«Previous Article|Table of Contents|Next Article»

Journal of Marine Science and Application[ISSN:1002-2848/CN:61-1400/f]

卷:

期数:

2010年3

页码:

274

栏目:

出版日期:

2010-09-25

Info

Title:

Simulation and Experimental Research for Piping Damper with Plunger-type Accumulator

Author(s):

Xiao-hui Luo; Jun-hua Hu Xiao-bin Wang and Zi-hua Niu

Affilations:

Author(s):

Xiao-hui Luo; Jun-hua Hu  Xiao-bin Wang and Zi-hua Niu

Keywords:

plunger-type accumulator;  piping damper;  impact displacement;  low speed resistance;  locking speed

分类号:

-

DOI:

1671-9433(2010)03-0274-06

Abstract:

It can be beneficial to reduce vibrations in shipboard piping, so the authors designed a new kind of piping damper with a plunger-type accumulator. Special requirements for the piping damper included low impact displacement, low speed, as well as an appropriate locking speed. Inside the damper, a plunger-type accumulator was installed and on the outside of the piston rod, a tube with exposed corrugations was added. Between the piston and the cylinder, a clearance seal was added. Using mathematical modeling, the effects of the dynamic performance of the damper’s impact displacement on vibrations were observed. Changes to the clearance between the piston and the cylinder, the stiffness of the spring in the accumulator, the throttle valve size, and locking speed resistance of the damper were respectively simulated and studied. Based on the results of the simulation, dampers with optimal parameters were developed and tested with different accumulator spring stiffnesses and different throttles. The simulation and experimental results showed that parameters such as seal clearance between piston and cylinder, accumulator spring stiffness and throttle parameters have significant effects on the damper’s impact displacement, low speed resistance and locking speed.

References:

 

Jia Jiuhong, Zhang Zhenhua,Du Jianye, Wang Yu (2008). Design and experimental study on a retrofitted damper.Journal of Vibration and Shock, 27(2), 69-71.

Jiang Hongchun, Cai Jining(2007). Finite element analysis of axial stiffness and stresses of extrudedmetal bellow tube used in mechanical seal. ProcessEquipment & Piping, 44(5),13-17.

Makris N, Dargush GF, ConstantinouMC (1995). Dynamic analysis of viscoelastic-fluid dampers. Journal of Engineering Mechanics, 121(10), 1114-1121.

Masopust R, Podroyzhek I(1989). Use of GERB vibration dampers to protect pipelines and equipment onnuclear power stations in Czechoslovakiaagainst seismic shocks. Soviet EnergyTechnology, 27(8), 56-59.

McCloy D, Matin H (1980). Control of Fluid Power: Analysis and design.Ellis Horwood Limited, New York, America, 62-67.

Niwa Naoki, Kobori Takuji, TakahashiMotoichi (2000). Dynamic loading test and simulation analysis of full-scalesemi-active hydraulic damper for structural control. Earthquake Engineering and Structural Dynamics, 29(6), 789-812.

Slocum AH, Marsh ER, Smith DH(1994). New damper design for machine tool structures: the replicated internalviscous damper. Precision Engineering,16(3), 174-183.

Verma V, GhoshAK, KushwahaHS (2002). Dynamic characteristics of a hydraulic damper. ASME 2002 Pressure Vessels and Piping Conference, Vancouver, Canada,149-156.

Whittaker AS, Constantinou MC(2005). Building structures with damping systems: From research to designpractice. Proceedings of the 2005 StructuresCongress and the 2005 Forensic Engineering Symposium, New York, 1819-1826.

Wu Hiaqiao, Li Yongsheng(1997). Study on the spring rate of polytetrafluoroethylene (PTFE) bellows. Pressure Vessel Technology, 14(2), 20-24.

Memo

Memo:

-

Commonly used function

Last Update: 2010-09-20