|Table of Contents|

Citation:
　M. Tadros,M. Ventura,C. Guedes Soares.Fuel Consumption Analysis of Single and Twin-Screw Propulsion Systems of a Bulk Carrier[J].Journal of Marine Science and Application,2023,(4):741-750.[doi:10.1007/s11804-023-00372-4]
Click and Copy

Fuel Consumption Analysis of Single and Twin-Screw Propulsion Systems of a Bulk Carrier

Info

Title:
Fuel Consumption Analysis of Single and Twin-Screw Propulsion Systems of a Bulk Carrier
Author(s):
M. Tadros1; 2;  M. Ventura1;  C. Guedes Soares1
Affilations:
Author(s):
M. Tadros1; 2;  M. Ventura1;  C. Guedes Soares1
1 Centre for Marine Technology and Ocean Engineering(CENTEC), Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais 1, 1049-001 Lisboa, Portugal;
2 Department of Naval Architecture and Marine Engineering, Faculty of Engineering, Alexandria University, Alexandria 21544, Egypt
Keywords:
Propeller performance|Exhaust emissions|Energy efficiency|IMO|Decarbonization|Fuel consumption|Single and twin-screw
分类号:
-
DOI:
10.1007/s11804-023-00372-4
Abstract:
This paper presents a comparative analysis between single and twin-screw propulsion systems of a bulk carrier to evaluate the ship and propeller performance in terms of fuel consumption as well as to discuss the cavitation and noise criteria. An optimization model is developed to select the optimum propeller geometry and operational point along the engine load diagram for the selected engines of each case. The engines are selected from the same series due to the same behaviour along the engine load diagram. The propellers are selected from the B-series as fixed-pitch propellers. It has been concluded that while the components of the single-screw propulsion system are larger than the twin-screw, the single-screw propulsion system shows a reduction in fuel consumption than the twin screw by around 19%, thus affecting the amount of exhaust emissions from the ship. This model helps the ship designers to select a suitable propeller to improve the energy efficiency of the ships.

References:

Altosole M, Benvenuto G, Campora U, Laviola M, Zaccone R (2017) Simulation and performance comparison between diesel and natural gas engines for marine applications.Proceedings of the Institution of Mechanical Engineers, Part M:Journal of Engineering for the Maritime Environment 231(2):690-704.https://doi.org/10.1177/1475090217690964
Arapakopoulos A, Polichshuk R, Segizbayev Z, Ospanov S, Ginnis AI, Kostas KV (2019) Parametric models for marine propellers.Ocean Engineering 192:106595.https://doi.org/10.1016/j.oceaneng.2019.106595
Bacciaglia A, Ceruti A, Liverani A (2021) Controllable pitch propeller optimization through meta-heuristic algorithm.Engineering with Computers 37:2257-2271.https://www.doi.org/10.1007/s00366-020-00938-8
Benvenuto G, Campora U (2022) Influence of the marine engine load diagram characteristics on the ship propulsion system performance.International Journal of Frontiers in Engineering and Technology Research 3(2):59-67.https://doi.org/10.53294/ijfetr.2022.3.2.0059
Benvenuto G, Campora U, Altosole M, Balsamo F (2021) Numerical modelling and analysis of the ambient conditions influence on the performance of a marine diesel engine.In:Guedes Soares C, Santos TA Eds.Developments in Maritime Technology and Engineering.Taylor and Francis, London, 463-474
Blount DL, Fox DL (1978) Design considerations for propellers in a cavitating environment.Marine Technology 15(2):144-178.https://www.doi.org/10.5957/mt1.1978.15.2.144
Burrill LC, Emerson A (1963) Propeller cavitation:Further tests on 16in propeller models in the King’s College cavitation tunnel.International Shipbuilding Progress 10(104):119-131.https://www.doi.org/10.3233/isp-1963-1010402
Carlton J (2012) Marine propellers and propulsion.Butterworth-Heinemann, Oxford
Cherednichenko O, Mitienkova V (2020) Analysis of the impact of thermochemical recuperation of waste heat on the energy efficiency of gas carriers.Journal of Marine Science and Application 19(1):72-82.https://doi.org/10.1007/s11804-020-00127-5
Cherednichenko O, Serbin S (2018) Analysis of efficiency of the ship propulsion system with thermochemical recuperation of waste heat.Journal of Marine Science and Application 17(1):122-130.https://doi.org/10.1007/s11804-018-0012-x
Chiong MC, Kang HS, Shaharuddin NMR, Mat S, Quen LK, Ten KH, Ong MC (2021) Challenges and opportunities of marine propulsion with alternative fuels.Renewable and Sustainable Energy Reviews 149:111397.https://doi.org/10.1016/j.rser.2021.111397
Dang J, Van den Boom HJJ, Ligtelijn JT (2013) The Wageningen C-and D-series propellers.12th International Conference on Fast Sea Transportation (FAST)
Du W, Li Y, Zhang G, Wang C, Zhu B, Qiao J (2022) Energy saving method for ship weather routing optimization.Ocean Engineering 258:111771.https://doi.org/10.1016/j.oceaneng.2022.111771
El-Gohary MM (2013) Overview of past, present and future marine power plants.Journal of Marine Science and Application 12(2):219-227.https://doi.org/10.1007/s11804-013-1188-8
El-Gohary MM, Welaya YMA, Saad AA (2014) The use of hydrogen as a fuel for inland waterway units.Journal of Marine Science and Application 13(2):212-217.https://doi.org/10.1007/s11804-014-1243-0
El Gohary MM, Ammar NR (2016) Thermodynamic analysis of alternative marine fuels for marine gas turbine power plants.Journal of Marine Science and Application 15(1):95-103.https://doi.org/10.1007/s11804-016-1346-x
Elkafas AG, Elgohary MM, Zeid AE (2019) Numerical study on the hydrodynamic drag force of a container ship model.Alexandria Engineering Journal 58(3):849-859.https://doi.org/10.1016/j.aej.2019.07.004
Figari M, Theotokatos G, Coraddu A, Stoumpos S, Mondella T (2022) Parametric investigation and optimal selection of the hybrid turbocharger system for a large marine four-stroke dual-fuel engine.Applied Thermal Engineering 208, 117991.https://doi.org/10.1016/j.applthermaleng.2021.117991
Fridell E, Salberg H, Salo K (2021) Measurements of emissions to air from a marine engine fueled by methanol.Journal of Marine Science and Application 20(1):138-143.https://doi.org/10.1007/s11804-020-00150-6
Gaafary MM, El-Kilani HS, Moustafa MM (2011) Optimum design of B-series marine propellers.Alexandria Engineering Journal 50(1):13-18.https://doi.org/10.1016/j.aej.2011.01.001
Hao W (2019) Numerical study of the effect of ship attitude on the perform of ship with air injection in bottom cavity.Ocean Engineering 186, 106119.https://doi.org/10.1016/j.oceaneng.2019.106119
Holtrop J (1984) A statistical re-analysis of resistance and propulsion data.International Shipbuilding Progress 31(363):272-276
Holtrop J (1988) A statistical resistance prediction method with a speed dependent form factor.Proceedings of Scientific and Methodological Seminar on Ship Hydrodynamics (SMSSH ’88).Bulgarian Ship Hydrodynamics Centre, Varna, Bulgaria, 1-7
Holtrop J, Mennen GGJ (1982) An approximate power prediction method.International Shipbuilding Progress 29(335):166-170
Hong Y, Hao LF, Wang PC, Liu WB, Zhang HM, Wang RG (2014) Structural design and multi-objective evaluation of composite bladed propeller.Polymers and Polymer Composites 22(3):275-282.https://doi.org/10.1177/096739111402200308
Huisman J, Foeth E-J, Slot J, Lampe A, Moulijn J, Dang J (2021) Design of the Wageningen F-series.MARIN, Wageningen, Netherlands
Hwang JL, Tsai JF, Li, CY (1995) Cupped propeller test and analysis.Ship Technology Research 42(4):186-192
HydroComp (2018) NavCad:Reliable and confident performance prediction.NH, USA:HydroComp Inc.Available from https://www.hydrocompinc.com/solutions/navcad/.[Accessed on 30 January 2019]
Islam H, Guedes Soares C (2019) Effect of trim on container ship resistance at different ship speeds and drafts.Ocean Engineering 183:106-115.https://doi.org/10.1016/j.oceaneng.2019.03.058
Islam H, Ventura M, Guedes Soares C, Tadros M, Abdelwahab HS (2022) Comparison between empirical and CFD based methods for ship resistance and power prediction.In:Guedes Soares C, Santos TA Eds.Trends in Maritime Technology and Engineering.Taylor & Francis Group, London, 347-357
Jaurola M, Hedin A, Tikkanen S, Huhtala K (2020) A TOpti simulation for finding fuel saving by optimising propulsion control and power management.Journal of Marine Science and Technology 25(2):411-425.https://www.doi.org/10.1007/s00773-019-00651-2
Karatu? ?, Arslano?lu Y, Guedes Soares C (2022) Evaluation of decarbonization strategies for existing ships.In:Guedes Soares C, Santos TA, Eds.Trends in Maritime Technology and Engineering.Taylor & Francis Group, London, 45-54
Keller WH (1973) Extended diagrams for determining the resistance and required power for single-screw ships.International Shipbuilding Progress 20:133-142
Kim K, Tillig F, Bathfield N, Liljenberg H (2014) Hydrodynamic optimization of twin-skeg LNG ships by CFD and model testing.International Journal of Naval Architecture and Ocean Engineering 6(2):392-405.https://doi.org/10.2478/IJNAOE-2013-0187
Latarche M (2020) Pounder’s marine diesel engines and gas turbines.Elsevier Ltd., Oxford
MacPherson DM (1991) Reliable propeller selection for work boats and pleasure craft:techniques using a personal computer.SNAME Fourth Biennial Power Boat Symposium, New Jersey,USA:SNAME
Mallouppas G, Yfantis EA (2021) Decarbonization in shipping industry:a review of research, technology development, and innovation proposals.Journal of Marine Science and Engineering 9(4):415.https://doi.org/10.3390/jmse9040415
Miller G (2022) Ship fuel enters uncharted territory as prices hit new wartime peak.Available from https://www.freightwaves.com/news/ship-fuel-enters-uncharted-territory-as-prices-hit-new-wartime-peak.[Accessed on 10 September 2022]
Mocerino L, Guedes Soares C, Rizzuto E, Balsamo F, Quaranta F (2021) Validation of an emission model for a marine diesel engine with data from sea operations.Journal of Marine Science and Application 20(3):534-545.https://doi.org/10.1007/s11804-021-00227-w
Moreira L, Vettor R, Guedes Soares C (2021) Neural network approach for predicting ship speed and fuel consumption.Journal of Marine Science and Engineering 9(2):119.https://doi.org/10.3390/jmse9020119
Nahim HM, Younes R, Nohra C, Ouladsine M (2015) Complete modeling for systems of a marine diesel engine.Journal of Marine Science and Application 14(1):93-104.https://doi.org/10.1007/s11804-015-1285-y
Najafi S, Pourmostafa M (2022) Investigating the performance of twin marine propellers in different ship wake fields using an unsteady viscous and inviscid solver.Journal of Marine Science and Application 21(2):92-105.https://doi.org/10.1007/s11804-022-00279-6
Nazemian A, Ghadimi P (2021) Multi-objective optimization of ship hull modification based on resistance and wake field improvement:combination of adjoint solver and CAD-CFD-based approach.Journal of the Brazilian Society of Mechanical Sciences and Engineering 44(1):27.https://doi.org/10.1007/s40430-021-03335-4
Nouri NM, Mohammadi S, Zarezadeh M (2018) Optimization of a marine contra-rotating propellers set.Ocean Engineering 167:397-404.https://doi.org/10.1016/j.oceaneng.2018.05.067
Raeie N, Emami S, Karimi Sadaghiyani O (2014) Effects of injection timing, before and after top dead center on the propulsion and power in a diesel engine.Propulsion and Power Research 3(2):59-67.http://dx.doi.org/10.1016/j.jppr.2014.06.001
Seddiek IS, Ammar NR (2021) Harnessing wind energy on merchant ships:case study Flettner rotors onboard bulk carriers.Environmental Science and Pollution Research 28(25):32695-32707.https://www.doi.org/10.1007/s11356-021-12791-3
Stark C, Xu Y, Zhang M, Yuan Z, Tao L, Shi W (2022) Study on applicability of energy-saving devices to hydrogen fuel cell-powered ships.Journal of Marine Science and Engineering 10(3):388.https://doi.org/10.3390/jmse10030388
Stoumpos S, Theotokatos G (2020) Multiobjective optimisation of a marine dual fuel engine equipped with exhaust gas recirculation and air bypass systems.Energies 13(19):5021.https://doi.org/10.3390/en13195021
Tadros M, Ventura M, Guedes Soares C (2019) Optimization procedure to minimize fuel consumption of a four-stroke marine turbocharged diesel engine.Energy 168:897-908.https://doi.org/10.1016/j.energy.2018.11.146
Tadros M, Ventura M, Guedes Soares C (2020a) A nonlinear optimization tool to simulate a marine propulsion system for ship conceptual design.Ocean Engineering 210:107417.https://doi.org/10.1016/j.oceaneng.2020.107417
Tadros M, Ventura M, Guedes Soares C (2020b) Optimization of the performance of marine diesel engines to minimize the formation of SOx emissions.Journal of Marine Science and Application 19(3):473-484.https://www.doi.org/10.1007/s11804-020-00156-0
Tadros M, Ventura M, Guedes Soares C (2021a) Design of propeller series optimizing fuel consumption and propeller efficiency.Journal of Marine Science and Engineering 9(11):1226.https://doi.org/10.3390/jmse9111226
Tadros M, Ventura M, Guedes Soares C (2021b) A review of the use of Biodiesel as a green fuel for diesel engines.In:Guedes Soares C, Santos T Eds.Developments in Maritime Technology and Engineering.Taylor & Francis Group, London, 481-490
Tadros M, Ventura M, Guedes Soares C (2021c) Sensitivity analysis of the steam Rankine cycle in marine applications.In:Guedes Soares C, Santos T Eds.Developments in Maritime Technology and Engineering.Taylor & Francis Group, London, 491-500
Tadros M, Ventura M, Guedes Soares C (2022a) An optimisation procedure for propeller selection for different shaft inclinations.International Journal of Maritime Engineering 164(A3):295-315.https://doi.org/10.5750/ijme.v164iA3.809
Tadros M, Ventura M, Guedes Soares C (2022b) Optimization procedures for a twin controllable pitch propeller of a ROPAX ship at minimum fuel consumption.Journal of Marine Engineering and Technology.https://doi.org/10.1080/20464177.2022.2106623
Tadros M, Ventura M, Guedes Soares C (2022c) Towards fuel consumption reduction based on the optimum contra-rotating propeller.Journal of Marine Science and Engineering 10(11):1657.https://doi.org/10.3390/jmse10111657
Tadros M, Ventura M, Guedes Soares C (2023) Review of current regulations, available technologies, and future trends in the green shipping industry.Ocean Engineering 280, 114670.https://doi.org/10.1016/j.oceaneng.2023.114670
Tadros M, Vettor R, Ventura M, Guedes Soares C (2021d) Coupled engine-propeller selection procedure to minimize fuel consumption at a specified speed.Journal of Marine Science and Engineering 9(1):59.https://doi.org/10.3390/jmse9010059
Tadros M, Vettor R, Ventura M, Guedes Soares C (2022d) Assessment of ship fuel consumption for different hull roughness in realistic weather conditions.Journal of Marine Science and Engineering 10(12):1891.https://doi.org/10.3390/jmse10121891
Tadros M, Vettor R, Ventura M, Guedes Soares C (2022e) Effect of propeller cup on the reduction of fuel consumption in realistic weather conditions.Journal of Marine Science and Engineering 10(8):1039.https://doi.org/10.3390/jmse10081039
Taskar B, Sasmal K, Yiew LJ (2023) A case study for the assessment of fuel savings using speed optimization.Ocean Engineering 274:113990.https://doi.org/10.1016/j.oceaneng.2023.113990
Trivyza NL, Rentizelas A, Theotokatos G, Boulougouris E (2022) Decision support methods for sustainable ship energy systems:A state-of-the-art review.Energy 239:122288.https://doi.org/10.1016/j.energy.2021.122288
Van Lammeren WPA, van Manen JD, Oosterveld MWC (1969) The Wageningen B-screw series.Trans.SNAME 77(8):269-317 Vedachalam S, Baquerizo N, Dalai AK (2022) Review on impacts of low sulfur regulations on marine fuels and compliance options.Fuel 310:122243.https://doi.org/10.1016/j.fuel.2021.122243
Vesting F, Bensow RE (2018) Particle swarm optimization:an alternative in marine propeller optimization? Engineering Optimization 50(1):70-88.https://www.doi.org/10.1080/0305215X.2017.1302438
Vettor R, Tadros M, Ventura M, Guedes Soares C (2016) Route planning of a fishing vessel in coastal waters with fuel consumption restraint.In:Guedes Soares C, Santos TA Eds.Maritime Technology and Engineering 3.Taylor & Francis Group, London, 167-173
Wang P, Tang X, Shi L, Ni X, Hu Z, Deng K (2021) Experimental investigation of the influences of Miller cycle combined with EGR on performance, energy and exergy characteristics of a four-stroke marine regulated two-stage turbocharged diesel engine.Fuel 300, 120940.https://doi.org/10.1016/j.fuel.2021.120940.
Wartsila (2023) Improving efficiency.Available from https://www.wartsila.com/sustainability/climate-and-environment/innovating-for-sustainability/improving-efficiency.[Accessed on 05 May 2023] Wei S, Wu C, Yan S, Ding T, Chen J (2022) Miller cycle with early intake valve closing in marine medium-speed diesel engines.Journal of Marine Science and Application 21(1):151-160.https://doi.org/10.1007/s11804-022-00250-5
Wei S, Zhao X, Liu X, Qu X, He C, Leng X (2019) Research on effects of early intake valve closure (EIVC) miller cycle on combustion and emissions of marine diesel engines at medium and low loads.Energy 173:48-58.https://doi.org/10.1016/j.energy.2019.01.110
Williams A (1975) Single-and twin-screw propulsion of tankers and bulk carriers.First Ship Technology and Research (STAR) Symposium, 26-29 August 1975, Washington, D.C.:Society of Naval Architects and Marine Engineers
Xiang L, Theotokatos G, Ding Y (2023) Parametric investigation on the performance-emissions trade-off and knocking occurrence of dual fuel engines using CFD.Fuel 340, 127535.https://doi.org/10.1016/j.fuel.2023.127535
Xiong Y, Wang Z, Qi W (2013) Numerical study on the influence of boss cap fins on efficiency of controllable-pitch propeller.Journal of Marine Science and Application 12(1):13-20.https://doi.org/10.1007/s11804-013-1166-9
Zaccone R, Ottaviani E, Figari M, Altosole M (2018) Ship voyage optimization for safe and energy-efficient navigation:A dynamic programming approach.Ocean Engineering 153:215-224.https://doi.org/10.1016/j.oceaneng.2018.01.100
Zainol I, Yaakob O (2016) Use of diesel engine and surface-piercing propeller to achieve fuel savings for inshore fishing boats.Journal of Marine Science and Application 15(2):214-221.https://doi.org/10.1007/s11804-016-1336-z
Zetterdahl M, Salo K, Fridell E, Sj?blom J (2017) Impact of aromatic concentration in marine fuels on particle emissions.Journal of Marine Science and Application 16(3):352-361.https://doi.org/10.1007/s11804-017-1417-7

Memo

Memo:
Received date:2023-01-15;Received date:2023-06-15。
Corresponding author:C. Guedes. Soares,E-mail:guedes.soares@centec.tecnico.ulisboa.pt
Last Update: 2024-02-06