|Table of Contents|

Citation:
　Peng Liu,Qianqian Chen,Chao Zheng,et al.Reliability Analysis Method of a Control System for Subsea All-Electric Christmas Tree[J].Journal of Marine Science and Application,2021,(2):354-370.[doi:10.1007/s11804-021-00200-7]
Click and Copy

Reliability Analysis Method of a Control System for Subsea All-Electric Christmas Tree

Info

Title:
Reliability Analysis Method of a Control System for Subsea All-Electric Christmas Tree
Author(s):
Peng Liu1;  Qianqian Chen1;  Chao Zheng2;  Guofa Sun1
Affilations:
Author(s):
Peng Liu1;  Qianqian Chen1;  Chao Zheng2;  Guofa Sun1
1. School of Mechanical and Automotive Engineering, Qingdao University of Technology, Qingdao 266520, China;
2. Faculty of Engineering and Physical Sciences, University of Surrey, Guildford GU27XH, UK
Keywords:
Subsea all-electric Christmas tree; Control system; Reliability analysis; Safe production; Dual-factor degradation model; Markov model
分类号:
-
DOI:
10.1007/s11804-021-00200-7
Abstract:
The subsea all-electric Christmas tree (XT) is a key equipment in subsea production systems. Once it fails, the marine environment will be seriously polluted. Therefore, strict reliability analysis and measures to improve reliability must be performed before a subsea all-electric XT is launched; such measures are crucial to subsea safe production. A fault-tolerant control system was developed in this paper to improve the reliability of XT. A dual-factor degradation model for electrical control system components was proposed to improve the evaluation accuracy, and the reliability of the control system was analyzed based on the Markov model. The influences of the common cause failure and the failure rate in key components on the reliability and availability of the control system were studied. The impacts of mean time to repair and incomplete repair strategy on the availability of the control system were also investigated. Research results show the key factors that affect system reliability, and a specific method to improve the reliability and availability of the control system was given. This reliability analysis method for the control system could be applied to general all-electric subsea control systems to guide their safe production.

References:

Abaei MM, Abbassi R, Garaniya V, Chai S, Khan F (2018) Reliability assessment of marine floating structures using Bayesian network. Appl Ocean Res 76:51-60. https://doi.org/10.1016/j.apor.2018.04.004
Artana KB, Pitana T, Dinariyana DP, Ariana M, Kristianto D, Pratiwi E (2018) Real-time monitoring of subsea gas pipelines, offshore platforms, and ship inspection scores using an automatic identification system. J Mar Sci Appl 17(1):101-111. https://doi.org/10.1007/s11804-018-0003-y
Barbosa JD, Santos RC, Romero JFA, Asano PTL, Neto AVS, Camargo JB, Almeida JR, Cugnasca PS (2019) A methodology for reliability assessment of substations using fault tree and Monte Carlo simulation. Electr Eng 101(1):57-66. https://doi.org/10.1007/s00202-019-00756-2
Bhattacharyya SK, Cheliyan AS (2019) Optimization of a subsea production system for cost and reliability using its fault tree model. Reliab Eng Syst Saf 185:213-219. https://doi.org/10.1016/j.ress.2018.12.030
Bitanov A (2015) Reliability study of subsea control module with focus on statistical methods. Master thesis, Norwegian University of Science and Technology, Trondheim, 1-5
Cai B, Liu H, Xie M (2016a) A real-time fault diagnosis methodology of complex systems using object-oriented Bayesian networks. Mech Syst Signal Process 80:31-44. https://doi.org/10.1016/j.ymssp.2016.04.019
Cai B, Liu Y, Xie M (2016b) A dynamic-Bayesian-network-based fault diagnosis methodology considering transient and intermittent faults. IEEE Trans Autom Sci Eng 14(1):276-285. https://doi.org/10.1109/TASE.2016.2574875
Cai B, Shao X, Liu Y, Kong X, Wang H, Xu H, Ge W (2019) Remaining useful life estimation of structure systems under the influence of multiple causes:subsea pipelines as a case study. IEEE Trans Ind Electron 67(7):5737-5747. https://doi.org/10.1109/TIE.2019.2931491
Cao L, Li Z, Guo C, Li P, Meng X, Wang T (2019) Design and test of the MEMS coupled piezoelectric-electromagnetic energy harvester. Int J Precis Eng Manuf 20(4):673-686. https://doi.org/10.1007/s12541-019-00051-x
Cao L, Cai Y, Xu G, Cui J (2020) Research on output characteristics of double-ended fixed beam piezoelectric energy harvester under random excitation. Int J Precis Eng Manuf 21:1075-1083. https://doi.org/10.1007/s12541-020-00322-y
Carroll J, McDonald A, McMillan D (2016) Failure rate, repair time and unscheduled O&M cost analysis of offshore wind turbines. Wind Energy 19(6):1107-1119. https://doi.org/10.1002/we.1887
Chebila M (2018) Simultaneous evaluation of safety integrity’s performance indicators with a generalized implementation of common cause failures. Process Saf Environ Prot 117:214-222. https://doi.org/10.1016/j.psep.2018.04.019
Chen C, Yang Y, Wang M, Zhang X (2018) Characterization and evolution of emergency scenarios using hybrid Petri net. Process Saf Environ Prot 114:133-142. https://doi.org/10.1016/j.psep.2017.12.016
Choi I-H, Chang D (2016) Reliability and availability assessment of seabed storage tanks using fault tree analysis. Ocean Eng 120:1-14. https://doi.org/10.1016/j.oceaneng.2016.04.021
Deyab SM, Taleb-Berrouane M, Khan F, Yang M (2018) Failure analysis of the offshore process component considering causation dependence. Process Saf Environ Prot 113:220-232. https://doi.org/10.1016/j.psep.2017.29010
Don MG, Khan F (2019) Dynamic process fault detection and diagnosis based on a combined approach of hidden Markov and Bayesian network model. Chem Eng Sci 201:82-96. https://doi.org/10.1016/j.ces.2019.01.060
Elusakin T, Shafiee M (2020) Reliability analysis of subsea blowout preventers with condition-based maintenance using stochastic Petri nets. J Loss Prev Process Ind 63:104026. https://doi.org/10.1016/j.jlp.2019.104026
Feng G, Wang D, Garbatov Y, Guedes Soares C (2015) Reliability analysis based on a direct ship hull strength assessment. J Mar Sci Appl 14(4):389-398. https://doi.org/10.1007/s11804-015-1328-4
Henriquez P, Alonso JB, Ferrer MA, Travieso CM (2013) Review of automatic fault diagnosis systems using audio and vibration signals. IEEE Transact Syst Man Cybern:Syst 44(5):642-652. https://doi.org/10.1109/TSMCC.2013.2257752
Hokstad P, Bodsberg L (1989) Reliability model for computerized safety systems. Proceedings of Annual Reliability and Maintainability Symposium, Atlanta, pp 435-440. https://doi.org/10.1109/ARMS.1989.49641
Jones B, Jenkinson I, Yang Z, Wang J (2010) The use of Bayesian network modelling for maintenance planning in a manufacturing industry. Reliab Eng Syst Saf 95(3):267-277. https://doi.org/10.1016/j.ress.2009.42007
Kim S, Chung S, Yang Y (2014) Availability analysis of subsea blowout preventer using Markov model considering demand rate. Int J Naval Architect Ocean Eng 6(4):775-787. https://doi.org/10.2478/IJNAOE-2013-0211
Konovessis D, Cai W, Vassalos D (2013) Development of Bayesian network models for risk-based ship design. J Mar Sci Appl 12(2):140-151. https://doi.org/10.1007/s11804-013-1179-9
Labovská Z, Labovský J, Jelemenský L’, Dudá? J, Marko? J (2014) Model-based hazard identification in multiphase chemical reactors. J Loss Prev Process Ind 29:155-162. https://doi.org/10.1016/j.jlp.2014.02.004
Li W, Cao Q, He M, Sun Y (2018) Industrial non-routine operation process risk assessment using job safety analysis (JSA) and a revised Petri net. Process Saf Environ Prot 117:533-538. https://doi.org/10.1016/j.psep.2018.05.029
Li M, Kang J, Sun L, Wang M (2019) Development of optimal maintenance policies for offshore wind turbine gearboxes based on the non-homogeneous continuous-time Markov process. J Mar Sci Appl 18(1):93-98. https://doi.org/10.1007/s11804-019-00075-9
Lihou DA, Spence GD (1988) Proper use of data with the Weibull distribution. J Loss Prev Process Ind 1(2):110-113. https://doi.org/10.1016/0950-4230(88)80021-4
Liu G, Li H, Qiu Z, Leng D, Li Z, Li W (2019a) A mini review of recent progress on vortex-induced vibrations of marine risers. Ocean Eng 195:106704. https://doi.org/10.1016/j.oceaneng.2019.106704
Liu P, Liu Y, Wei X, Xin C, Sun Q, Wu X (2019b) Performance analysis and optimal design based on dynamic characteristics for pressure compensated subsea all-electric valve actuator. Ocean Eng 191:106568. https://doi.org/10.1016/j.oceaneng.2019.106568
Liu P, Liu Y, Cai B, Wu X, Wang K, Wei X, Xin C (2020) A dynamic Bayesian network based methodology for fault diagnosis of subsea Christmas tree. Appl Ocean Res 94:101990. https://doi.org/10.1016/j.apor.2019.101990
Lyu S, Duan M, Liang W, Chen J, Xie Z (2014) Reliability evaluation for subsea X-mas tree control system based on Bayesian networks. The Twenty-fourth International Ocean and Polar Engineering Conference, Busan, Korea, 271
Matsuoka T, Kobayashi M (1988) GO-FLOW:a new reliability analysis methodology. Nucl Sci Eng 98(1):64-78. https://doi.org/10.13182/NSE88-A23526
Moss TR (2005) The reliability data handbook. Wiley-Blackwell, Hoboken, pp 32-37
Nhat DM, Venkatesan R, Khan F (2020) Data-driven Bayesian network model for early kick detection in industrial drilling process. Process Saf Environ Prot 138:130-138. https://doi.org/10.1016/j.psep.2020.03.017
Participants O (2002) OREDA offshore reliability data handbook. vol. 4th. Det Norske Veritas, Høvik, pp 102-127
Ramos AG, de Souza GFM (2017) Availability assessment of an offshore gas treatment system using Stochastic Petri Nets. The 27th International Ocean and Polar Engineering Conference, California, USA, 197
Rathnayaka S, Khan F, Amyotte P (2012) Accident modeling approach for safety assessment in an LNG processing facility. J Loss Prev Process Ind 25(2):414-423. https://doi.org/10.1016/j.jlp.2011.09.006
Sakurahara T, Schumock G, Reihani S, Kee E, Mohaghegh Z (2019) Simulation-informed probabilistic methodology for common cause failure analysis. Reliab Eng Syst Saf 185:84-99. https://doi.org/10.1016/j.ress.2018.12.007
Sandtorv HA, Hokstad P, Thompson DW (1996) Practical experience with a data collection project:the OREDA project. Reliab Eng Syst Saf 51(2):159-167. https://doi.org/10.1016/0951-8320(95)00113-1
Silva AHM, da Hora, HRM, Fernandes RM (2018) Reliability assessment of a subsea electro-hydraulic control system. Proceedings IRF2018:6th International Conference Integrity-Reliability-Failure, Lisbon, 1031-1038
Stendebakken OI (2014) A reliability study of a deepwater vertical Xmas tree with attention to XT retrieval rate. Master thesis, Institutt for Marin Teknikk, Norwegian, 21-50
Toroody AB, Abaiee MM, Gholamnia R, Ketabdari MJ (2016) Epistemic-based investigation of the probability of hazard scenarios using Bayesian network for the lifting operation of floating objects. J Mar Sci Appl 15(3):250-259. https://doi.org/10.1007/s11804-016-1361-y
Venkatasubramanian V, Rengaswamy R, Kavuri SN (2003) A review of process fault detection and diagnosis:Part II:Qualitative models and search strategies. Comput Chem Eng 27(3):313-326. https://doi.org/10.1016/S0098-1354(02)00161-8
Volovoi V (2004) Modeling of system reliability Petri nets with aging tokens. Reliab Eng Syst Saf 84(2):149-161. https://doi.org/10.1016/j.ress.2003.84013
Wang X, Jia P, Lizhang H, Wang L, Yun F, Wang H (2018) Reliability and safety modelling of the electrical control system of the subsea control module based on Markov and multiple beta factor model. IEEE Access 7:6194-6208. https://doi.org/10.1109/ACCESS.2018.2889104
Wang H, Yajima A, Castaneda H (2019a) A stochastic defect growth model for reliability assessment of corroded underground pipelines. Process Saf Environ Prot 123:179-189. https://doi.org/10.1016/j.psep.2019.01.005
Wang L, Wang X, Lizhang H, Jia P, Yun F, Wang H (2019b) Design and reliability analysis of the electrical control system of the subsea control module. Proc Inst Mech Eng Part I:J Syst Control Eng 233(6):720-733. https://doi.org/10.1177/0959651818821199
Wang Y, Zhang P, Qin G (2019c) Non-probabilistic time-dependent reliability analysis for suspended pipeline with corrosion defects based on interval model. Process Saf Environ Prot 124:290-298. https://doi.org/10.1016/j.psep.2019.02.028
Wang Y, Hou X, Zhang P, Qin G (2020) Reliability assessment of multi-state reconfiguration pipeline system with failure interaction based on Cloud inference. Process Saf Environ Prot 137:116-127. https://doi.org/10.1016/j.psep.2020.02.019
Wanvik PG (2015) Reliability assessment of subsea X-mas tree configurations. Master thesis, Norwegian University of Science and Technology, Trondheim, 12-30
Xie X, Guo D (2018) Human factors risk assessment and management:process safety in engineering. Process Saf Environ Prot 113:467-482. https://doi.org/10.1016/j.psep.2017.11.018
Yu J, Zhao HL (2013) All-electric subsea production control system. Appl Mech Mater Trans Tech Publ 251:196-200. https://doi.org/10.4028/www.scientific.net/AMM.251.196
Zhang H, Innal F, Dufour F, Dutuit Y (2014) Piecewise deterministic Markov processes based approach applied to an offshore oil production system. Reliab Eng Syst Saf 126:126-134. https://doi.org/10.1016/j.ress.2014.01.016
Zhang J, Liu Y, Lundteigen M, Bouillaut L (2016) Using Bayesian networks to quantify the reliability of a subsea system in the early design. Risk, Reliability and Safety:Innovating Theory and Practice:Proceedings of ESREL 2016, Glasgow, Scotland, 404

Memo

Memo:
Received date:2020-04-08;Accepted date:2020-12-09。
Foundation item:This study is supported by the National Natural Science Foundation of China under Grant No. 61703224.
Corresponding author:Peng Liu, peng_liu@qut.edu.cn
Last Update: 2021-09-06