Citation:
Hassan GHASSEMI.Hydrodynamic characteristics of the surface-piercing propellers for the planing craft[J].Journal of Marine Science and Application,2009,(4):267-274.
Click and Copy
Hydrodynamic characteristics of the surface-piercing propellers for the planing craft
Hassan GHASSEMI.Hydrodynamic characteristics of the surface-piercing propellers for the planing craft[J].Journal of Marine Science and Application,2009,(4):267-274.
Info
- Title:
- Hydrodynamic characteristics of the surface-piercing propellers for the planing craft
- Author(s):
- Hassan GHASSEMI
- Affilations:
- DOI:
- -
- Abstract:
- Demand for high-speed marine vehicles (HSMVs) is high among both commercial and naval users. It is the duty of the marine vessel’s designer to provide a hull and propulsion system that diminishes drag, improves propulsive efficiency, increases safety and improves maneuverability. From the propulsor side, surface piercing propellers (SPPs) should improve performance. Unlike immersed propellers, behavior of the SPP is affected by depth of immersion, Weber number and shaft inclination angle. This paper uses a practical numerical method to predict the hydrodynamic characteristics of an SPP. The critical advance velocity ratio is derived using the Weber number and pitch ratio in the transition mode, then the potential based boundary element method (BEM) is used on the engaged surfaces. Two models of three and six-bladed SPPs (SPP-1 and SPP-2) were selected and some results are shown.
References:
[1] ROSE C J, KRUPPA C F L, KOUSHAN K. Surface piercing propellers, propeller/Hull interaction[C]// FAST’93.
[2] KRUPPA F L C, ROSE C J. Methodical Series Model Test Results[C]//FAST’91.
[3] NOZAWA K, TAKAYAMA N. Experimental study on propulsive performance of surface piercing propeller[C]// KSNAJ, 2002.
[4] PUSTOSHNY V A, BOINTSOV V, LEBEDEV P E, STROGANOV A. Development of 5-blade SPP series for fast speed boat[C]// Proceeding of the 9th international Conference on Fast Sea, Shanghai, 2007.
[5] FERRANDO M, SCAMARDELLA A. Surface piercing propellers: testing methodologies, result analysis and comments on open water characteristics[C]// Proc. Small Craft Marine Engineering Resistance & Propulsion Symposium, 1996, pp.5-1 , 5-27. Ypsilanti: University of Michigan.
[6] FERRANDO M. Surface piercing propellers: state of the art, Oceanic Eng. International, 1997, 1(2): 40-49.
[7] FERRANDO M, SCAMARDELLA A. Surface piercing propellers: model tests procedures and comments on related dimensional parameters[C]// Proceedings 5th Symposium on High Speed Marine Vehicles, Capri 1999: 24-26.
[8] FERRANDO M, VIVIANI M, CROTTI S, CASSELLA P, CALDARELLA S. Influence of Weber number on Surface Piercing Propellers model tests scaling[C]// Proceedings of 7th International Conference on Hydrodynamics (ICHD), Ischia, 2006: 4-6.
[9] FERRANDO M, SCAMARDELLA A, BOSE N, LIU P, VEITCH B. Performance of family of surface piercing propellers. Royal Institution for Naval Architects (RINA) Transactions 2002, Part A 11p. YIN L. YOUNG, ZHANKE LIU, Performance Prediction of Newton-Rader Propellers, Journal of Ship Research, 2008, 52(2): 124-145.
[10] OLOFSSON N. Force and flow characteristics of a partially submerged propeller[D]. Gutenberg: Chalmers University of Technology–Department of Naval Architecture and Ocean Engineering, 1996.
[11] YOUNG Y L, KINNAS S A. Analysis of super-cavitating and surface-piercing propeller flows via BEM[J]. Computational Mechanics, 2003, 32: 269–280.
[12] GHASSEMI H, GHIASI M. Hydrodynamic characteristics of the surface piercing propeller (SPP) by using special practical and numerical approach[C]// Proceeding of the 8th Int. conf. on Hydrodynamics (ICHD2008). Nantes, France.
[13] GHASSEMI H, SHADEMANI R. Hydrodynamic characteristics of the surface-piercing propeller for the planing craft[C]// Proceedings of the 28th Int. Conf. of OMAE2009. Honolulu, Hawaii.
Memo
- Memo:
- -
