator and UPS using a flywheel induction motor and an engine generator. Electrical Engineering in Japan (English translation of Denki Gakkai Ronbunshi), 167(1), 844-850.
Kohari Z (2009). Test results of a compact superconducting flywheel energy storage with disk-type permanent magnet motor/generator unit. IEEE Transactions on Applied Superconductivity, 19(3), 2095-2098.
Park JD, Kalev C, Hofmann HF (2008). Control of high-speed solid-rotor synchronous reluctance motor/generator for flywheel-based uninterruptible power supplies. IEEE Transactions on Industrial Electronics, 55(8), 3038-3046.
Rajapakshe A, Madawala UK, Muthumani D (2008). A model for a fly-wheel driven by a grid connected switch reluctance machine. 2008 IEEE International Conference on Sustainable Energy Technologies, Singapore, 1025-1030.
Tang Pinghua (2009). Research on magnetic suspension flywheel electric machine for energy storage and control of drive system. PhD thesis, Harbin Institute of Technology, Harbin, 2-6. (in Chinese)
Tang Shuangqing (2003). Research on theory of magnetic suspension supporting system and application for flywheel battery. PhD thesis, Huazhong University of Science & Technology, Wuhan, 1-2. (in Chinese)
Upadhyay P, Mohan N (2009). Design and FE analysis of surface mounted permanent magnet motor/generator for high-speed modular flywheel energy storage systems. Proceedings of the 2009 IEEE Energy Conversion Congress and Exposition, San Jose, 3630-3633.
Wang Zhengguang (2008). Design of controlled system for flywheel driven device. Master thesis, University of Electronic Science and Technology, Chengdu, 9-13. (in Chinese)
Wasaki SD, Rajesh P, Liu Yong, Pride A, Zhu ZQ, James BJ (2009). Influence of PWM on the proximity loss in permanent-magnet brushless AC machines. IEEE Transactions on Industry Applications, 45(4), 1359-1367.
Xi N, Sullivan CR (2009). An equivalent complex permeability model for litz-wire windings. IEEE Transactions on Industry Applications, 45(2), 854-860.
Xia ZP, Zhu ZQ, Howe D (2004). Analytical magnetic field analysis of Halbach magnetized permanent magnet machines. IEEE Transactions on Magnetics, 40(4), 1864-1872.
Yu Li, Cao Yongjuan, Liu Hexiang, Hu Qiansheng (2009). Design of a high efficiency generator/motor for flywheel energy storage system. International Conference on Sustainable Power Generation and Supply, Nanjing, 1- 3.
Yu Yali, Wang Yuanxi, Sun Feng (2011a). The latest development of the motor/generator for the flywheel energy storage system. Proceedings 2011 International Conference on Mechatronic Science, Electric Engineering and Computer, Harbin, 1228-1232.
Yu Yali, Wang Yuanxi, Sun Feng (2011b). Design of permanent magnet motor/generator using Halbach magnetized structure for the flywheel energy storage system. Proceedings of the 6th International Forum on Strategic Technology, Harbin, 593-597.
Zhu Deming, Yan Yangguang (2008). Features of air-gap flux density in segmented Halbach permanent magnet synchronous motor and its no-load EMF waveform optimization. Transactions of China Electrotechnical Society, 23(11), 22-27.
Zhu ZQ,Howe D (2001). Halbach permanent magnet machine and applications: a review. IEEE Proceedings of the Electronics, 148(4), 299-308.
Zhu ZQ, Xia ZP, Atallah K, Jewell GW, Howe D (2000). Analysis of anisotropic bonded NdFeB halbach cylinders accounting for partial powder alignment. IEEE Transactions on Magnetics, 36(5), 3575-3577.