Click and Copy
Application of dual reciprocity boundary element method to predict acoustic attenuation characteristics of marine engine exhaust silencers
Info
- Title:
- Application of dual reciprocity boundary element method to predict acoustic attenuation characteristics of marine engine exhaust silencers
- Author(s):
- JI Zhen-lin WANG Xue-ren
- Affilations:
- DOI:
- -
- Abstract:
- In marine engine exhaust silencing systems,the presence of exhaust gas flow influences the sound propagation inside the systems and the acoustic attenuation performance of silencers.In order to investigate the effects of three-dimensional gas flow and acoustic damping on the acoustic attenuation characteristics of marine engine exhaust silencers,a dual reciprocity boundary element method (DRBEM)was developed.The acoustic governing equation in three-dimensional potential flow was derived first,and then the DRBEM numerical procedure is given.Compared to the conventional boundary elementmethod (CBEM),the DRBEM considers the second order terms of flow Mach number in the acoustic governing equation,so it is suitable for the cases with higher Mach number subsonic flow.For complex exhaust silencers,it is difficult to apply the single-domain boundary element method,so a substructure approach based on the dual reciprocity boundary element method is presented.The experiments for measuring transmission loss of silencers are conducted,and the experimental setup and measurements are explained.The transmission loss of a single expansion chamber silencer with extended inlet and outlet were predicted by DRBEM and compared with the measurements.The good agreements between predictions and measurements are observed,which demonstrated that the derived acoustic governing equation and the DRBEM numerical procedure in the present study are correct.
References:
1. MUNJAL M L Acoustics of ducts and mufflers 1987
2. SEYBERT A F.CHENG C Y R Application of the boundary element method to acoustic cavity response and muffler analysis 1987
3. JI Z L.MA Q.ZHANG Z H Application of the boundary element method to predicting acoustic performance of expansion chamber mufflers with mean flow 1994(01)
4. JI Z L.MA Q.ZHANG Z H A boundary element scheme for evaluation of the four-pole parameters of ducts and mufflers with low Mach number non-uniform flow 1995(01) 5. NARDINI D.BREBBIA C A A new approach to free vibration analysis using boundary elements 1982
6. PARTRIDGE P W.BREBBIA A.WROBEL L C The Dual reciprocity boundary element methods 1992
7. LEE L.WU T W.ZHANG P A dual-reciprocity method for acoustic radiation in a subsonic non-uniform flow 1994
8. PERREY-DEBAIN E Analysis of convergence and accuracy of the DRBEM for axisymmetric Helmholtz-type equation 1999
9. DOKUMACI E An integral equation formulation for boundary element analysis of acoustic radiation problems in viscous fluids 1991(02)
10. KARRA C.BEN TAHAR M An integral equation formulation for boundary element analysis of propagation in viscothermal fluids 1997(03)
11. BOSSART R.JOLY N.BRUNEAU M Hybrid numerical and analytical solutions for acoustic boundary Problems in thermo-viscous fluids 2003
12. TEMKIN S L Elements of acoustics 1981
13. CHEN C S.RASHED Y F Evolution of thin plate spline based particular solutions for Helmholtz-type equation for the DRM 1998(02)
14. ZHANG Y L.ZHU S P On the choice of interpolation functions used in the dual reciprocity boundary element method 1994
15. LOU G.WU T W.CHENG C Y R Boundary element analysis of packed silencers with a substrueturing technique 2003
16. WANG X R.ZHANG W P.ZHU M G Development of a test bed for measurement of marine diesel engine exhaust silencer performance [期刊论文] -Chinese Internal Combustion Engine Engineering2006
17. CHUNG J Y.BLASER D A Transfer fimction method of measuring acoustic intensity in a duct system with flow 1980
18. TAO Z.SEYBERT A F A Review of current techniques for measuring muffler transmission loss 2003
Memo
- Memo:
- -
