|Table of Contents|

Citation:
 Vishakh S. Kumar,Prabhu Rajagopal.Modelling and Analysis of Turning Motion of a Subsurface Mapping AUV with Split-Hull Design[J].Journal of Marine Science and Application,2021,(2):284-301.[doi:10.1007/s11804-021-00211-4]
Click and Copy

Modelling and Analysis of Turning Motion of a Subsurface Mapping AUV with Split-Hull Design

Info

Title:
Modelling and Analysis of Turning Motion of a Subsurface Mapping AUV with Split-Hull Design
Author(s):
Vishakh S. Kumar Prabhu Rajagopal
Affilations:
Author(s):
Vishakh S. Kumar Prabhu Rajagopal
Centre for Nondestructive Evaluation, Department of Mechanical Engineering, IIT Madras, Chennai 600036, Tamil Nadu, India
Keywords:
Autonomous underwater vehicleTurning diameterDynamic modellingFluid forceJoint torque
分类号:
-
DOI:
10.1007/s11804-021-00211-4
Abstract:
There is much need for autonomous underwater vehicles (AUVs) for inspection and mapping purposes. Most conventional AUVs use torpedo-shaped single-rigid hull, because of which their manoeuvrability is limited. Moreover, any increase in payload results in a larger hull size and the turning diameter, limiting its operation in constrained areas. As a solution to this problem, we develop M-Hull, a subsurface mapping AUV with a modular-split hull design that provides better manoeuvrability than a conventional torpedo-shaped vehicle. At the same time, it has more agility than an unconventional bio-inspired snake-like vehicle though their designs look similar. This approach makes it a hybrid solution between conventional torpedo-shaped AUVs and unconventional bio-inspired vehicles. We focus on improving the turning diameter during the mapping operation, and hence this paper concentrates on the dynamic aspects of the 2D turning motion of the vehicle. It will provide the relationship between turning speed, thrust, and joint torque requirements for the multi-hull underwater vehicle. Different turning modes are compared to choose an optimum turning configuration, and the critical speed is calculated for the vehicle’s safe operation. In the end, the modelling is verified using the experimental data. One can follow the method followed here for the 2D motion analysis of similar underwater vehicles.

References:

Abreu PC, Botelho J, Góis P, Ribeiro J (2016) The medusa class of autonomous marine vehicles and their role in eu projects. In:OCEANS 2016-Shanghai, pp 1-10
Alvarez A, Caffaz A, Caiti A, Casalino G (2009) Fòlaga:a low-cost autonomous underwater vehicle combining glider and AUV capabilities. Ocean Eng 36(1):24-38. https://doi.org/10.1016/j.oceaneng.2008.08.014
Antonelli G (2014) Underwater robots. In:Springer Tracts in Advanced Robotics, vol 96. Springer Tracts in Advanced Robotics, pp 418-446
Antonelli G, Fossen T I, Yoerger D R (2016) Modeling and control of underwater robots. In:Springer Handbook of Robotics. Springer, pp 1285-1306
Betsch (2018) Computational dynamics Altenbach H, Öchsner A (eds), Springer, Berlin. https://doi.org/10.1007/978-3-662-53605-6_22-1
Chen W, Xia D, Liu J (2008) Modular design and realization of a torpedo-shape robot fish. In:Proceedings of 2008 IEEE International Conference on Mechatronics and Automation, ICMA 2008, Takamatsu, pp 125-130
Choi H-T, Choi J (2015) Requirements and design of highly accurate position control system for underwater visual inspection. In:OCEANS 2015-Genova, pp 1-5. https://doi.org/10.1109/OCEANS-Genova.2015.7271568, http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=7271568
Cox R G (1970) The motion of long slender bodies in a viscous fluid. Part 1. General theory. J Fluid Mech 44:791-810. https://doi.org/10.1017/S002211207000215X
Crespi A J A (2006) AmphiBot II:an amphibious snake robot that crawls and swims using a central pattern generator. Conference on Climbing and Walking Robots, London, pp 19-27
Eriksen C C, Osse T J, Light R D, Wen T (2001) Seaglider:a long-range autonomous underwater vehicle for oceanographic research. IEEE J Ocean Eng 26(4):424-436. https://doi.org/10.1109/48.972073
German C R, Yoerger D R (2008) Hydrothermal exploration with the autonomous benthic explorer. Oceanograph Res Papers 55 (2):203-219. https://doi.org/10.1016/j.dsr.2007.11.004, http://www.sciencedirect.com/science/article/pii/S0967063707002580
Gherairi O, Ben Hamed M (2017) Kinematic model of underwater vehicle. In:International Conference on Green Energy Conversion Systems (GECS). IEEE, Hammamet, pp 1-5. http://ieeexplore.ieee.org/document/8066245/
Gus’kova N Y, Makhortykh GV, Shcheglova MG (1998) Inertia and drag of elliptic cylinders oscillating in a fluid. Fluid Dyn 33(1):91-95. UDC:532.582.3L013.2
Jagadeesh P, Murali K, Idichandy V G (2009) Experimental investigation of hydrodynamic force coefficients over AUV hull form. Ocean Eng 36(1):113-118. https://doi.org/10.1016/j.oceaneng.2008.11.008
Kato N, Ito Y, Kojima J (1994) Control performance of autonomous underwater vehicle "AQUA EXPLORER 1000" for inspection of underwater cables. Proceedings of OCEANS’94, Brest, pp 135-140. https://doi.org/10.1109/OCEANS.1994.363845, http://ieeexplore.ieee.org/lpdocs/epic03/wrapper.htm?arnumber=363845%5Cn
Kelasidi E, Pettersen K Y (2015) Energy efficiency of underwater robots. 10th IFAC Conference on Manoeuvring and Control of Marine Craft, Copenhagen, Denmark 28(16):152-159. https://doi.org/10.1016/j.ifacol.2015.10.273
Kelasidi E, Pettersen K Y, Liljeback P (2016) Locomotion efficiency of underwater snake robots with thrusters. SSRR 2016-International Symposium on Safety, Security and Rescue Robotics, Lausanne, pp 174-181. https://doi.org/10.1109/SSRR.2016.7784295
Kelasidi E (2015) Modeling, control and energy efficiency of underwater snake robots. Ph.D thesis, Norwegian University of Science and Technology (NTNU),Trondheim, Norway
Khalil W, Gallot G (2007) Dynamic modeling and simulation of a 3-D serial eel-like robot. IEEE Trans Syst Man Cybern Part C (Appl Rev) 37(6):1259-1268. https://doi.org/10.1109/TSMCC.2007.905831
Kumar V S, Rajagopal P (2019) Development and analysis of an autonomous underwater inspection vehicle with enhanced maneuverability. In:OCEANS 2019-Marseille, France, pp 1-8
Kunz C, Murphy C, Singh (2009) Toward extraplanetary under-ice exploration:Robotic steps in the Arctic. J Field Robot 26(4):411-429. https://doi.org/10.1002/rob.20288
Liljeback P, Stavdahl O (2014) Mamba-A waterproof snake robot with tactile sensing. In:IEEE International Conference on Intelligent Robots and Systems, Chicago, pp 294-301
Liljeback P, Mills R (2017) Eelume:a flexible and subsea resident IMR vehicle. OCEANS 2017, Aberdeen, pp 1-4. https://doi.org/10.1109/OCEANSE.2017.8084826
Lin X (2011) Development of a spherical underwater robot. In:2011 IEEE/ICME International Conference on Complex Medical Engineering, CME 2011, Heilongjiang, pp 662-665. https://doi.org/10.1109/ICCME.2011.5876823
Madhan R, Desa E, Prabhudesai S (2006) Mechanical design and development aspects of a small AUV-Maya. In:7th IFAC Conference on Manoeuvring and Control of Marine Craft, Lisbon, pp 1-6. http://drs.nio.org/drs/handle/2264/702
Morison JR, Johnson JW, Schaaf SA (1950) The force exerted by surface waves on piles. J Pet Technol 2(5):149-154. https://doi.org/10.2118/950149-G
Newman J N J N, Grue J (1977) Marine hydrodynamics. The Massachusetts Institute of Technology (MIT) Press Cambridge, UK, pp 426. https://mitpress.mit.edu/books/marine-hydrodynamics-40th-anniversary-edition
Prestero T (2001) Verification of a six-degree of freedom simulation model for the REMUS100 AUV. MS Thesis, Massachusetts Institute of Technology, Cambridge, pp vol 1
Punning A, Anton M (2004) A biologically inspired ray-like underwater robot with electroactive polymer pectoral fins. International Conference on Mechatronics and Robotics, Istanbul. https://doi.org/10.1080/19475411.2012.686458
Robotics B (2020) Blue robotics t100. https://www.bluerobotics.com/store/thrusters/t100thruster.[Accessed on 19-06-2020]
Rollinson D (2014) Control and design of snake robots. Ph.D thesis, School of Computer Science Carnegie Mellon University Pittsburgh, PA. http://repository.cmu.edu/dissertations/427
Shabana A A (2013) Dynamics of multibody systems. In:Dynamics of Multibody Systems. 1st edn. Cambridge University Press, Cambridge, England, pp 72-89
Sverdrup-Thygeson J, Kelasidi E (2018) The underwater swimming manipulator-a bioinspired solution for subsea operations. IEEE J Ocean Eng 43(2):402-417. https://doi.org/10.1109/JOE.2017.2768108
Tamura K, Aoki T, Nakamura T (2000) The development of the auv-urashima. In:OCEANS 2000 MTS/IEEE Conference, Providence, pp vol 1, pp 139-146
Venugopal V, Varyani K S, Westlake P C (2009) Drag and inertia coefficients for horizontally submerged rectangular cylinders in waves and currents. J Eng Maritime Environ 223(1):121-136. https://doi.org/10.1243/14750902JEME124
Wang S, Wang Y, Wei Q, Tan M, Yu J (2017) A bio-inspired robot with undulatory fins and its control methods. IEEE/ASME Trans Mechatron 22(1):206-216. https://doi.org/10.1109/TMECH.2016.2622761
Wiens A J, Nahon M (2012) Optimally efficient swimming in hyper-redundant mechanisms:control, design, and energy recovery. Bioinspir Biom 7(4):046016. https://doi.org/10.1088/1748-3182/7/4/046016
Yu J, Wang L (2007) Geometric optimization of relative link lengths for biomimetic robotic fish. IEEE Trans Robot 23(2):382-386. https://doi.org/10.1109/TRO.2007.892221
Zhang C, Hedrick T L, Mittal R (2015) Centripetal acceleration reaction:an effective and robust mechanism for flapping flight in insects. PloS one 10(8):e0132093. https://doi.org/10.1371/journal.pone.0132093
Zuo Z, Wang Z (2008) Serpentine locomotion of a snake-like robot in water environment. In:2008 IEEE International Conference on Robotics and Biomimetics, ROBIO, Bangkok, pp 25-30

Memo

Memo:
Received date:2020-10-22;Accepted date:2021-03-15。
Corresponding author:Vishakh S. Kumar, vishakhskumar1995@gmail.com;Prabhu Rajagopal, prajagopal@iitm.ac.in
Last Update: 2021-09-06