|Table of Contents|

Citation:
 Da Li,Haibo Sui,Zhuang Kang,et al.Research on the Viscoelasticity of Polyester Mooring Lines Using the Absolute Nodal Coordinate Formulation[J].Journal of Marine Science and Application,2022,(2):16-23.[doi:10.1007/s11804-022-00273-y]
Click and Copy

Research on the Viscoelasticity of Polyester Mooring Lines Using the Absolute Nodal Coordinate Formulation

Info

Title:
Research on the Viscoelasticity of Polyester Mooring Lines Using the Absolute Nodal Coordinate Formulation
Author(s):
Da Li12 Haibo Sui2 Zhuang Kang2 Liping Sun2
Affilations:
Author(s):
Da Li12 Haibo Sui2 Zhuang Kang2 Liping Sun2
1. Engineering R&D Dept., CNOOC Research Institute Co., Ltd., Beijing, 100028, China;
2. College of Shipbuilding Engineering, Harbin Engineering University, Harbin, 150001, China
Keywords:
Taut mooring|Polyester rope|Absolute nodal coordinate formulation|Viscoelasticity|Chain mooring line|Geometric nonlinearity|Material nonlinearity
分类号:
-
DOI:
10.1007/s11804-022-00273-y
Abstract:
The taut mooring system using synthetic fiber ropes has overcome the shortcomings such as the large self-weight of the mooring lines and provides better mooring performance for the floating structures. The polyester rope has attracted much attention among numerous synthetic fiber rope materials due to its lightweight, low price, corrosion resistance, and high strength. Thus, the mooring characteristics of it are worth studying. Polyester mooring lines are flexible in deep water, when a marine structure is moored by them, the geometric nonlinearity such as large displacement, large stretch, and large bending deformation, and the material nonlinearity like viscoelastic of the polyester ropes become complex integrated problems to be studied. Considering the nonlinear phenomenon, the simulation and calculation of a polyester line were carried out by the absolute nodal coordinate formulation (ANCF) in this paper since the ANCF method has advantages in dealing with the significant deformation problems of the flexible structures. In addition, a chain mooring line was also simulated for comparison, and the results show that the polyester ropes reduce the self-weight of the mooring lines and provide sufficient mooring strength at the same time, and the nonlinear phenomenon of the polyester ropes is different from that of the chain mooring lines.

References:

Ahmed A, Shabana Refaat Y, Yakoub (2001) Three dimensional absolute nodal coordinate formulation for beam elements:theory. Journal of Mechanical Design 123(4):614-621. https://doi.org/10.1115/1.1410100
Beltran J, Williamson E (2010) Numerical Simulation of damage localization in polyester mooring ropes. Journal of Engineering Mechanics 136(8):945-959 https://doi.org/10.1061/(ASCE) EM.1943-7889.0000129
Berzeri M, Campanelli M, Shabana AA (1998) Definition of the Elastic Forces in the Finite Element Formulations. Technical Report OMB No. 0704-0188
Berzeri M, Campanelli M, Shabana AA (2001) Definition of the elastic forces in the finite-element absolute nodal coordinate formulation and the floating frame of reference formulation. Multibody System Dynamics 5(1):21-54. https://doi.org/10.1023/a:1026465001946
Catipovic I, Coric V, Radanovic J (2011) An improved stiffness model for polyester mooring lines. Brodogradnja 62(3):235-248
Ebel H, Matikainen M, Hurskainen V, Mikkola A (2017) Analysis of high-order quadrilateral plate elements based on the absolute nodal coordinate formulation for three-dimensional elasticity. Advances in Mechanical Engineering 9(6):1-12. https://doi.org/10.1177/1687814017705069
Flory J, Banfield S (2006) Durability of polyester ropes used as deepwater mooring lines. OCEANS 200648:1-5. https://doi.org/10.1109/OCEANS.2006.306947
Francois M, Davies P (2008) Characterization of polyester mooring lines. OMAE 2008:Proceedings of the 27th International Conference on Offshore Mechanics and Arctic Engineering 1:169-177. https://doi.org/10.1115/OMAE2008-57136
Garcíd D, a-Vallejo, Valverde J, Domínguez J (2005) An Internal Damping Model for the Absolute Nodal Coordinate Formulation. Nonlinear Dynamics 42(4):347-369. https://doi.org/10.1007/s11071-005-6445-1
Gerstmayr J, Shabana AA (2006) Analysis of thin beams and cables using the absolute nodal co-ordinate formulation. Nonlinear Dynamics 45(1):109-130. https://doi.org/10.1007/s11071-006-1856-1
Huang W, Liu H, Lian Y, Li L (2013) Modeling nonlinear creep and recovery behaviors of synthetic fiber ropes for deepwater moorings. Applied Ocean Research 39:113-120. https://doi.org/10.1016/j.apor.2012.10.004
Kim M, Koo B, Mercier R, Ward E (2005) Vessel/mooring/riser coupled dynamic analysis of a turret-moored fpso compared with otrc experiment. Ocean Engineering 32(14-15):1780-1802. https://doi.org/10.1016/j.oceaneng.2004.12.013
Lian Y, Liu H, Yim S, Zheng J, Xu P (2019) An investigation on internal damping behavior of fiber rope. Ocean Engineering 182(JUN.15):512-526. https://doi.org/10.1016/j.oceaneng.2019.04.087
Lin Z, Sayer P (2015) An enhanced stiffness model for elastic lines and its application to the analysis of a moored floating offshore wind turbine. Ocean Engineering 109(15):444-453. https://doi.org/10.1016/j.oceaneng.2015.09.002
Liu H, Huang W, Lian Y (2014) An experimental investigation on nonlinear behaviors of synthetic fiber ropes for deepwater moorings under cyclic loading. Applied Ocean Research 45(45):22-32. https://doi.org/10.1016/j.apor.2013.12.003
Ma G, Sun L, Wang H (2014) Implementation of a Visco-Elastic Model Into Slender Rod Theory for Deepwater Polyester Mooring Line. American Society of Mechanical Engineers. Volume 8A:Ocean Engineering https://doi.org/10.1115/OMAE2014-23594
Patel M, Orzechowski G, Tian Q, Shabana AA (2016) A new multibody system approach for tire modeling using ANCF finite elements. Proceedings of the Institution of Mechanical Engineers Part K-Journal of Multi-Body Dynamics 230(1):69-84. https://doi.org/10.1177/1464419315574641
Petruska D, Geyer J, Macon R, Craig M, Ran A, Schulz N (2005) Polyester mooring for the mad dog spar-design issues and other considerations. Ocean Engineering 32(7):767-782. https://doi.org/10.1016/j.oceaneng.2004.10.002
Saidpour H, Li L, Vaseghi R (2020) The effect of rope termination on the performance of polyester mooring ropes for marine applications. Ocean Engineering 195:106705. https://doi.org/10.1016/j.oceaneng.2019.106705
Shabana AA (1997) Definition of the slopes and the finite element absolute nodal coordinate formulation. Multibody System Dynamics 1(3):339-348. https://doi.org/10.1023/A:1009740800463
Tahar A, Kim M (2008) Coupled-dynamic analysis of floating structures with polyester mooring lines. Ocean Engineering 35(17-18):1676-1685. https://doi.org/10.1016/j.oceaneng.2008.09.004
Xu S, Wang S, Soares CG (2021) Experimental study of the influence of the rope material on mooring fatigue damage and point absorber response. Ocean Engineering 232(13):108667. https://doi.org/10.1016/j.oceaneng.2021.108667
Zhang C, Kang Z, Ma G, Xu X (2019) Mechanical modeling of deepwater flexible structures with large deformation based on absolute nodal coordinate formulation. Journal of Marine Science and Technology 24:1241-1255. https://doi.org/10.1007/s00773-018-00621-0
Zhang Y, Liu R, Guo H, Deng Z, Zhao H (2016) Analysis of mechanical properties for membrane structure by the absolute nodal coordinate formulation. IEEE International Conference on Mechatronics and Automation, 1262-1267. https://doi.org/10.1109/ICMA.2016.7558743

Memo

Memo:
Received date: 2022-04-14;Accepted date:2022-06-02。
Foundation item:Supported by the Specialized Research Project for LS17-2 Semi-submersible Production Platform (LSZX-2020-HN-05-0405).
Corresponding author:Zhuang Kang,E-mail:kangzhuang@hrbeu.edu.cn
Last Update: 2022-08-17